Televes NanoKom Mast Amplifier
Model: LTE700, 2nd Digital Dividend
Inputs: 3 (UHF-UHF-VHFmix)
Product Overview
The Televes NanoKom mast amplifier is designed for amplifying and combining terrestrial television signals from multiple antennas. It features three inputs: two UHF inputs that are amplified, and one VHF input that is combined. The amplifier is powered via the output coaxial cable and is RED compliant.
Reference: 561721
Logical Reference: MVM327LTE2
EAN13: 8424450201725
Other Features
- Colour: Orange
Packaging Information
- Box: 1 pcs.
- Carton: 10 pcs.
Physical Data
- Net weight: 201.00 g
- Gross weight: 223.00 g
- Width: 88.00 mm
- Height: 79.00 mm
- Depth: 42.00 mm
- Main product weight: 201.00 g
Highlights
- Separate amplification with a very low noise figure, ensuring signal quality.
- Ultra-small ergonomic design.
- EasyF connection system for simplified and reliable connections.
- Can be powered within the 12 V to 24 V range.
- Includes an LTE filter to eliminate mobile phone interference.
- Features an ON/OFF switch for DC pass to one of the UHF inputs, enabling the powering of a BOSS system.
- Easy mounting with an included clamp for mast installation.
- Constructed with a resistant ABS-plastic orange case suitable for outdoor installation.
- Manufactured using fully automated processes under stringent quality controls.
- Incorporates a high-screening Zamak chassis.
EasyF Connection System: Simplicity and Savings
The EasyF connection system is an innovative concept where the coaxial cable's inner conductor is directly inserted into the device, enhancing connection reliability. The absence of F connectors allows for a reduced chassis size and secures two cables with a single screw.
- Real-time savings: Installation is faster as coaxial cable termination is not required. Connecting connectors to the device, which can be difficult in tight spaces, is also eliminated.
- Connection reliability: The cable clamp prevents coaxial cables from detaching.
- Cost savings: No additional connectors (F or IEC) are needed.
- Space optimization: Inputs and outputs are positioned on the same side of the device to prevent coaxial cable bending and facilitate work within cabinets and register boxes.
- Easy three-step mounting: Connecting cables involves simply screwing and unscrewing the covers.
Connection Steps:
- Unscrew the device's cover to access the connection point.
- Insert the previously stripped coaxial cables.
- Close the cover and screw to ensure a secure connection.
The connection between the coaxial cable and the device is made using an automated system for contact insertion of the inner conductor, without soldering. This ensures:
- Longevity: The device's operating life is extended as solder wear over time is eliminated.
- Reduced failure rate: Prevents issues typically caused by cold soldering joints.
- Optimized electromagnetic behavior: Particularly for high frequencies.
- Environmental commitment: Pollution from welding processes is eliminated, and production power consumption is reduced.
Application Example
Technical Specifications: Ref. 561721
| Bands | VHF | UHF 1 | UHF 2 |
|---|---|---|---|
| Frequency range (MHz) | 47 ... 254 | 470 ... 694 | 470 ... 694 |
| Gain (dB) | -1.5 | 28 | 40 |
| Gain adjustment range (dB) | 0 ... 20 | - | - |
| Output level DIN45004B (dBmV) | 48 | 55 | 55 |
| Output level EN50083 (dBmV) | - | 6.5 | 6.5 |
| Noise figure (dB) | 3 | - | - |
| Number of inputs | 1 | 1 | 1 |
| Inputs/Bands | VHF | UHF | UHF |
| Max current input (mA) | 0 | 0 | 0 |
| Powering (Vdc) | 12 ... 24 | ||
| Current consumption (mA) | 50 | ||
| Protection index (IP) | 23 | ||
| Operating temperature (°F) | 23 ... 113 | ||
