MiBoxer PUSH3 1-Gang Wireless Dimming Panel (2.4GHz)
Model No.: PUSH3
Features
- CR2032 battery powered
- No wiring, easy to realize wireless dimming of PUSH switch
- Compatible with MiBoxer / Mi-Light 2.4G series lamps
- Adopt 2.4G RF wireless transmission technology, control distance 30m
- Control unlimited number of lamps
- Dimming range 0.1%-100%
Product Parameters
| Parameter | Value | Parameter | Value |
|---|---|---|---|
| Name | 1 GANG PUSH Wireless Dimming Panel (2.4GHz) | IP Rating | IP20 |
| Model No. | PUSH3 | EMC Standard (EMC) | ETSI EN 301 489-1 V2.2.3 ETSI EN 301 489-3 V2.1.1 |
| Input Voltage | 3V (CR2032*1PCS) | Safety Standard (LVD) | EN 61347-1:2015+A1:2018 EN 61347-2-11:2001+A1:2019 |
| Transmitting Power | 6dBm | Radio Equipment (RED) | ETSI EN 300 440 V2.2.1 |
| RF | 2.4GHz | Certification | CE, EMC, LVD, RED |
| Control Distance | 30m | ||
| Working Temperature | -10~40°C | ||
| Standby Power Consumption | <6μΑ |
Product Image: A white, square 1-gang push-button wireless dimming panel.
Dimensions: The panel measures 86mm in width and height, with a depth of 14.5mm.
Dimming Control
- Short press to turn on/off the light, long press to adjust the light brightness.
- Control unlimited number of lamps
Installation
Battery Installation
- Remove up cover
- Install CR2032 battery (Requires separate purchase)
- Close the battery cover
Sticking Installation
- Tear out the back tape
- Stick it on the wall
Screwing Installation
- Remove up cover
- Screwing and cover it
Linking Code Instructions
Step 1: Power [power-symbol] → Light. Process: Turn off light 10 seconds and turn on again.
Step 2: Process: Short press "PUSH" button 6 times within 3 seconds.
Step 3: Result: Link is done once light flashes 3 times slowly.
⚠️ Link is failed if light doesn't flash, please repeat above steps. (Attention: cannot link again if dimming panel already finished linking)
Unlinking Code Instructions
Step 1: Power [power-symbol] → Light. Process: Turn off light 10 seconds and turn on again.
Step 2: Process: Short press "Unlink" button 5 times within 3 seconds.
Step 3: Result: Link is done once light flashes 10 times quickly.
⚠️ Unlink is failed if light doesn't flash, please repeat above steps. (Attention: no need to unlink if the dimming panel never been linked)
Attention
- Please do not use it in a humid or high temperature environment for a long time. When not in use for a long time, please remove the battery and store it in a dry, static-free environment.
- Do not use it in an environment with a large area of metal or near strong electromagnetic waves, otherwise the control distance will be seriously affected.
