Mastech MS8902B Non-Contact AC Voltage Detector
SKU Number: MS8902BCBGLO
Safety Precautions
[Warning] Special attention should be paid when using this test and measurement instrument. Improper usage may cause electric shock and damage the equipment.
- Use proper measurement category (CAT), voltage, and amperage rated probes, test leads, and adapters for the measurement.
- Do not use or store the device around explosive gas, vapor, or under high temperature and humidity.
- When handling the test probes and crocodile clips, keep your fingers behind the physical guard.
- Examine the measuring test leads (if present) before use. Replace any component with deteriorated insulation with proper functional test leads.
- Connect the common test lead before the live test lead and remove the live test lead before the common test lead.
- Before measuring current, ensure the instrument has available fuses and disconnect the power supply to the circuit being tested.
- Remove batteries if the device is not used for an extended period or stored above 45°C to prevent battery leakage damage.
Specifications
| Parameter | Range |
|---|---|
| AC Voltage (V~) | 20V ~ 1000V |
| Frequency (Hz) | 50Hz ~ 500Hz |
Measurement Categories: CAT II 1000V, CAT III 600V
Quick Start Guide
How to Use
- Power On: The device is powered on by pressing the power button.
- Setting Sensitivity: Adjust the sensitivity by pressing the sensitivity button. The device may indicate sensitivity levels or modes.
- Detection: Bring the tip of the detector near a suspected AC voltage source (e.g., an electrical outlet or a wire).
- Indication: The detector will indicate the presence of AC voltage through a visual indicator (e.g., a light or [Flash]) and/or an audible indicator (e.g., a [Beep] sound).
Warranty
1 Year Limited Warranty
