Important Notice
⚠️ Notice: Do not smoke inside the cab or expose the enclosure to direct flames. Cab is Flammable. ?
Installation Instructions
-
Be sure to read these instructions thoroughly before opening and installing the Kubota RTV X900 Soft Door Kit. The installation is best done when the temperature is 70 degrees F. or warmer. The temperature affects the adhesive Velcro; if conditions prevent installing in warmer weather, store the adhesive Velcro at room temperature prior to installation.
-
Carefully open the carton and remove the enclosure on a large flat surface that is clean and free of dirt.
-
Check over the parts included in the carton with the parts list shown below:
Parts List Item Quantity Description Adhesive Velcro Hook Strips: 20 each 3" 2 each 6" 8 each 8" 2 each 10" 2 each 14" 2 each 17" Cab Enclosure 2 panels -
The top and front of the doors are held in place by double-sided Velcro strips that wrap around the roll cage. At each location, use a 3" adhesive Velcro strip placed on the inside of the roll cage to hold it in place. ? See diagrams below:
Diagram Description: The diagrams illustrate how the enclosure panel attaches to the vehicle's roll cage. One diagram shows a panel with double-sided Velcro connecting to a roll cage post that has a 3" adhesive Velcro strip applied. The other diagram shows a similar connection, emphasizing the attachment points.
-
The back of the door has a cutout with a bungee cord across it. This spot must go around the metal block sticking out the sides of the vehicle. Placing the door here helps line up the rest of the door so all the Velcro goes where they need to. ? See photo description below:
Photo Description: The photo shows the rear of the door panel, highlighting a cutout with a bungee cord. This cutout is designed to fit around a specific metal protrusion on the vehicle's side, aiding in alignment.
-
Now work your way around the door attaching the double-sided Velcro under the windshield and at the top rear corner of the door. ? See photo description below:
Photo Description: This photo illustrates the process of attaching the soft door enclosure. It shows double-sided Velcro being secured along the underside of the windshield area and at the top rear corner of the door panel.
-
The next step is to adhere the 10" and 17" adhesive strips on the exposed roll cage below the cutout with the bungee cord. The picture below shows how it should be attached. ? See photo description below:
Photo Description: This photo depicts the application of adhesive Velcro strips to the vehicle's roll cage. Specifically, it shows where to apply the 10" and 17" strips on the roll cage, located below the bungee cord cutout on the door.
-
Next, take the 14" adhesive Velcro strips and attach them to the vehicle just under where the roll cage ends down the front. ? See photo description below:
Photo Description: This photo shows the attachment of 14" adhesive Velcro strips to the front section of the vehicle, positioned just below the termination point of the roll cage.
-
The last step is to attach the rear of the door panel directly to the roll cage using 8" adhesive Velcro strips. ? See photo description below:
Photo Description: This photo illustrates the final attachment step, showing the rear of the door panel being secured to the vehicle's roll cage using 8" adhesive Velcro strips.
Return Policy
If for any reason you choose to return this product, it must be returned within 30 days from the date the item is received. You MUST package the product exactly as it was originally packaged from the factory to get a full refund for the product!
The vinyl windows should never be folded when packaging the box or for storage purposes. Lay all the windows on top of each other with the canvas folded in between and the paper (if available) on both sides of the windows.
All returned products will be inspected upon arrival at the production facility and must be in unused, factory new condition to receive a refund - a 25% restocking fee will apply.
If ordered from Falcon Ridge, please call at 606-845-7439 to gain a return authorization number. Use our preferred shipping carrier (UPS) to return the item (unless the item is defective; you are responsible for paying the shipping to return the item.) Any returns submitted to Falcon Ridge without a return authorization number will be charged a 20% restocking fee.
If ordered from one of Falcon Ridge's many distributors, you must first call them and see what their return policy is. Once your item reaches our production facility, our customer satisfaction team will inspect your item to ensure unused, factory new condition.
NOTE: All windshields must be returned with the original protective film intact and not removed. Do NOT REMOVE if you have any intentions of returning the item. Refund/replacement of a windshield will only be processed on items with original protective film or if the windshield is defective.
Items must be properly packaged in the original shipping carton to protect them during transit and ensure your returned item arrives back factory fresh and in new resalable condition. Any returned items that have been used, altered, or damaged in any way will not be subject to a refund.
All contents, including instruction manuals, accessories, hardware, Velcro, etc., must be included in your return shipment. Only items in OEM factory new condition will be approved.
Once returned items are received, credit will be issued to the original credit card/payment method used for the purchase. Outbound shipping and return shipping costs will not be refunded.
Please allow 4 to 6 weeks for your refund to be processed.
Warranty
To The Owner of this Product:
Thank you for purchasing one of Falcon Ridge Cab Enclosures, Tops &/or Windshields! Below are the terms under which your product is covered under our manufacturer's warranty.
30 Day Warranty: This includes, but is not limited to, replacing the enclosure, tops, and/or windshield due to a defect of the product. Please refer to the return policy for more information.
1 Year Warranty: This includes any defect in material or workmanship within this time frame. We will gladly correct the problem or replace the enclosure, tops, &/or windshield. Upon submitting for correction or replacement, we will need to receive pictures of the defect in material or workmanship along with the receipt from the date of purchase.
? Thank you,
Falcon Ridge
