Sylvox Ceiling Mount for Medium TVs and Displays
Model: T560-15
Designed for screen sizes 32"-65" with a weight capacity of 35kg / 77 lbs and VESA compatibility from 100x100 to 600x400.
Important Safety Information and Warnings
- The manufacturer reserves the right to modify or alter installation instructions without formal notice.
- Severe personal injury and property damage can result from improper installation or assembly. Read the following warnings carefully before beginning.
- Products must be installed by professionals. If you do not understand the instructions or have any concerns or questions, please contact a qualified local installer.
- Do not install or assemble if the product or hardware is damaged or missing. If you require replacement parts, please contact your local distributor for assistance.
- This product fits most 32"-65" LCD/plasma screens; maximum weight of LCD/plasma screen: 35kg / 77lbs.
- This product has been designed for use on a vertical wall constructed of wood studs (minimum 2" x 4" inch (51x102mm)) or masonry (solid concrete).
- For safe installation, the wall you are mounting to must support a minimum of 3 times the weight of the total load (the mount, the TV, and all accessories).
- Do not use this product for any other application than originally designed.
- This product contains moving parts; please use with caution.
- When installing flat panel displays, please do not damage electrical wiring or power source.
- Installation and routing of monitor cables on the monitor bracket must comply with electro-technical regulations.
- Importantly, mains- and data-cables must be secured against twisting, squeezing, or shearing.
- The manufacturer will bear no responsibility for the vertical wall of mounting, or incidental or consequential damages arising thereof.
- The manufacturer disclaims any liability for modifications, improper installation, or installation over the specified weight range. The manufacturer will not be liable for any damages arising out of the use of, or inability to use, the product.
Tools Required
- Drill with appropriate bits ?
- Phillips Head Screwdriver ?
- Flat Head Screwdriver ?
- Level ?
- Pencil ✏️
- Stud Finder (for wood stud installation) ?
Parts List
| Part | Description | Quantity |
|---|---|---|
| A | M8 x 48.2mm screw | 6 |
| B | M8 x 48.2mm screw | 6 |
| C | M8 x 48.2mm screw | 6 |
| D | M5 x 15mm screw | 4 |
| E | M6 x 15mm screw | 4 |
| F | M8 x 15mm screw | 4 |
| G | M8 x 15mm screw | 4 |
| H | M8 x 60mm screw | 2 |
| I | M8 x 55mm screw | 2 |
| J | 6mm Washer/Spacer | (Not Specified) |
| K | M6 x 8mm screw | (Not Specified) |
Installation Instructions
Step 1: Column Assembly
Assemble the main support column. This mount allows for two-column (1a) or three-column (1b) assembly configurations using the provided parts.
Note: The center column has a breakaway feature that is activated during ceiling installation.
Step 2: Prepare Ceiling Attachment
For Solid Concrete (2a): Drill holes into the solid concrete ceiling and insert appropriate anchors (not supplied). Ensure the holes are the correct size (e.g., Ø10mm). The diagram shows drilling and anchor insertion.
For Wood Studs (2b): Locate the wood studs using a stud finder. Drill pilot holes into the studs and secure the mounting plate using appropriate screws (not supplied). The diagram illustrates finding studs and screwing into them.
Step 3: Attach TV Mounting Arms
Attach the VESA mounting arms to the back of your TV. Use the appropriate screws (D, E, F, G) and spacers if necessary, ensuring compatibility with your TV's VESA pattern (e.g., 100x100 to 600x400mm). The diagrams (3a for concrete, 3b for wood stud) show this process, indicating the use of parts D, E, F, G.
Step 4: Install Ceiling Plate
Attach the ceiling plate to the ceiling structure. For solid concrete, use screws H, I, and washers J. For wood studs, use appropriate lag screws (not supplied). The diagrams (4a for concrete, 4b for wood stud) detail the hardware and placement.
Step 5: Connect Column to Ceiling Plate
Connect the assembled column (from Step 1) to the installed ceiling plate. Ensure a secure fit.
Step 6: Hang TV and Secure
Carefully lift the TV with the attached mounting arms onto the column assembly. Secure the TV to the mount using parts K. The mount allows for tilt adjustment of +15°/-5°.
The diagrams (6a and 6b) illustrate the process of hanging the TV and making final adjustments, showing VESA patterns 100x100 to 200x200mm and 400x200 to 600x400mm.
Diagrammatic Overview
The installation process involves several key stages visually represented in the diagrams:
- Parts Identification: A comprehensive list of hardware (A-K) and tools required.
- Column Assembly: Building the main vertical support structure.
- Ceiling Mounting: Securing the ceiling plate to either concrete or wood studs.
- TV Arm Attachment: Connecting the VESA brackets to the television.
- Final Assembly: Hanging the TV onto the ceiling mount and securing it, with options for tilt adjustment.
The diagrams also show the overall dimensions and spacing requirements for installation.
