Falcon Ridge

Important Safety Information

⚠️ CAUTION: Do not smoke inside the cab or expose the product to direct flames. Product is FLAMMABLE. ?

Be sure to read these instructions thoroughly before opening and installing. The installation is best done when the temperature is 70 degrees F. or warmer. The temperature affects the adhesive Velcro; if conditions prevent installing in warmer weather, it helps to store the adhesive Velcro at room temperature prior to installation.

Installation Instructions

1. Carefully open the carton and remove the rolled up Top Cap on a large flat surface that is clean and free of dirt.
2. Check over the parts included in the carton with the parts list shown below:
   • Velcro hook strips: 5 each (1 extra), 6" long
   • Top Cap: 1 each
   If any parts are damaged or missing, please contact customer service at (606) 845-7439.
3. Place the Top Cap over the roll cage of the vehicle. Pull the corners down to determine the correct positions to place the 6" adhesive Velcro strips around the roll bars. The photos below show the correct way to attach the double-sided Velcro. Ensure that all corners are positioned correctly at all four corners, and then pull tight.

   Illustration of Attachment Process:

   • 1. A hand is shown peeling the protective backing off a 6-inch adhesive Velcro strip.
   • 2. The adhesive side of the Velcro strip is being pressed onto a section of the vehicle's roll bar.
   • 3. The Velcro strip is wrapped around the roll bar, with the hook side exposed and ready to attach to the Top Cap.
   • 4. The Top Cap is placed over the vehicle's roll cage, with its corners being pulled downwards to align with the roll bars.
   • 5. A corner of the Top Cap is being aligned and pressed onto the prepared Velcro strip on the roll bar.
   • 6. The Top Cap is shown fully secured to the roll bars via the attached Velcro strips.

Thank you for your purchase!

Return Policy

If for any reason you choose to return this product, it must be returned within 30 days from the date the item is received. You MUST package the product exactly as it was originally packaged from the factory to get a full refund for the product.

• The vinyl windows should never be folded when packaging in the box or for storage purposes. Lay all the windows on top of each other with the canvas folded in between and the paper (if available) on both sides of the windows.
• All returned products will be inspected upon arrival at the production facility and must be in unused, factory new condition to receive a refund. A 25% restocking fee will apply.
• If ordered from Falcon Ridge, please call at 606-845-7439 to gain a return authorization number. Use our preferred shipping carrier (UPS) to return the item (unless the item is defective; you are responsible for paying the shipping to return the item). Any returns submitted to Falcon Ridge without a return authorization number will be charged a 20% restocking fee.
• If ordered from one of Falcon Ridge's many distributors, you must first call them and see what their return policy is.
• Once your item reaches our production facility, our customer satisfaction team will inspect your item to ensure unused, factory new condition.
• NOTE: All windshields must be returned with the original protective film intact and not removed. Do NOT REMOVE if you have any intentions of returning the item. Refund/replacement of a windshield will only be processed on items with original protective film or if the windshield is defective.
• Items must be properly packaged in the original shipping carton to protect them during transit and ensure your returned item arrives back factory fresh and in new resalable condition (any returned items that have been used, altered, or damaged in any way will not be subject for a refund).
• All contents, including instruction manuals, accessories, hardware, Velcro, etc., must be included in your return shipment. Only items in OEM factory new condition will be approved.
• Once returned items are received, credit will be issued to the original credit card/payment method used for the purchase. Outbound shipping and return shipping cost will not be refunded.
• Please allow 4 to 6 weeks for your refund to be processed.

Warranty Information

To The Owner of this Product:

Thank you for purchasing one of our Falcon Ridge Cab Enclosures, Tops &/or Windshields! Below are the terms under which your product is covered under our manufacturer's warranty.

• 30 Day Warranty: Includes, and is not limited to, replacing the enclosure, tops, and/or windshield due to a defect of the product. Please refer to the return policy for more information.
• 1 Year Warranty: Includes any defect in material or workmanship. Within this time frame, we will gladly correct the problem or replace the enclosure, tops &/or windshield. Upon submitting for the correction or replacement, we will need to receive pictures of the defect in material or workmanship along with the receipt from the date of purchase.