Yaheetech 592438 Accent Chair Assembly Manual
Product Image
A line drawing of an accent chair with a wooden frame and upholstered seat and backrest. The chair has a classic design with armrests.
Important Information
Installation Requirements
Recommended: 1 or more people to install. ⏱️ Estimated assembly time: 1 hour.
Safety Warnings
?? Not intended for use by children.
? Keep away from fire or other heat sources.
? We recommend wearing protective gloves during assembly.
Assembly Preparation
Please follow the instruction manuals and use a pad to avoid damage during assembly. [Diagram shows a box being opened, a trash can with a red 'X' over it, and a chair frame being assembled on a protective mat with a checkmark. This illustrates using a protective mat and avoiding placing parts in a trash can.]
Parts List
- ① Seat Base (x1): A rectangular upholstered seat.
- ② Backrest Frame (x1): The wooden frame for the backrest.
- ③ Left Armrest Frame (x1): The wooden frame for the left armrest.
- ④ Right Armrest Frame (x1): The wooden frame for the right armrest.
- L Left Side Panel (x1): A wooden panel.
- R Right Side Panel (x1): A wooden panel.
- A Screws (x13): Long bolts with hexagonal heads.
- B Washers (x11): Flat metal rings.
- C Nuts (x11): Small hexagonal fasteners.
- D Allen Key (x1): An L-shaped tool for tightening screws.
- E Adjustable Feet (x2): Small threaded feet for leveling the chair.
Assembly Steps
Step 1
Attach the backrest frame (②) to the seat base (①) using screws (A) and washers (B). Half-tighten all screws. [Diagram shows the backrest frame being connected to the seat base with screws and washers.]
Step 2
Attach the left armrest frame (③) to the seat base (①) and backrest frame (②) using screws (A), washers (B), and nuts (C). Half-tighten all screws. [Diagram shows the left armrest frame being attached to the main assembly.]
Step 3
Attach the right armrest frame (④) to the seat base (①) and backrest frame (②) using screws (A) and adjustable feet (E). Half-tighten all screws. [Diagram shows the right armrest frame being attached to the main assembly, including the adjustable feet.]
Step 4
Attach the left side panel (L) to the frame using screws (A), washers (B), and nuts (C). Half-tighten all screws. [Diagram shows the left side panel being attached to the chair structure.]
Step 5
Attach the right side panel (R) to the frame using screws (A) and adjustable feet (E). Half-tighten all screws. [Diagram shows the right side panel being attached to the chair structure, including the adjustable feet.]
Step 6
Turn the chair upright. [Diagram shows the chair being carefully flipped over from its side to its upright position.]
Step 7
Screw in the adjustable feet (E) to keep the chair balanced. Adjust until the chair is stable. [Diagram shows a close-up of the bottom of a chair leg with an adjustable foot being screwed in and turned to level the chair.]
Final Tightening
Note: Tighten all screws completely after assembly. [Diagram shows a hand using an Allen key to fully tighten screws on the assembled chair.]
Maintenance
Velvet Care
Vacuum your piece monthly to keep the velvet looking like new. Use a nylon brush to remove any dirt or food. Contact a professional annually for a deep clean. [Icon of a vacuum cleaner.]
Stubborn Stains
Blot stains with a damp cloth and a dash of dish soap. Wipe away excess water with a clean towel. Let the material air-dry fully before use. [Icon of a cloth with a drop of soap.]
Additional Tips
Cleaning
Vacuum to remove any loose crumbs or dirt. If you have a pet, use a lint roller to gather up any fur. [Icon of a lint roller.]
Preventative Care
Rotate pillows and cushions monthly to ensure even wear. Avoid placing your piece in direct sunlight to prevent fading. Consider adding a slipcover; most are machine-washable and can change up your style!
Customer Support
If you are not entirely satisfied with your purchase, please feel free to contact us by following these steps: 1. Go to Your Orders. 2. Find your order in the list. 3. Select "Problem with order". 4. Choose your topic from the displayed list. 5. Select "Contact seller".
Manufactured in PRC. Importer: Yahee GmbH, Höpfigheimer Straße 11.7, 4321 Bietigheim-Bissingen.
You can also download the electronic Installation Manual from the product guides and documents section of the advertising page.