Sink Cabinet Assembly Instructions

Important Information & Safety Warnings

Assembly Recommendation: It is recommended to assemble this furniture with another person to improve efficiency and shorten assembly time. ?

Assembly Surface: To avoid scratching the furniture, assemble it on a soft surface, such as a rug. ⚠️

Anti-Topple Warning: Overturned furniture can cause serious or fatal crush injuries. To prevent tipping, always use the wall attachment provided or purchase a suitable one for your wall. Seek professional advice if unsure. Follow all instructions carefully. ⚠️

Screw Tightening: For stability throughout the product's lifespan, re-tighten all screws 2 weeks after assembly and every 3 months thereafter. ⚙️

Maintenance and Cleaning: - For the frame: Use a rag dipped in neutral detergent, wipe clean, and then dry with a clean rag. - For glass materials: Wipe with a rag dampened with glass cleaner, then dry with a dry rag.

Installation Caution: Do not use an electric screwdriver, and do not apply excessive force when installing, as the board is prone to breaking. ⚠️

Tipover Prevention for Children: Children have died from furniture tipover. To reduce the risk:

• ALWAYS install the tipover restraint provided.
• NEVER place a TV on this product.
• NEVER allow children to stand, climb, or hang on drawers, doors, or shelves.
• NEVER open more than one drawer at a time.
• Place the heaviest items in the lowest drawers.

This is a permanent label. Do not remove! ?

Tools Required

Please prepare the following tools for assembly:

• Pencil
• Hammer
• Phillips Head Screwdriver
• Electric Drill

Parts List

When installing, carefully confirm that each screw corresponds to the manual. Accessories with similar shapes can be distinguished by size.

• A: Eccentric Rod (35mm) - x22
• B: Cam Lock - x22
• C: Wooden Dowel (30mm) - x10
• D: Screw (35mm) - x4
• E: Screw (16mm) - x4
• F: Screw (12mm) - x24
• G: Screw (25mm) - x10
• H: Screw (18mm) - x4
• J: Hinge - x4
• K: Layer Pin - x4
• L: Handle - x2
• N: Layer Pin - x4
• P: Wall Anchor - x2
• Q: Wall Bracket - x2
• R: Screw (40mm) - x2
• S: Screw (12mm) - x2

Part Identification:

• 1: Top Panel
• 2: Left Side Panel
• 3: Right Side Panel
• 4: Bottom Panel
• 5: Left Door
• 6: Shelf
• 7: Back Panel
• 8: Middle Divider
• 9: Shelf
• 10: Kick Plate
• 11: Shelf
• 12: Back Support
• 13: Support Bracket
• 14: Support Panel
• 15: Support Panel
• 16: Shelf
• 17: Right Door

Assembly Steps

1. Screw eccentric rod (A) into board 8.
2. Connect boards 6, 9, and 16 to board 8 using wooden dowel (C). Insert cam lock (B) into boards 6, 9, 16 and turn clockwise to tighten.
3. Screw eccentric rod (A) into board 4.
4. Connect board 10 to board 4 using wooden dowel (C). Insert cam lock (B) into board 10 and turn clockwise to tighten.
5. Connect board 8 to board 4 using wooden dowel (C), and fix with screw (D).
6. Screw eccentric rod (A) into board 14. Fix board 15 to board 14 with screw (G).
7. Insert back board 7 along the available grooves.
8. Connect board 14 to board 8, insert cam lock (B) into board 8 and turn clockwise to tighten. Fix board 12 to board 8 with screw (D).
9. Fix part (Q) to boards 2 and 3 with screw (S). Screw eccentric rod (A) into boards 2 and 3.
10. Connect boards 2 and 3 to the assembled component using wooden dowel (C). Insert cam lock (B) into the boards and turn clockwise to tighten.
11. Fix board 13 to boards 2 and 3 with screw (G). Insert layer pin (N) into boards 2 and 8.
12. Place shelf board 11 into position.
13. Fix board 13 to board 8 with screw (G). Insert layer pin (N) into board 2 and 8.
14. Fix hinge (J) to boards 5 and 17 with screw (F). Fix handle (L) to boards 5 and 17 with screw (H).
15. Assemble doors 5 and 17 to boards 2 and 8 by fixing the hinges with screw (F).
16. Insert buckle (K) into back slots and fix with screw (E).
17. Install the anti-tipping device as shown using wall anchors (P) and screws (R) into the wall, and attach to the cabinet using bracket (Q) and screw (R).

Warranty Information

Warranty Claims

• There is a 30-day warranty for broken furniture or other functional problems, starting from the date of purchase, verified by proof of purchase.
• For assistance or replacement parts, contact customer support with your purchase order number and details of the problem. Replacements will be arranged within 48 hours. If a part is out of stock, you will be notified of the shipping date.
• The product must be used in accordance with the provided instructions.
• For returns due to reasons other than defects, the furniture must be cleaned and dried within 30 days of receipt.

Type of Warranty Claim

• Failure to follow assembly instructions will invalidate the warranty.
• Damage during installation is not covered, but damage during transportation is covered.

Scope of Responsibility

• No responsibility will be borne for misuse, user damage, or loss of parts during installation.
• Damage and scratches to the furniture after use are not covered by the warranty.

Warranty Coverage (US)

• Sheet parts: 1 month from the date of purchase.
• Electrical parts: 1 month from the date of purchase.

Returns and Defective Items

• Changed Your Mind: Follow the retailer's instructions for returns if you have simply changed your mind.
• Defective Items: If an item is defective but the cause is not identifiable, contact customer support first.
• Damaged Items: If an order has obvious shipping damage upon receipt, refuse the delivery. If accepted and damage is found later, follow the retailer's specific instructions. Always save all packaging material and paperwork. Failure to do so may jeopardize your claim.