FALCON RIDGE
2515 Bypass Rd. Flemingsburg, KY 41041
Phone: 606-845-7439
Instructions for Installation and Care of
CF Moto Z-Force 950 Polycarbonate Rear Window
Model: CF-Z950-RW02
NOTICE: Please check contents of package for any damage and make sure all parts fit correctly and you are happy with the product before removing protective film. Once the film is removed, you cannot return the product for a full refund.
Installation Instructions
- Be sure to read these instructions thoroughly before opening and installing the Wildcat Trail / Sport Polycarbonate Rear Window.
- Check over the parts included in the cartons with the parts list shown below:
- 1 3/4" Loom Clamps (6 each)
- 1" Bolts (6 each)
- Thumb Nuts (6 each)
- Small Washers (6 each)
- End Bulb Gasket (35" piece)
- Rear Window (1 each)
- Start by pulling it out of the box, find a clean area to lay it down, and install the hardware. Peel off the protective film from both sides of the Rear Window. Next, install the rubber gasket along the bottom of the window.
- Take the six Loom clamps and place them around the roll cage at each of the designated slots on the sides and across the top. The mounting hardware consists of a stainless bolt, stainless washers, a thumbnut, and a stainless clamp with a rubber sleeve. The bolt passes through the window and the clamp, which is secured to the UTV frame tube using the washers and thumbnut.
Care and Cleaning Instructions
Now you are ready to take it out and enjoy. To clean the windshield, always use a liquid cleaner to minimize the chance of scratches. Micro-fiber cloths, readily available at most stores, are recommended. Any standard window cleaner will work effectively, provided a soft clean rag or micro-fiber cloth is used for cleaning.
