Safety Precautions
[Warning Symbol] The special attention should be paid when using the test and measurement instrument because the improper usage may cause electric shock and damage the equipment.
- Use proper measurement category (CAT), voltage, and amperage rated probes, test leads, and adapters for the measurement.
- Do not use or store the device around explosive gas, vapor, or under high temperature and humidity.
- When handling the test probes and crocodile clips, keep your fingers behind the physical guard.
- Examine the measuring test leads (if present) before use. Any element of which the insulation is deteriorated (even partially), replace them with proper functional test leads.
- Connect the common test lead before the live test lead and remove the live test lead before the common test lead.
- Before measuring current, make sure the instrument fuses available and disconnect the power supply to the circuit test.
- Remove the batteries if the device is not used for an extended period of time, or if stored in temperatures above 45 °C. If the batteries are not removed, battery leakage can damage the device.
Specifications
| Feature | Value |
|---|---|
| Non-Contact AC Voltage Detector (AC Voltage Range) | 90~1000V |
| Frequency | 50Hz~60Hz |
Ratings: CAT II 1000V, CAT III 600V
Warranty: 1 YEAR LIMITED WARRANTY
Specifications are subject to change without notification.
Getting Started
Battery Installation
Diagram showing the detector body and a cap being separated, indicating battery installation. To install batteries, remove the cap from the end of the detector. Insert batteries as indicated.
Detecting AC Voltage
Diagram showing the detector tip inserted into a wall socket, and another showing the tip near a wire. An indicator light and sound waves are shown next to the detector, signifying voltage detection. To detect AC voltage, insert the tip of the detector into an electrical socket or bring it near a live wire. The detector will indicate the presence of voltage with a light and/or sound.
Company Information
EMEA: MGL EUMAN S.L., C/ Picu Castiellu, Parcelas i1-i4 33163, Argame Morcín, Asturias, Spain. Tel: +34 985-08-18-70. Email: cs.emea@mgl-intl.com
USA: MGL AMERICA, INC., 2810 Coliseum Centre Drive, Ste. 100 Charlotte, North Carolina 28217 USA. Tel: +1 833-533-5899. Email: cs.na@mgl-intl.com
United Kingdom: MGL GROUP U.K. LIMITED, 14 Weller St, London, SE1 1QU, UK. Tel: +34 985-08-18-70. Email: cs.uk@mgl-intl.com
Mexico & LATAM: MGL LATAM S.A DE CV, Colonia Industrial Vallejo Del. Azcapotzalco 02300, Mexico D.F. Tel: +1 833-533-5899. Email: cs.latam@mgl-intl.com
APAC: MGL APPA Corporation, Flat 4-1, 4/F, No. 35, Section 3 Minquan East Road, Taipei, Taiwan. Tel: +886 2-2508-0877. Email: cs.apac@mgl-intl.com
[CE Certified] [EAC Certified]
