FALCON RIDGE

Be sure to read these instructions thoroughly before opening and installing the Honda Talon 4 Polycarbonate Door Panel Inserts.

1. Check over the parts included in the cartons with the parts list shown below:

If any parts are damaged or missing please contact customer service at (606) 845-7439.

Tools Needed for Installation:

1. Phillips Screwdriver
2. 1/4" Drill bit and Drill

Installation Steps:

1. Begin the installation by removing the outer door skins of the Talon 4. You will see 8 Phillips head screws on the inside of the door around the edges. Remove these making sure to put them someplace they won't get lost. See Photo Below.

   [Image Description: The inside of the Honda Talon 4 door is shown, with arrows pointing to 8 Phillips head screws located around the door's edges that need to be removed.]

2. Now take the door panels and the aluminum angles and bolt them together using the 3/4" bolts, washers and lock nuts.
3. For the front panels use the long angles. You will notice that the holes on the different sides are not drilled in the same locations and the two angles are mirror images, one for the left side and one for the right side.
4. The holes that are centered are the ones used to bolt the angle to the panels. When bolting them on the holes in the other side should be offset towards the small end of the panel as shown in the photo below.

   [Image Description: A close-up view shows a door panel being attached to an angled bracket. The centered holes on the bracket are used for attachment to the panel. The offset holes on the other side of the bracket are positioned towards the smaller end of the panel.]

5. The rear door panels use the short angles and attach to the panels using the side with three holes, with the holes of the other side of the angle towards the larger end of the panels as shown in the photo below.

   [Image Description: A close-up view shows a rear door panel being attached to a short angled bracket. The bracket attaches to the panel using the side with three holes. The other side of the bracket, which has holes, is oriented towards the larger end of the panel.]

6. Now shut the doors and place the panel under the door so that it fits in the space and mark the bottom of the door where to drill holes to attach it.
7. Drill holes in the bottom of the door using a 1/4" drill bit or slightly larger.
8. Attach the panels to the doors using 1 1/4" bolts, washers and lock nuts. Run the bolts through the angle first so the lock nuts are on the inside of the door.
9. Finally reinstall the outer door skins and the installation is complete.

Thank you for your purchase!

Return Policy

If for any reason you choose to return this product, it must be returned within 30 days from the date the item is received. You MUST package the product exactly as it was originally packaged from the factory to get a full refund for the product!

The vinyl windows should never be folded when packaging in the box or for storage purposes. Lay all the windows on top of each other with the canvas folded in between and the paper (if available) on both sides of the windows.

All returned products will be inspected upon arrival at the production facility and must be in unused, factory new condition to receive a refund. A 25% restocking fee will apply.

If ordered from Falcon Ridge, please call at 606-845-7439 to gain a return authorization number. Use our preferred shipping carrier (UPS) to return the item (unless the item is defective, in which case you are responsible for paying the shipping to return the item). Any returns submitted to Falcon Ridge without a return authorization number will be charged a 20% restocking fee. If ordered from one of Falcon Ridge's many distributors, you must first call them and see what their return policy is. Once your item reaches our production facility, our customer satisfaction team will inspect your item to ensure it is in unused, factory new condition. NOTE: All windshields must be returned with the original protective film intact and not removed. Do NOT REMOVE if you have any intentions of returning the item. Refund/replacement of a windshield will only be processed on items with original protective film or if the windshield is defective.

Items must be properly packaged in the original shipping carton to protect them during transit and ensure your returned item arrives back factory fresh and in new resalable condition (any returned items that have been used, altered, or damaged in any way will not be subject for a refund). All contents including instruction manuals, accessories, hardware, Velcro, etc. must be included in your return shipment. Only items in OEM factory new condition will be approved. Once returned items are received, credit will be issued to the original credit card/payment method used for the purchase. Outbound shipping and return shipping costs will not be refunded. Please allow 4 to 6 weeks for your refund to be processed.

Warranty

To The Owner of this Product:

Thank you for purchasing one of our Falcon Ridge Cab Enclosures, Tops &/or Windshields! Below are the terms under which your product is covered under our manufacturer's warranty.

30 Day Warranty: Includes, but is not limited to, replacing the enclosure, tops, and/or windshield due to a defect of the product. Please refer to the return policy in this case for more information.

1 Year Warranty: Includes any defect in material or workmanship. Within this time frame, we will gladly correct the problem or replace the enclosure, tops, &/or windshield. Upon submitting for the correction or replacement, we will need to receive pictures of the defect in material or workmanship along with the receipt from the date of purchase.