MiBoxer PUSH3 2.4GHz Wireless Dimming Panel
Model: PUSH3
Product Features
- Powered by CR2032 battery
- No wiring required, easily achieve wireless dimming with PUSH switch
- Compatible with MiBoxer / Mi-Light 2.4G series luminaires
- Uses 2.4G RF wireless transmission technology, control distance up to 30 meters
- Unlimited number of controlled luminaires
- Dimming range 0.1%-100%
Product Parameters
| Product Name | 1-Gang PUSH Wireless Dimming Panel (2.4GHz) |
| Model | PUSH3 |
| Input Voltage | 3V (CR2032 * 1PCS) |
| Transmit Power | 6dBm |
| RF | 2.4GHz |
| Control Distance | 30m |
| Working Temperature | -10~40°C |
| Standby Power Consumption | <6μA |
| Waterproof Rating | IP20 |
| EMC Standard (EMC) | ETSI EN 301 489-1 V2.2.3 ETSI EN 301 489-3 V2.1.1 |
| Safety Standard (LVD) | EN 61347-1:2015+A1:2018 EN 61347-2-11:2001+A1:2019 |
| Radio Equipment (RED) | ETSI EN 300 440 V2.2.1 |
| Certification | CE, EMC, LVD, RED |
Product Dimensions: 86mm x 86mm, Thickness: 14.5mm.
Dimming Control
- Short press to turn on/off, long press to adjust brightness.
- Unlimited number of luminaires can be controlled.
Installation Instructions
Battery Installation
Steps:
- Remove the top cover.
- Install a CR2032 battery (sold separately).
- Reattach the top cover.
Adhesive Mounting
Steps:
- Peel off the backing of the double-sided tape.
- Position and stick to a flat wall surface.
Screw Mounting
Steps:
- Remove the top cover.
- Tighten screws and reattach the top cover.
Pairing Instructions
Follow these steps to pair the PUSH3 panel with your lights:
- Power off the lights, then power them on again after 10 seconds.
- Within 3 seconds, short press the "PUSH" button 6 times.
- The lights will flash slowly 3 times, indicating successful pairing.
⚠️ If the lights do not flash slowly, pairing has failed. Please re-execute the above steps. (Note: Luminaires that have already been paired cannot be paired again).
Unpairing Instructions
Follow these steps to unpair the PUSH3 panel from your lights:
- Power off the lights, then power them on again after 10 seconds.
- Within 3 seconds, short press the "Unlink" button 5 times.
- The lights will flash quickly 10 times, indicating successful unpairing.
⚠️ If the lights do not flash quickly, unpairing has failed. Please re-execute the above steps. (Note: Luminaires that are not paired do not need to be unpaired).
Precautions
- Do not use in humid or high-temperature environments for extended periods. When not in use for a long time, please remove the battery and store it in a dry, static-free environment.
- Do not use in environments with large areas of metal or strong electromagnetic waves nearby, as this will seriously affect the control distance.
Certifications
[CE Certified], [UKCA Certified], [FCC Certified], [RoHS Compliant]. Made in China.
