Z-67NAAJFU-4711 Lighting Fixture Installation Guide

Important Safety Information

WARNING: To reduce the risk of fire, electric shock, or personal injury, it is recommended that installation be performed by a licensed electrician. Always read instructions carefully and save them for future reference. Ensure electricity is shut off at the source (main fuse or circuit breaker) before commencing any work. Verify the mounting surface is clean, dry, flat, and strong enough to support the fixture's weight. Ensure the voltage used is 120V and do not exceed the maximum wattage of 40W per bulb. Keep the lamp away from acidic and alkaline substances. Wait for bulbs to cool before replacing them.

Tools Required (Not Included)

• Ladder
• Phillips head/flat blade screwdriver
• Electrical tape
• Pliers
• Wire cutter/stripper

Parts Included

The fixture includes various parts such as a mounting plate, canopy, sockets, glass shades, and hardware. Refer to the detailed illustration in the original document for a complete list and quantities.

Assembly & Installation Steps

The installation process involves several key steps:

1. Prepare the fixture and check all parts.
2. Attach the mounting plate to the outlet box, ensuring the "GND" side faces out.
3. Make wire connections according to the provided charts, paying close attention to ground wire connections.
4. Secure the canopy to the outlet box using the provided hardware.
5. Attach the glass shades to the sockets.
6. Install bulbs (not included), adhering to the maximum wattage recommendation.
7. Check the installation for proper function before turning on the light.

Cleaning and Ordering Parts

To clean the fixture, wipe it with a soft cloth. Use a mild cleaner for glass shades. Avoid abrasive materials. Replacement parts can be ordered from the place of purchase using exact wording from the illustration.