1 GANG PUSH Wireless Dimming Panel (2.4GHz)
Model No.: PUSH3
Features
- CR2032 battery powered
- No wiring, easy to realize wireless dimming of PUSH switch
- Compatible with MiBoxer / Mi-Light 2.4G series lamps
- Adopt 2.4G RF wireless transmission technology, control distance 30m
- Control unlimited number of lamps
- Dimming range 0.1%-100%
Description: A white, square-shaped panel with rounded corners. Dimensions are 86mm x 86mm with a thickness of 14.5mm.
Product Parameters
| Parameter | Value |
|---|---|
| Name | 1 GANG PUSH Wireless Dimming Panel (2.4GHz) |
| Model No. | PUSH3 |
| IP Rating | IP20 |
| Input Voltage | 3V (CR2032*1PCS) |
| EMC Standard (EMC) | ETSI EN 301 489-1 V2.2.3, ETSI EN 301 489-3 V2.1.1 |
| Transmitting Power | 6dBm |
| Safety Standard (LVD) | EN 61347-1: 2015+A1:2018, EN 61347-2-11:2001+A1:2019 |
| RF | 2.4GHz |
| Radio Equipment (RED) | ETSI EN 300 440 V2.2.1 |
| Control Distance | 30m |
| Certification | CE, EMC, LVD, RED |
| Working Temperature | -10~40°C |
| Standby Power Consumption | <6μΑ |
Dimming Control
- Short press to turn on/off the light, long press to adjust the light brightness.
- Control unlimited number of lamps
Installation
Battery Installation
- Remove the top cover.
- Install CR2032 battery (Requires separate purchase).
- Close the battery cover.
Sticking Installation
- Tear out the back tape.
- Stick it on the wall.
Screwing Installation
- Remove the top cover.
- Screw and cover it.
Linking Code Instructions
- Turn off the light for 10 seconds, then turn it on again.
- Short press the “PUSH” button 6 times within 3 seconds.
- Linking is successful when the light flashes 3 times slowly.
⚠️ Link is failed if the light doesn't flash; please repeat the above steps. (Note: Linking cannot be performed again if the dimming panel has already completed linking).
Unlinking Code Instructions
- Turn off the light for 10 seconds, then turn it on again.
- Short press the "Unlink" button 5 times within 3 seconds.
- Unlinking is successful when the light flashes 10 times quickly.
⚠️ Unlinking is failed if the light doesn't flash; please repeat the above steps. (Note: No need to unlink if the dimming panel has never been linked).
Attention
- Please avoid prolonged use in humid or high-temperature environments. When not in use for an extended period, remove the battery and store it in a dry, static-free environment.
- Do not use in environments with large areas of metal or near strong electromagnetic waves, as this may seriously affect the control distance.
