JLab Audio Fit Sport 3 Wireless Earbuds

Welcome & Support

We're excited for you to rock with JLab Audio! We're proud of our products and stand behind them.

Your Warranty

All warranty claims are subject to JLab Audio authorization and our sole discretion. Retain your proof of purchase to ensure your warranty is covered.

Contact Us

Email: support@jlabaudio.com

Visit: intl.jlabaudio.com/contact

Register Now

intl.jlabaudio.com/register

Get product updates, user guides, FAQs, and more.

Getting Started: Bluetooth Pairing

1. Step 1: Enable Bluetooth

   Turn on Bluetooth in your device's settings.

   Visual Description: A smartphone screen showing 'Settings' with the 'Bluetooth' toggle switched ON.

2. Step 2: Enter Pairing Mode

   Press and hold the button on the earbuds for 10 seconds. Release. The indicator light will flash red and blue, indicating pairing mode.

   Visual Description: An earbud with a button. An illustration shows pressing the button, and the indicator light changing to flashing red and blue.

3. Step 3: Connect to Device

   In your device's Bluetooth settings, select 'JLab BT' to connect. The indicator light will slowly flash blue when paired.

   Visual Description: A smartphone screen showing 'Settings' > 'Bluetooth' with 'JLab BT' selected for connection. The earbud indicator light is shown as slowly flashing blue.

Frequent Use

Once the JLab Fit Sport 3 is initially paired with your device, the earbuds will automatically connect to your Bluetooth device when powered on. (Refer to button function instructions for details).

Button Functions

Standard Controls

• Volume Up: Tap
• Next Track: Press and hold for 2 seconds
• Power On: Press and hold for 3 seconds
• Power Off: Press and hold for 5 seconds
• Play/Pause/Answer/Hang Up: Tap
• Activate Siri (iOS) or "OK Google" (ANDROID): Double tap
• Bluetooth Pairing: Refer to initial setup instructions.
• Volume Down: Tap
• Previous Track: Press and hold for 2 seconds

EQ Modes

Short press either button to cycle through different EQ settings. The Fit Sport 3 will cycle through 3 EQ settings:

• JLab Classic Mode (Single Beep): JLab C3™ signature sound, amplifies vocals and bass.
• Balanced Mode (Two Beeps): Balanced sound, no additional bass or treble enhancements.
• Bass Boost Mode: Amplifies bass and sub-bass.

Voice Prompts

• Power On: Tone
• Bluetooth Connected: Two Beeps
• Low Battery: Voice prompt "Low Battery" (when below 20%)
• Power Off: Tone

Charging

1. Connect for Charging

   Open the USB port cover. Connect the charging cable to the earbuds and then to a computer or USB power source. Ensure the charging power source is rated for 5V or less.

   Visual Description: An earbud showing the USB port cover being opened and a USB cable connected to it and a power source.

2. Charging Indicator

   The indicator light will be solid red while charging and turn blue when fully charged.

   Visual Description: An earbud showing the indicator light as solid red (charging) and then turning blue (fully charged).

Accessories

Select the appropriate ear tip size and Cush Fin™ ear stabilizers for a secure and comfortable fit. Experiment with different ear tips to find the best fit.

Visual Description: Images showing different sizes of ear tips and Cush Fin stabilizers.

Move the earbuds from the adjustable ear tip holder to the desired position for optimal comfort and fit.

Visual Description: An illustration showing how to adjust the earbud's position on the ear.

Starting from the back, wrap the earbud cable around your ear for a secure fit.

Visual Description: An illustration demonstrating wrapping the cable around the ear.

Secure the cable at the front, back, and bottom of your clothing for stability.

Visual Description: An illustration showing how to clip the cable to clothing.

Wire Clip Usage

1. Attach Clip

   Attach the wire clip near the center of the cable.

   Visual Description: An earbud cable with a wire clip attached near the center.

2. Secure to Clothing

   Clip the wire to the back or front of your shirt for cable management.

   Visual Description: An earbud cable clipped to the back or front of a shirt.

Connection Troubleshooting

Cannot See JLAB BT on My Device

1. Turn off Bluetooth, then turn it back on in your device settings.

   Visual Description: A smartphone screen showing 'Settings' > 'Bluetooth' with the toggle switched OFF and then ON again.

2. If you still do not see JLab BT, repeat the initial setup: Bluetooth Pairing procedure.

   Visual Description: A smartphone screen showing 'Settings' > 'Bluetooth' with no JLab BT device visible.

JLAB BT Not Reconnecting After Powering On

1. In your device settings, find and 'forget' or 'skip' the JLab BT device.

   Visual Description: A smartphone screen showing 'Settings' > 'Bluetooth' with 'JLab BT' listed and an option to 'Forget' or 'Skip' it.

2. Turn off Bluetooth, then turn it back on in your device settings.

   Visual Description: A smartphone screen showing 'Settings' > 'Bluetooth' with the toggle switched OFF and then ON again.

3. Repeat the initial setup: Bluetooth Pairing procedure.

   Visual Description: A smartphone screen showing 'Settings' > 'Bluetooth' with 'JLab BT' available to connect.

Bluetooth is Connecting to an Unwanted Device

Note: JLab BT can remember up to 8 devices. It will attempt to automatically connect to the last used device.

1. If you have multiple devices connected to JLab BT, turn off Bluetooth on the unwanted device and turn on Bluetooth on the desired device.

   Visual Description: A smartphone screen showing 'Settings' > 'Bluetooth' with multiple devices listed. The user is shown turning off Bluetooth for an unwanted device.

2. To re-initiate pairing, press and hold the button for 10 seconds. Release. The indicator light will flash red and blue, indicating pairing mode. Select 'JLab BT' in your device settings to connect. The indicator light will slowly flash blue when paired.

   Visual Description: An earbud with a button. An illustration shows pressing the button, and the indicator light changing to flashing red and blue. A smartphone screen shows 'Settings' > 'Bluetooth' with 'JLab BT' selected. The earbud indicator light is shown as slowly flashing blue.

Warnings

• Ensure the USB port is closed and secured. This will prevent sweat and water damage.
• The Fit Sport 3 earbuds must be completely dry before charging. If exposed to moisture, internal components may be damaged. Allow to air dry before charging.

Visual Description: An earbud with the USB port cover shown closed and secured. Another image shows earbuds placed to air dry.

Precautions

• Avoid getting moisture into the earbud ear tips or charging port.
• Avoid extreme heat, cold, and moisture.
• Avoid dropping or crushing the earbuds, pulling the cable with excessive force or speed, or bending the cable at sharp angles.
• Earwax may build up in the earbud ear tips, reducing sound quality. Gently clean earwax with a cotton swab or other small tool to improve sound quality.
• If you experience discomfort or pain, try lowering the volume or taking a break.
• If you experience persistent discomfort while using this product, discontinue use and consult your doctor.
• Treat your earbuds with care, similar to how you would treat a pair of stylish sunglasses, and store them in a safe place when not in use.