MiBoxer CL1R Wardrobe / Cabinet Light Dimmer (2.4GHz)
Model No.: CL1R
Features
- 0.1%-100% stepless dimming.
- Supports power-off memory.
- 2.4G RF remote control distance 30m.
- Suitable for wardrobe/cabinet lights.
Parameters and Certification
| Name | Wardrobe / Cabinet Light Dimmer | IP Rate | IP20 |
| Model No. | CL1R | EMC standard | ETSI EN 301 489-1 V2.2.3, ETSI EN 301 489-3 V2.3.2 |
| Input Voltage | DC12-24V | Security standard | EN 61347-2-11:2001+A1:2019, EN 61347-1:2015+A1:2021, EN 62493:2015+A1:2022 |
| Output | PWM Signal | Radio equipment | ETSI EN 300 400 V2.2.1 |
| RF | 2.4GHz | Certification | CE, EMC, LVD, RED |
| Control Distance | 30M | ||
| Working temperature | -10~40℃ |
Dimensions:
- Length: 65mm
- Width: 40mm
- Height: 16.5mm
- Cable Length: 6.5mm
Application Diagram
This dimmer can be controlled via APP (4G/5G WiFi), Alexa/Google voice control, Router, or Gateway. It connects to a Wardrobe/Cabinet Light Power Supply and then to the Lighting. A remote or PIR sensor can also be used.
Link Instructions
- Connect the cabinet light power.
- Press the "LINK" button once.
- Press the "I" button 3 times within 3 seconds. The indicator will blink 3 times slowly, indicating successful linking.
⚠️ Link is failed if the light doesn't flash. Please repeat the above steps. Attention: cannot link again if the remote already finished linking.
Unlink Instructions
- Connect the cabinet light power.
- Press the "LINK" button once.
- Press the "I" button 5 times within 3 seconds. The indicator will blink 10 times quickly, indicating successful unlinking.
⚠️ Unlink is failed if the light doesn't flash. Please repeat the above steps. Attention: no need to unlink if the remote was never linked.
