Yaheetech 592611 Bed Frame Assembly Instructions
Please read this instruction manual carefully before attempting to install.
Important Information
- We recommend 2 or more people to install.
- The expected assembly time is 1 hour.
- Not intended for use by children.
- Keep away from fire or other heat sources.
- We recommend wearing protective gloves.
Assembly Precautions
Please follow the instruction manuals and use a pad to avoid damage during assembly.
Diagram 1: Shows a person opening a carton, then discarding packaging material into a bin, and finally holding a frame piece with a red cross indicating an incorrect action.
Diagram 2: Shows a person opening a carton, placing a protective pad on the floor, and then holding a frame piece with a green checkmark indicating a correct action.
Parts List
The product is shipped in multiple packages. Please confirm receipt of all boxes before initiating assembly.
Box 1/2 Parts:
- Part 5 (x2)
- Part 6 (x4)
- Part 7 (x2)
- Part 8 (x2)
- Part 9 (x1)
- Part 10 (x1)
Box 2/2 Parts:
- Part 1 (x2)
- Part 2 (x1)
- Part 3 (x1)
- Part 4 (x2)
- Screw A (x28)
- Screw B (x16) - M6x40mm
- Washer C (x8)
- Washer D (x4)
- Nut E (x4)
- Screw F (x4) - M6x35mm
- Allen Key G (x2)
- Wrench H (x1)
Assembly Steps
Step 1: Half-tighten all screws into the holes. After all screws are set, fully tighten them.
Step 2: Pay attention to the direction of Part (1) & (5) when installing. Half-tighten screws, then fully tighten.
Step 3: Pay attention to the direction of Part (6) when installing. Half-tighten screws, then fully tighten.
Step 4: Use screws (7), (8), and washers (C), (D), and nuts (E), (F) to assemble. Half-tighten screws, then fully tighten.
Step 5: Use screws (9) and (A) to assemble. Half-tighten screws, then fully tighten.
Step 6: Use screws (B) to assemble. Half-tighten screws, then fully tighten.
Step 7: Attach Part (10) as shown in Diagram No.1 and No.2.
Step 8: Screw in the adjustable feet to keep the frame balanced.
Maintenance
Velvet Care:
- Vacuum your piece monthly to keep the velvet looking like new.
- Use a nylon brush to remove any dirt or food.
- Contact a professional annually for a deep clean.
Stubborn Stains:
- Blot stains with a damp cloth and a dash of dish soap.
- Wipe away excess water with a clean towel.
- Let the material air-dry fully before use.
Additional Tips:
- Vacuum to remove any loose crumbs or dirt.
- If you have a pet, use a lint roller to gather up any fur.
Preventative Care:
- Rotate pillows and cushions monthly to ensure even wear.
- Avoid placing your piece in direct sunlight to prevent fading.
- Add a slipcover. Most are machine-washable and can change up your style!
Customer Support
If you are not entirely satisfied with your purchase, please feel free to contact Yaheetech using the following steps:
- Go to Your Orders.
- Find your order in the list.
- Select "Problem with order".
- Choose your topic from the list displayed.
- Select "Contact seller".
You can also download the electronic Installation Manual from the "Product guides and documents" section of the advertising page.
