Televes NanoKom Mast Amplifier and PicoKom Power Supply Kit
Reference: 438620
Product Overview
This kit includes the Televes NanoKom mast amplifier (Ref. 561621) and the PicoKom power supply (Ref. 5796). It is designed to amplify and combine terrestrial and satellite TV signals from different antennas.
NanoKom Mast Amplifier (Ref. 561621)
The NanoKom is a mast amplifier with 3 inputs: UHF, VHF coupled, and BIS coupled (SAT). It amplifies UHF signals while coupling VHF and BIS (SAT) signals. It features a current passage on the satellite input to power the LNB.
PicoKom Power Supply (Ref. 5796)
The PicoKom power supply provides 12V - 220mA with 1 output. It transfers current through the input coaxial cable while allowing the TV signal to pass. This unit is used to remotely power mast amplifiers or BOSS systems. It is compatible with satellite-coupled amplifiers (BIScoupled) as it automatically detects the presence of an LNB signal (voltage and 22 kHz) from a receiver and switches to the dedicated input.
Key Features and Specifications
- USOS Technology: Allows the installer to select the output level, which remains stable. The product automatically adapts its parameters to input signal variations.
- Separated Amplification: Features a very low noise factor, preserving signal quality.
- Ergonomic Design: Ultra-compact and ergonomic.
- EasyF Connection: Features the innovative EasyF connection system for the coaxial cable's inner conductor (core), ensuring a reliable connection.
- Power Options: Can be powered between 12V and 24V.
- Quality Manufacturing: Fully automated manufacturing with rigorous quality controls.
- Durable Chassis: Shielded chassis made of Zamak.
- LTE700/5G Filter: Includes a filter to eliminate mobile telephony interference.
- ON/OFF Switch: For DC remote powering on the UHF input, to activate a BOSS system.
- Easy Installation: Simple mounting with a bracket for mast fixation.
- Robust Housing: Orange ABS plastic housing for outdoor installations.
- Physical Data: Net weight 514.00 g, gross weight 564.00 g, dimensions 88 x 79 x 42 mm.
- Packaging: Available in blister (1 piece) and box (8 pieces).
- EAN13: 8424450228180
EasyF Connectivity: Simplicity and Economy
The EasyF connection system innovates coaxial cable connection by inserting the core directly into the device, enhancing connection reliability. It reduces chassis size and secures the connection of two cables with a single screw, eliminating the need for additional 'F' or 'CEI' connectors.
- Time Savings: Reduces installation time by eliminating the need to connectorize coaxial cables and the process of screwing connectors onto the device.
- Connection Reliability: The cable retention bracket prevents the coaxial cable from detaching.
- Space Optimization: Inputs and outputs are located on the same side, preventing cable bending and facilitating work within cabinets and enclosures.
- Simple 3-Step Mounting: Unscrew the cover, insert pre-stripped coaxial cables, and close and screw the cover to secure the connection.
EasyF connections are made via an automated system that inserts the core by contact, eliminating the need for soldering. This increases the device's lifespan by preventing solder deterioration over time, reduces defects caused by cold solder joints, optimizes electromagnetic performance at high frequencies, and contributes to environmental protection by eliminating soldering contamination and reducing production electricity consumption.
Application Example
The diagram illustrates a typical installation setup involving a terrestrial antenna (VHF/UHF), a satellite dish, the Televes NanoKom amplifier (561621), the Televes PicoKom power supply (5796), a TV set, and a set-top box (STB). The system shows signal flow and power distribution for a MATV+SAT installation.
