ITEM NO. : B3297-3BU

Follow these steps for proper assembly:

1. Install the mounting plate (A) on the outlet box by using the screws (B).
2. Loosen the hex nut around the bolt (C) and screw in or unscrew the bolt from the junction box to get the right length for installation.
3. Connect the fixture wire to the circuit wire by wire nuts (D): black wire with live wire, white wire with neutral wire, ground wire with ground wire.
4. Fix the lamp body (E) to the mounting plate (A) by the ball nuts (F).
5. Place the lamp shade (G) on the socket and tighten it with the socket ring (H).

Please consult a qualified Electrician if you are not familiar with electrical wiring. ⚡

Diagram Description:

The diagram illustrates the assembly process for a lighting fixture. It shows:

• An outlet box with connections for Live Wire, Neutral Wire, and Ground Wire.
• A mounting plate (A) attached to the outlet box using screws (B).
• A bolt (C) with a hex nut, used for adjusting length.
• Wire nuts (D) for connecting fixture wires (black, white, ground) to house wires.
• A lamp body (E) that attaches to the mounting plate.
• Ball nuts (F) used to secure the lamp body.
• A lamp shade (G) that fits onto a socket and is secured by a socket ring (H).