IKEA PLATSA Assembly Instructions
Brand: IKEA
Important Safety Information
WARNING! Serious or fatal crushing injuries can occur from furniture tip-over. To prevent tip-over, this furniture must be used with the wall attachment device(s) provided.
Screw(s) and plug(s) for the wall are not included. Use screw(s) and plug(s) suitable for your walls. If you are uncertain, seek professional advice. Read and follow each step of the instruction carefully.
The following languages are also provided for safety warnings: Deutsch, Français, Nederlands, Dansk, Íslenska, Norsk, Suomi, Svenska, Česky, Español, Italiano, Magyar, Polski, Eesti, Latviešu, Lietuvių, Portugues, Româna, Slovensky, Български, Hrvatski, Ελληνικά, Русский, Українська, 中文, 한국어, Bahasa Malaysia, عربي, 日本語, Bahasa Indonesia, ไทย, Tiếng Việt.
Assembly Steps
Step 1: Prepare Components
Gather all components and tools. Ensure you have the necessary parts as shown in the diagram: 8x screws (114142), 4x dowels (100092), 2x caps (194732), 1x Allen key (10044727), 4x washers (10100556), 4x brackets (10042534), 4x brackets (10042566).
Visual description: Shows a person holding a screwdriver, a spirit level, and tape. The main assembly frame parts are laid out.
Parts used: Screwdriver, spirit level, tape.
Step 2: Assemble Frame Sides
Connect the side panels to the base and top frame elements. Use the provided screws and Allen key. Ensure parts are correctly oriented.
Visual description: Two people are shown assembling wooden panels. One diagram shows correct assembly, the other shows incorrect assembly with a cross symbol.
Action: Connect frame parts.
Step 3: Attach Back Panel
Slide or attach the back panel into the designated grooves or slots on the frame. Secure it with screws.
Visual description: Shows a person sitting on the partially assembled frame, placing the back panel. Another diagram shows the frame with the back panel attached, with a cross symbol indicating an incorrect method.
Action: Insert back panel.
Step 4: Add Shelves
Insert the shelves into the frame. They should rest on pre-drilled holes or supports.
Visual description: Shows a person inserting a shelf into the frame. The shelf is shown being placed correctly.
Action: Place shelves.
Step 5: Secure Top Panel
Attach the top panel to the assembled frame using the provided screws.
Visual description: Shows the top panel being attached to the frame with screws. A close-up shows the screw being inserted and tightened.
Action: Attach top panel.
Step 6: Wall Mounting Preparation
Identify the wall mounting brackets and screws. Ensure the unit is positioned correctly against the wall before securing.
Visual description: Shows the assembled unit being positioned against a wall. Diagrams illustrate the use of wall brackets and screws.
Action: Position unit and prepare for wall mounting.
Step 7: Secure Unit to Wall
Use the provided wall attachment devices (brackets) and appropriate screws/plugs (not included) to firmly secure the unit to the wall. Follow the instructions carefully.
Visual description: Shows the wall bracket being attached to the unit and then to the wall. A close-up shows the 'click' mechanism for securing the bracket.
Action: Attach wall brackets and secure to wall.
Step 8: Final Check and Configuration
Ensure all parts are securely fastened. The PLATSA system can be configured in various ways, including stacking units vertically up to a maximum height of 300 cm (118 7/64").
Visual description: Shows the completed unit. Another diagram shows multiple units stacked vertically, indicating a maximum height limit.
Action: Finalize assembly and check stability.
Step 9: Adding Accessories (Optional)
Additional shelves or accessories can be added as needed. Follow specific instructions for any additional components.
Visual description: Shows a diagram with multiple shelves being inserted into the unit, and another diagram showing a unit being placed next to another.
Action: Add shelves or accessories.
Step 10: Wall Anchoring Detail
Detailed view of how the wall anchoring bracket attaches to the unit and the wall. This step is critical for safety.
Visual description: Close-up views of the wall anchoring mechanism, showing screws and brackets being used to secure the unit to the wall.
Action: Ensure secure wall anchoring.
Step 11: Stacking Units
Instructions for stacking multiple PLATSA units to create a taller storage solution. Ensure stability and proper connection between units.
Visual description: Shows how to connect one PLATSA unit on top of another, with arrows indicating the connection points.
Action: Stack units securely.
Step 12: Final Unit Configuration Example
An example of a completed, multi-unit PLATSA configuration, demonstrating its modularity and potential height.
Visual description: Shows a tall, multi-unit PLATSA storage system assembled against a wall.
Action: Final configuration example.
