JLab Fit Sport 3 Wireless Earbuds
Thank you for purchasing a JLab Audio product. We stand behind our products with great customer support.
Product Overview
Model: Fit Sport 3 Wireless Earbuds
Product Warranty: All warranty claims are subject to JLab Audio's approval and discretion. Please retain your proof of purchase for warranty service. [Visual Description: Warranty seals indicating '2-year warranty' and 'U.S. BASED CUSTOMER SUPPORT'.]
Contact Us: For inquiries, please contact support@jlabaudio.com or visit intl.jlabaudio.com/contact.
Register Your Product: Visit intl.jlabaudio.com/register for product updates, tips, and FAQs. [Visual Description: A link to register the product, with text for product updates, tips, and FAQs.]
Initial Setup: Bluetooth Pairing
Step 1: Enable Bluetooth
On your device's settings menu, turn on Bluetooth. [Visual Description: A smartphone screen showing the Settings menu with the Bluetooth option highlighted and toggled on.]
Step 2: Enter Pairing Mode
Press and hold the button on the earbuds for 10 seconds. Release the button. The indicator light will flash red and blue, signaling that the earbuds have entered pairing mode. [Visual Description: A close-up of the earbud's control button, with an indicator light shown flashing red and blue.]
Step 3: Connect to "JLab BT"
In your device's Bluetooth settings, select "JLab BT" to connect. Once Bluetooth pairing is complete, the blue indicator light will flash slowly. [Visual Description: A smartphone screen showing Bluetooth settings with "JLab BT" selected and connected. The earbud indicator light is shown flashing slowly blue.]
Repeat Use
Once your JLab Fit Sport 3 earbuds are paired with a device, they will automatically connect to that Bluetooth device whenever they are powered on. [Visual Description: An illustration showing the earbuds being powered on and automatically connecting to a paired smartphone.]
Equalizer (EQ) Modes
Quickly press both buttons to cycle through the three EQ settings for the Fit Sport 3:
- JLab Signature: Features JLab C3™ signature sound with enhanced vocals and bass.
- Balanced (two beeps): Provides an even sound profile with no additional sound enhancement.
- Bass Boost (three beeps): Enhances bass and sub-bass frequencies for a deeper sound.
Audio Cues
- Power On: Chime sound.
- Bluetooth Connected: Two beeps.
- Low Battery: Voice prompt "Low Battery" (below 20%).
- Power Off: Chime sound.
Charging
Step 1: Connect to Power
Open the USB port cover on the earbuds. Connect the charging cable to the earbuds and then to a computer or USB power source. Ensure the power source is 5V or less. [Visual Description: An illustration showing the earbud's USB port cover being opened, a USB cable connecting to the earbud, and the other end connecting to a computer or wall adapter.]
Step 2: Charging Indicator
The indicator light will turn red while charging and will turn blue when charging is complete. [Visual Description: Two diagrams showing the earbud's indicator light: one red for charging, and one blue for fully charged.]
Wearing Instructions
Step 1: Select Ear Tips and Cush Fins
Choose the appropriate ear tip size and Cush Fin for the best fit and comfort. Experiment with different ear tips for optimal sound isolation and comfort. [Visual Description: A selection of different sized ear tips and Cush Fins.]
Step 2: Adjust Tip Placement
Move the earphone to the desired position using the adjustable tip placement feature to ensure a secure fit. [Visual Description: An earbud with an adjustable tip, showing how it can be moved.]
Step 3: Insert and Rotate
Start by inserting the earbud from the back, then rotate it around your ear for a snug and stable fit. [Visual Description: A diagram illustrating the correct way to insert and rotate the earbud into the ear.]
Step 4: Secure the Cable
Route and secure the cable from the front, back, and bottom to keep it tidy and prevent it from snagging. [Visual Description: Diagrams showing how to route the earbud cable behind the ear and under the chin.]
Using the Cable Clip
Step 1: Attach Clip
Attach the included cable clip to the middle section of the earbud cable. [Visual Description: An illustration showing the cable clip being attached to the earbud cable.]
Step 2: Secure to Clothing
Clip the cable to the back or front of your shirt for a secure and tangle-free experience. [Visual Description: A diagram showing the cable clip attached to the collar of a shirt.]
Troubleshooting Connection Issues
Problem: JLab BT does not appear on your device.
- Turn off Bluetooth on your device, then re-enter the device's settings menu. [Visual Description: A smartphone screen showing Bluetooth toggled off.]
- If JLab BT still does not appear, repeat the initial setup process as described in the "Bluetooth Pairing" section. [Visual Description: A smartphone screen showing Bluetooth toggled on.]
Problem: JLab BT does not automatically connect when powered on.
- Remove "JLab BT" from your device's Bluetooth settings. [Visual Description: A smartphone screen showing "JLab BT" selected in the Bluetooth settings list.]
- Repeat the initial setup process as described in the "Bluetooth Pairing" section. [Visual Description: A smartphone screen showing Bluetooth toggled on.]
- Once Bluetooth pairing is complete, the blue indicator light will flash slowly. [Visual Description: A smartphone screen showing "JLab BT" connected, with the earbud indicator light flashing slowly blue.]
Problem: Bluetooth connects to an unwanted device.
Note: JLab BT can remember up to 8 devices. It will attempt to automatically connect to the last used device.
- If you have previously paired with multiple devices, turn off Bluetooth on the unwanted device and then turn on Bluetooth on the desired device. [Visual Description: A smartphone screen showing Bluetooth toggled on.]
- Press and hold the earbud button for 10 seconds until the light flashes red and blue (pairing mode). Release the button. Select "JLab BT" in your device's Bluetooth settings to connect. The blue indicator light will flash slowly upon successful pairing. [Visual Description: An earbud indicator light flashing red and blue, then slowly blue. A smartphone screen shows "JLab BT" connected.]
Warnings and Precautions
Warnings:
- Ensure the USB port cover is closed properly. This protects the product from damage caused by sweat and water. [Visual Description: An illustration of the earbud with its USB port cover closed, accompanied by a warning symbol indicating protection from water/sweat.]
- The Fit Sport 3 earbuds must be completely dry before charging. Exposure to moisture can damage internal components. It is best to air dry them before charging. [Visual Description: An illustration of earbuds being air-dried.]
Precautions:
- Avoid getting moisture or liquid in the ear tips or charging port connections.
- Avoid exposure to extreme heat, cold, and humidity.
- Do not drop or crush the earbuds. Avoid pulling the cable forcefully, applying excessive pressure, or kinking the cable.
- Earwax buildup on the ear tips can reduce sound quality. Gently clean the ear tips with a cotton swab or small tool to improve sound.
- If you experience discomfort or pain while using the earbuds, lower the volume or temporarily discontinue use.
- If discomfort persists, stop using the product and consult a medical professional.
- Handle your earbuds with care, similar to how you would handle sunglasses. Store them in a safe place when not in use.
