[JLab Logo]
JLab Audio Fit Sport 3 Wireless Earbuds
Thank you for choosing JLab Audio! We are proud of our products and believe in them completely.
Warranty Information
[2 Year Warranty Seal]
YOUR WARRANTY: All warranty claims are subject to JLab Audio authorization and our sole discretion. Keep your proof of purchase to ensure full warranty.
Contact Us
Contact us at support@jlabaudio.com or visit intl.jlabaudio.com/contact
[US Based Customer Support Seal]
Sign Up Today
intl.jlabaudio.com/register
Product updates | Tips FAQ and extras
FIT SPORT 3 WIRELESS EARBUDS
INITIAL SETUP: BLUETOOTH PAIRING
Step 1: Activate Bluetooth
Activate Bluetooth in your device's settings.
[Description of phone screen showing Bluetooth settings with Bluetooth toggled on.]
Step 2: Enter Pairing Mode
Press and hold the button for 10 seconds. Release the button.
The indicator light flashes red and blue to indicate pairing mode.
[Description of earbud diagram with a button. An indicator light is shown flashing red and blue.]
Step 3: Connect to Device
To pair, select 'JLab BT' in your device's Bluetooth settings.
The indicator light flashes slowly blue once the device is paired via Bluetooth.
[Description of phone screen showing Bluetooth settings, with 'JLab BT' selected and a Bluetooth connection icon.]
REGULAR USE
Once JLab Fit Sport 3 has been paired to your device for the first time, the earbuds will then automatically connect to your Bluetooth device whenever it is powered on. (Follow the BUTTON FUNCTIONS instructions)
BUTTON FUNCTIONS
- INCREASE VOLUME: Single click
- SKIP TO NEXT TRACK: Click and hold for over 2 seconds
- POWER ON: Click and hold for 3 seconds
- POWER OFF: Click and hold for 5 seconds
- PLAY / PAUSE / ANSWER / HANG UP: Single click
- REJECT INCOMING CALLS: Click and hold for 1 second
- ACTIVATE SIRI (iOS) OR 'OK GOOGLE' (ANDROID): Double click
- BLUETOOTH PAIRING: (Follow the 'Initial Setup: Bluetooth Pairing' instructions)
- DECREASE VOLUME: Single click
- RETURN TO PREVIOUS TRACK: Click and hold for over 2 seconds
[Description of earbud diagram illustrating button functions.]
EQUALIZER MODES
Quickly press both buttons to change equalizer modes (Fit Sport 3 will cycle through three equalization settings):
- JLAB SIGNATURE (One Beep): JLab C3™ sound signature with amplified vocals and bass.
- BALANCED (Two Beeps): Harmonious sound without additional amplification.
- BASS BOOSTED (Three Beeps): Amplified bass and sub-bass.
VOCAL INSTRUCTIONS
- POWER ON: Audible tone
- BLUETOOTH CONNECTED: Two beeps
- LOW BATTERY: "Low battery" (Less than 20%)
- POWER OFF: Audible tone
CHARGING
To charge, open the USB port cover and connect the cable to a computer or USB power source. Ensure the power source has a maximum voltage of 5V.
[Description of diagram showing USB port cover opening, a USB cable connecting to a computer and the earbuds. Another diagram shows a wall adapter.]
The indicator light will turn solid red, without blinking, to indicate charging is in progress and will turn blue once fully charged.
[Description of diagram showing earbuds connected for charging, with a red indicator light labeled 'Charging'. Another diagram shows earbuds with a blue indicator light labeled 'Fully Charged'.]
FITMENT
Step 1: Choose Ear Tips and Cush Fins
Choose the size of your ear tips and optional Cush Fins. Try different ear tips to find the ones that fit you best.
Step 2: Position Earbuds
Position the earbud as desired thanks to the adjustable ear tip placement.
Step 3: Loop Around Ear
Start from the back and loop it around the ear.
Step 4: Secure Cable
Secure the cable in front, behind, and below.
CABLE MANAGEMENT
Step 1: Attach Clip
Secure the cable clip approximately in the middle of the cable.
Step 2: Clip to Clothing
Clip it to the front or back of your shirt.
[Description of diagram showing the cable clip attached to the earbud cable and then clipped to a shirt collar at the front and back.]
CONNECTION TROUBLESHOOTING
JLAB BT NOT APPEARING ON MY DEVICE
Turn Bluetooth Off and On
Go to your device's settings to turn Bluetooth off, then turn Bluetooth back on.
[Description of phone screen showing Bluetooth settings with Bluetooth toggled off, then toggled on.]
Re-attempt Pairing
If JLab BT still does not appear on your device, repeat the 'INITIAL SETUP: BLUETOOTH PAIRING' instructions.
JLAB BT NOT CONNECTING TO MY DEVICE AFTER POWERING ON
Forget Device
In your device's settings, 'forget' JLab BT.
[Description of phone screen showing Bluetooth settings, with 'JLab BT' listed and an option to 'Forget Device' or similar.]
Turn Bluetooth Off and On
Go to your device's settings to turn Bluetooth off, then turn Bluetooth back on.
Re-attempt Pairing
Repeat the 'INITIAL SETUP: BLUETOOTH PAIRING' instructions.
CONNECTION TROUBLESHOOTING (CONT.)
BLUETOOTH CONNECTED TO AN UNWANTED DEVICE
Note: The JLab BT headset can memorize up to 8 devices. It will try to automatically connect to the last used device.
Manage Connected Devices
If multiple of your devices were previously connected to the JLab BT headset, turn off Bluetooth on the unwanted devices, then turn on Bluetooth on the chosen device.
[Description of phone screen showing multiple Bluetooth devices listed, with one selected.]
Re-enter Pairing Mode
Press and hold the button for 10 seconds. Release the button. The indicator light flashes red and blue to indicate pairing mode.
To pair, select 'JLab BT' in your device's Bluetooth settings. The indicator light flashes slowly blue once the device is paired via Bluetooth.
WARNINGS
Ensure the USB port cover is closed and attached. This ensures protection against moisture and water damage.
[Description of diagram showing the earbuds with the USB port cover closed and sealed.]
Before charging, Fit Sport 3 must be completely dry. Exposure to moisture can damage internal components. It is recommended to let it air dry before charging.
[Description of diagram showing earbuds with water droplets, indicating they need to dry.]
CAUTIONS
- Avoid any moisture or liquid inside the ear tips or charging port.
- Avoid exposing the product to extreme heat, cold, or humidity.
- Avoid dropping the earbuds or stepping on them, damaging the cable by pulling it out quickly or exerting excessive force, or bending the cable at a sharp angle.
- Earwax may accumulate in the ear tips, deteriorating audio quality. Carefully remove earwax with a cotton swab or other small object to improve audio quality.
- If you experience discomfort or pain, try lowering the volume or temporarily stop using the device.
- If you experience recurrent discomfort when using this product, stop using it and consult a doctor.
- We recommend taking care of your earbuds as you would a nice pair of sunglasses, and storing them in a safe place when not in use.
