FUFUGAGA 47.2"W Bathroom Medicine Cabinet

Important Information & Safety Warnings

Please read the entire manual before starting assembly and/or use. Follow the manual thoroughly and keep it for future reference.

• AVOID SCRATCHES! Assemble on a soft surface like a rug.
• IMPROVE EFFICIENCY! Consider having a partner for installation.
• ANTI-TOPPLE WARNING! Overturned furniture can cause serious or fatal crush injuries. Ensure the wall attachment is used. If not included, purchase one suitable for your wall type. Seek professional advice if unsure. Follow all steps carefully.
• IMPORTANT! Re-tighten all screws 2 weeks after assembly and every 3 months thereafter to ensure stability.
• For cleaning: use a rag dipped in neutral detergent for the frame, then dry with a clean rag. For glass, use water-based glass cleaner and a dry rag.
• Do not use an electric screwdriver or excessive force, as the board is easy to break.

NEVER put a TV on this product. NEVER allow children to stand, climb, or hang on drawers, doors, or shelves. NEVER open more than one drawer at a time. Place heaviest items in the lowest drawers.

This is a permanent label. Do not remove!

Parts and Tools Required

Please prepare the following tools and parts:

• A (x32): M6.5 x 35 mm Screws (Eccentric Rods)
• B (x32): Cam Locks
• C (x24): Wooden Dowels (8 x 30 mm)
• D (x12): M3.5 x 14 mm Screws
• E (x4 sets): Hinges (M4 x 9 mm / M4 x 16 mm screws)
• F (x4): M3 x 14 mm Screws
• G (x12): M3 x 12 mm Screws
• H (x3): Wire Boxes (26 x 11 mm)
• J (x6): Stick Parts (19 x 14 x 8 mm)
• K (x1): Power Cord (1.5 m)
• L (x2): Hinges (35 mm)
• M (x2): Light Strips (260 mm)
• N (x12): Parts for fixing
• P (x6 sets): Wall Anchors and Screws (for wall mounting)

Note: Similar-shaped accessories can be distinguished by size.

Assembly Instructions Summary

The assembly involves connecting various boards using screws, dowels, and cam locks, followed by attaching back panels, doors, and electrical components. Detailed steps are outlined below:

1. Prepare Boards: Screw eccentric rods (A) into boards 3 and 4. Attach stick parts (J) to boards 4 and 1, and board 2.

2. Assemble Main Frame: Connect boards 3 and 4 using wooden dowels (C) and secure with cam locks (B). Attach board 8 to boards 3 and 4 similarly.

3. Add Shelving/Support: Screw eccentric rods (A) into board 5. Fix part (N) to board 5 with screws (G). Attach board 7 to board 5 using cam locks (B).

4. Integrate Components: Fix part (N) to board 9 with screws (G). Connect boards 5 and 9 to the main frame (boards 3 & 4) using dowels (C) and cam locks (B).

5. Install Back Panels: Insert back boards 12 and 13 into the grooves of the assembled frame.

6. Assemble Cabinet Body: Screw eccentric rods (A) into board 6. Attach board 7 to board 6 using cam locks (B). Connect board 6 to the main frame (boards 3 & 4) using dowels (C) and cam locks (B).

7. Install Lighting and Wiring: Place wire box (H) on board 5, pass light strip (M) through. Fix back board 12 with screws (F).

8. Attach Front Panels/Doors: Screw eccentric rods (A) into boards 1 and 2. Stick part (J) to boards 1 and 2. Attach boards 1 and 2 to the main structure using dowels (C) and cam locks (B).

9. Final Touches: Add cam locks (B) to board 9. Place wire box (H) on board 5.

10. Install Hinges and Doors: Fix hinges (L) to board 10 with screws (D). Assemble door 10 to board 3 using hinges and screws (D). Fix hinges (E) to board 11. Assemble doors 11 to boards 1 and 2 using hinges (E) and screws (E).

11. Wall Mounting: Drill holes on the wall, insert wall anchors (P). Fix the cabinet to the wall using screws (P).

12. Electrical Connection: Pass the power cord (K) through part (J) to connect with the power supply. For door alignment issues, refer to the video: https://youtu.be/n0Lb36SoODM.

Electrical Connections and Features

This product is designed for standard voltage inputs.

• Input Voltage: 110V AC
• Output Voltage: 12V DC
• Touch Switch Features:
  • ON/OFF/Color Temperature: Short press to turn on/off and cycle through color temperatures (4000K Neutral, 6500K Cool White, 3000K Warm Yellow). Press and hold for 2-3 seconds to activate the dimmer function.
  • Defogger Button: Short press to activate/deactivate the anti-fog function.

Note on Wall Switch Connection: While plugs are provided and recommended, if linking to a wall switch, the plug can be cut off. Note: Cutting the plug voids the warranty. It is recommended to contact an electrician or operate under professional guidance.

Warranty and Returns

Warranty Claims:

• A 30-day warranty covers manufacturing defects or functional issues. The warranty starts from the date of purchase, verified by proof of purchase.
• Contact FUFUGAGA for assistance. Provide purchase order number and problem details for replacement parts. Allow 48 hours for arrangement.
• Products must be used according to instructions.
• Returns for reasons other than defects must be cleaned, dried, and initiated within 30 days of receipt.
• Failure to follow instructions invalidates the warranty. Damage during installation is not covered, but damage during transportation is.

Scope of Responsibility:

• FUFUGAGA is not responsible for misuse, user damage, or loss of parts during installation.
• Damage and scratches after use are not covered.

Warranty Coverage Areas (US):

• Sheet parts: 1 month from purchase date.
• Electrical parts: 1 month from purchase date.

Returns:

• Changed Mind: Follow the retailer's return instructions.
• Defective Items: Contact FUFUGAGA first for troubleshooting.
• Damaged Items: If shipping damage is obvious, refuse delivery. If accepted and damage is found, follow retailer instructions. Save all packaging and paperwork. Disposing of packaging or returning without contact may jeopardize claims and credits.