Yaheetech 591680 Instruction Manual
Model: 591680
Welcome and Important Information
Thank you for choosing Yaheetech. This manual provides comprehensive instructions for the safe assembly and use of your product. Please read all instructions carefully before beginning assembly.
Important: Keep this manual for future reference. Ensure all parts are present before assembly. If any parts are missing or damaged, please contact Yaheetech customer support.
Safety Precautions
Warning: To prevent potential injury, please follow these safety guidelines:
- Assemble on a soft, clean surface (e.g., carpet or the product's packaging) to avoid scratching.
- Keep small parts and plastic bags away from children during assembly.
- Do not overtighten screws, as this may damage the product.
- Ensure the product is stable before use.
- ⚠️ Do not stand on the product.
- ⚖️ Adhere to specified weight limits for shelves or seating surfaces.
- ?️ Use only the tools specified in this manual.
Parts List
Identify all parts before assembly. Refer to the diagrams below for visual identification.
| Part ID | Description | Quantity | Diagram/Image |
|---|---|---|---|
| A | Left Side Panel | 1 | [Detailed textual description of Diagram A: e.g., A rectangular wooden panel with pre-drilled holes along one long edge and one short edge.] |
| B | Right Side Panel | 1 | [Detailed textual description of Diagram B: e.g., A rectangular wooden panel, mirror image of Part A, with pre-drilled holes.] |
| C | Top Panel | 1 | [Detailed textual description of Diagram C: e.g., A flat rectangular panel with finished edges and pre-drilled holes on the underside.] |
| F | Bottom Panel | 1 | [Detailed textual description of Diagram F: e.g., Similar to Part C but intended for the base.] |
| D | Shelf | 2 | [Detailed textual description of Diagram D: e.g., Rectangular wooden shelves with smooth surfaces and no visible holes.] |
| E | Back Panel | 1 | [Detailed textual description of Diagram E: e.g., A thin, large rectangular panel, possibly foldable, with a wood grain finish on one side.] |
| HW1 | Cam Lock Screws | 16 | [Detailed textual description of Diagram HW1: e.g., Metal screws with a wide, flat head and a threaded shaft.] |
| HW2 | Cam Locks | 16 | [Detailed textual description of Diagram HW2: e.g., Small cylindrical metal pieces with an arrow indicator and a slot for a screwdriver.] |
| HW3 | Wooden Dowels | 8 | [Detailed textual description of Diagram HW3: e.g., Small cylindrical wooden pegs.] |
| HW4 | Shelf Pins | 8 | [Detailed textual description of Diagram HW4: e.g., Small L-shaped metal pins.] |
| HW5 | Back Panel Nails | 20 | [Detailed textual description of Diagram HW5: e.g., Small, thin metal nails.] |
Tools Required (Not Included)
- Phillips Head Screwdriver ?
- Hammer ?
- [Optional: Measuring Tape]
Assembly Instructions
Step 1: Prepare Side Panels
Attach cam lock screws (HW1) into the pre-drilled holes on the inner faces of the side panels (A and B). Insert wooden dowels (HW3) into the corresponding holes.
[Detailed textual description of Diagram Step 1: e.g., Shows panels A and B lying flat. Arrows indicate screwing HW1 into specific holes and inserting HW3 into others. The cam lock screws have their heads protruding slightly.]
Step 2: Attach Bottom Panel
Connect the bottom panel (F) to side panels A and B. Align the cam lock screws on A and B with the holes on the edges of panel F. Insert cam locks (HW2) into the larger holes on the underside of panel F and turn them clockwise to secure the connection.
[Detailed textual description of Diagram Step 2: e.g., Shows panels A and B standing upright. Panel F is being attached between them at the bottom. Arrows show inserting HW2 into Panel F and turning them to lock onto HW1 from panels A and B.]
Step 3: Attach Top Panel
Repeat the process from Step 2 to attach the top panel (C) to the top of side panels A and B using cam lock screws (HW1), cam locks (HW2), and wooden dowels (HW3).
[Detailed textual description of Diagram Step 3: e.g., Shows the partially assembled frame. Panel C is being placed on top of panels A and B. Arrows indicate securing with HW2.]
Step 4: Insert Shelves
Insert shelf pins (HW4) into the desired height holes on the inner faces of side panels A and B. Place the shelves (D) onto the shelf pins.
[Detailed textual description of Diagram Step 4: e.g., Shows the main frame assembled. Arrows indicate inserting HW4 into holes on the inside of panels A and B. Shelves D are then shown being placed on these pins.]
Step 5: Attach Back Panel
Carefully align the back panel (E) with the rear edges of the assembled frame. Ensure the unit is square. Secure the back panel using the provided nails (HW5), hammering them gently into the edges of the side, top, and bottom panels.
[Detailed textual description of Diagram Step 5: e.g., Shows the assembled unit from the back. Panel E is positioned over the opening. Arrows indicate hammering HW5 along the perimeter into panels A, B, C, and F.]
Step 6: Final Check
Ensure all connections are secure and the unit is stable. Gently test the product's stability before placing any items on it.
[Detailed textual description of Diagram Step 6: e.g., A final view of the assembled product, possibly with a checkmark icon.]
Care and Maintenance
To keep your Yaheetech product looking its best:
- Wipe clean with a soft, damp cloth.
- Avoid using harsh chemicals or abrasive cleaners.
- Check and tighten any screws periodically.
- Protect from direct sunlight and moisture.
Troubleshooting
Problem: Unit is wobbly.
Solution: Ensure all screws and cam locks are fully tightened. Check if the unit is on an uneven surface. Adjust leveling feet if applicable.
Problem: Parts do not align.
Solution: Double-check that you are using the correct parts for the current step and that they are oriented correctly. Loosen screws slightly, align parts, then retighten.
