PLATSA

Safety Warning ⚠️

Serious or fatal crushing injuries can occur from furniture tip over. To prevent tip over, this furniture must be used with the wall attachment device(s) provided.

Screw(s) and plug(s) for the wall are not included. Use screw(s) and plug(s) suitable for your walls. If you are uncertain, seek professional advice. Read and follow each step of the instruction carefully.

Tools and Assistance

Assembly may require the following tools:

• Screwdriver ?
• Spirit Level ?

Assembly is recommended to be done by two people. ?‍?‍?

If you are unsure about any part of the assembly, please refer to the instructions or contact IKEA for assistance. ? ? IKEA

Parts Included

The following parts and hardware are included in the package:

Assembly Steps

Step 1: Frame Assembly

Connect the main frame components. Attach the side panels to the base and top frame pieces using 8x screws (114142) and the Allen key (100092). Ensure the panels with the patterned mesh are oriented correctly.

Visual Description: The diagram shows two side panels being attached to a rectangular frame, with screws being inserted and tightened with an Allen key.

Step 2: Attaching Back Panels

Secure the back panels (featuring a patterned mesh) to the assembled frame. Use 8x screws (194732) for this step.

Visual Description: The diagram shows the back panels being attached to the frame, with screws being inserted into pre-drilled holes.

Step 3: Connecting Frame Sections

Join the assembled frame sections together to form the main structure of the unit.

Visual Description: The diagram shows two halves of the frame being brought together and aligned.

Step 4: Securing the Frame

Further secure the main frame by inserting and tightening 4x screws (114142) using the Allen key (100092).

Visual Description: The diagram shows screws being inserted into specific points on the frame and tightened with an Allen key.

Step 5: Attaching Remaining Frame Components

Attach the remaining frame components or side panels. Use 4x screws (194732) to secure these parts.

Visual Description: The diagram shows additional frame pieces being attached to the main structure with screws.

Step 6: Installing Shelf Supports (Part 1)

Insert and secure the first set of shelf support connectors. Attach 2x parts (10044727) using 2x screws (10044713). Ensure they click into place. ? Click!

Visual Description: The diagram shows small circular connectors being inserted into holes on the frame and then secured with screws. A close-up shows the "click" mechanism.

Step 7: Installing Shelf Supports (Part 2)

Install the remaining shelf support connectors. Use 20x parts (10042566) and 20x parts (10042534). Ensure they click into place. ? Click!

Visual Description: The diagram shows various types of connectors being inserted into multiple holes along the frame and secured. A close-up shows the "click" mechanism.

Step 8: Inserting Shelves

Carefully slide the shelves into the unit, resting them on the installed shelf supports.

Visual Description: The diagram shows shelves being lowered into the unit and positioned on the supports.

Step 9: Attaching Wall Brackets

Attach the wall mounting brackets (10046332) to the top rear of the unit. Use 2x of these brackets.

Visual Description: The diagram shows wall brackets being attached to the top of the unit, ready for wall mounting.

Step 10: Final Unit Assembly

Complete the assembly of the main storage unit structure.

Visual Description: The diagram shows the fully assembled unit standing.

Step 11: Wall Attachment Preparation

IMPORTANT: This furniture must be secured to the wall using the provided wall attachment device(s) to prevent tipping. Follow the instructions for attaching the wall brackets.

Visual Description: An information icon is shown next to a diagram illustrating how the wall brackets attach to the unit. It also shows screws and wall plugs, emphasizing that these are not included and must be suitable for your wall type.

Step 12: Positioning the Unit

Carefully move the assembled unit to its final desired location against the wall.

Visual Description: The diagram shows the unit being moved into position against a wall.

Step 13 & 14: Securing to the Wall

CRITICAL STEP: Secure the unit to the wall using the attached wall brackets and appropriate wall fixings (not included). Ensure the unit is stable and safely anchored.

Visual Description: Diagrams show the unit against the wall, with the wall brackets being aligned and secured to the wall. This step is crucial for safety.

Final Check

Ensure all screws are tightened and the unit is securely attached to the wall. ✔️