Sylvox S50MCMA0 Rolling TV Stand

Contents

(Note: The original document contained a table of contents. The following structure reflects the main sections.)

• Warning
• Material List
• Assembly and Installation
• Product Technical Specifications

Warning!

Improper assembly or installation can lead to serious injury, death, or property damage. Please read the instructions and warning information carefully before beginning assembly or installation.

• If you do not understand the instructions or have any questions or concerns, please contact a qualified local installer.
• Do not assemble or install the product if any parts are damaged or missing. If you need replacement parts or assistance, please contact your local dealer.
• This product is suitable for 65"-120" LCD/Plasma screens, with a weight capacity of 150KG/330LBS.
• Do not use this product for any purpose other than its intended design.
• The manufacturer disclaims any legal responsibility for damages or injuries resulting from the following situations: modifications to the product, improper installation, installation exceeding the specified weight capacity, or misuse that causes wear or damage to the product.
• If children or teenagers climb on the audiovisual furniture due to toys, objects, remote controls, etc., placed on it, the furniture may topple, resulting in serious injury or even death.
• Changing the installation location of the audiovisual furniture or reinstalling it in a place that cannot support its weight may cause the furniture to topple, resulting in serious injury or even death.
• When using the stand, ensure that the ground is solid and level to keep the stand balanced. It is normal for some parts to show rust when used outdoors. In severe weather conditions, such as strong winds and heavy rain, additional protective measures should be taken to prevent potential damage to your property.
• In case of any discrepancies between the illustrations and the actual product, please refer to the actual product.

Instructions Overview

Bill of Materials

(Note: The original document displays parts with labels and quantities. This is represented as a list.)

• Main Frame Components:
  • Long horizontal bars (3X)
  • Vertical columns (2X, Left and Right)
  • Angled legs (2X, Left and Right)
  • Lower cross beam (1X)
  • Upper cross beam (1X)
• TV Mounting Components:
  • Vertical mounting rails (2X)
  • Horizontal TV bracket bar (1X)
• Accessories:
  • Rear storage box (1X)
• Hardware:
  • A: Wrench (1X)
  • B: Screw M6×20mm (4X)
  • C1: Bracket (2X)
  • C2: Bracket (2X)
  • D: Screw M8×20mm (4X)
  • E: Wheel (12X)
  • F: Screw M10×25mm (4X)
  • G1: Screw M8×25mm (4X)
  • G2: Screw M6×25mm (4X)
  • H1: Washer Φ15×48.2×10mm (4X)
  • H2: Washer Φ8×18×1.2mm (4X)

Assembly and Installation

(Note: The following steps describe the assembly process based on the diagrams.)

1. Install the Wheels

Attach the 4 wheels (Part E) to the bottom of the 4 legs. Use the provided wrench (Part A) to secure and tighten them.

2. Assemble the Legs with the Lower Cross Beam

Connect the lower cross beam to the two angled legs. Use 2x Part E screws and 2x Part B screws for each leg connection.

3. Assemble the Upper Cross Beam

Attach the upper cross beam to the two vertical columns. Use 4x Part E screws and 4x Part B screws for this step.

4. Assemble the Columns with the Legs

Connect the assembled upper structure (columns and upper cross beam) to the leg assembly (legs and lower cross beam). Use 2x Part D screws and 2x Part B screws for each side.

5. Install the TV Mount

Note: When installing the TV, be sure to use the height-raising pad (Parts H1/H2) to prevent potential damage to your TV equipment from screws that may be too long when tightened.

Attach the vertical mounting rails (G1/G2) to the back of your TV using the appropriate screws and washers (H2, or H1 and H2). Ensure the rails are aligned with the VESA mounting holes on your TV.

Attach the C1 and C2 brackets to the main stand structure.

6. Install the Rear Storage Box

Attach the rear storage box to the back of the TV stand at the designated mounting points.

Product Technical Specifications

(Note: Dimensions are provided in millimeters unless otherwise stated.)

• Overall Width: 1380mm
• Overall Height: 1738mm
• Main Support Depth: 765mm
• Maximum TV Width: 1200mm
• Maximum TV Height: 600mm
• Storage Box Depth: 85mm
• Storage Box Width: 235mm
• VESA Mounting Hole Spacing (Vertical): 110mm, 140mm
• Weight Capacity: 150KG / 330LBS
• Compatible TV Screen Sizes: 65" - 120"