Baby Trend Deluxe II Nursery Center

Warranty Information

DO NOT RETURN YOUR PRODUCT TO THE STORE. PLEASE CONTACT BABY TREND® FOR REPLACEMENT PARTS, SERVICE AND REPAIR.

The Baby Trend® warranty covers workmanship defects within 1 year of purchase. Any product subjected to misuse, abuse, abnormal use, excessive wear and tear, improper assembly, negligence, environmental exposure, alteration, or accident, or with an altered/removed serial number, invalidates all claims. Damage to property during installation is the end user's sole responsibility.

Customer Service is available Monday through Friday, 8:00 a.m. to 4:30 p.m. (PST). Return Authorizations are required prior to returning products. Visit babytrend.com/pages/limited-warranty for complete details.

(Spanish translation of warranty information is also provided in the original document but merged here into English for primary language.)

Safety Warnings

Failure to follow instructions could result in serious injury or death.

INFANT SUFFOCATION HAZARD:

• Do not allow gaps between the mattress and product sides.
• NEVER add extra mattresses, pillows, comforters, or padding. Use only the Baby Trend® mattress.
• The playard mattress/pad is designed to prevent suffocation, featuring a solid base, specific dimensions, and less than one inch thickness. Using a thicker or different sized mattress may cause a child's head to become trapped.
• To reduce the risk of SIDS, place healthy infants on their back to sleep, unless advised otherwise by a physician.
• NEVER use plastic shipping bags or other plastic film as mattress covers; they can cause suffocation.
• NEVER use a water mattress with this product.

STRANGULATION HAZARD:

• NEVER leave an infant in the product with sides down. Infant may roll into spaces between the pad and loose mesh sides, causing suffocation.
• Strings can cause strangulation. NEVER place items with strings around a child's neck (e.g., hood strings, pacifier cords). NEVER suspend strings over the playard or attach them to toys.
• NEVER place the product near windows where blind or drape cords can strangle a child.
• Child entrapment and death can occur if improvised netting or covers are placed on the playard. Never add such items.
• Ensure the full-size bassinet is fully assembled and locked before using accessories like the changing table.
• NEVER leave a child in the product with sides lowered. Always ensure sides are raised and locked.
• The playard, including side rails, must be fully erected and latches secure before use.
• Discontinue use when a child can climb out, reaches 35 in. (890 mm), or weighs 30 lbs. (14 kg).
• When a child can pull to stand, remove bumper pads, large toys, and other objects that could serve as steps.
• ALWAYS provide necessary supervision for your child's safety. Never leave children unattended.

FALL HAZARD:

• Ensure the playard and changing table are secure before placing a child in it. Check regularly.
• NEVER leave the bassinet or changing table in place when a child is in the playard.
• Only one child can use the Playard/Nursery Center at a time.
• NEVER use if parts are loose, missing, broken, or fabric/mesh is torn. Check before assembly and periodically.
• Contact Baby Trend Customer Service for replacement parts or repair. NEVER substitute parts.
• This product is not intended for commercial use.

IMPORTANT NOTICE: Always store the instruction manual inside the storage pocket.

Parts List

Before assembly, check that you have all the parts for this model:

• Playard Frame
• Mattress
• Travel / Storage Bag
• Full-Size Bassinet with metal support tubes
• Canopy / Toy Bar with plush toys
• Long Curved Bars (2)
• Short Bar with Connector Knobs (2)
• Changing Table
• Parent Organizer
• Music Center (with or without vibration)

Assembly Instructions

General Assembly Notes:

• Adult assembly is required.
• Ensure all parts are securely locked before use.
• Check parts for damage, loose joints, or missing pieces before each use.

To Assemble Playard:

1. Unzip the carry bag and remove the playard frame. Undo fastening straps and set the mattress aside.
2. Raise the top rails one by one. Pull up sharply on each rail, ensuring both tubes latch securely and the rail is rigid. Do not pull from the center latch area. The center must be raised while locking rails.
3. Once all four top rails are locked, push down on the center handle. The center mechanism will rotate and lock. Test each top rail by pushing down slightly to confirm it is rigid.
4. Place the mattress on the playard floor with the padded side facing up.
5. Insert the hook and loop fasteners from the mattress underside through the slots in the playard floor. Fasten straps to the underside to secure the mattress. Ensure the center handle remains raised during this process.

Folding the Playard:

1. Operate the wheel brakes by pressing down on the levers. Lift to release.
2. Release the mattress hook and loop fasteners.
3. Rotate the center handle counter-clockwise 90 degrees and raise the center to align with the top rails. Bring legs and wheels together towards the center.
4. Locate the rail latch release on each rail. Squeeze the lever with two hands to release the tubes, then push down. If rails do not release, lift the center of the floor higher. Both tubes must be released for the top rail to fold.
5. Gather the four corners and center of the playard tightly. Wrap the mattress around the frame with the padded side inward.
6. Secure the mattress by feeding fasteners through loops and folding them back.
7. Place the folded playard into the carry bag.

To Assemble Full-Size Bassinet:

1. Ensure the playard is fully assembled and locked before installing the bassinet. Remove the playard mattress.
2. Connect opposing Mattress Support Tubes to the bottom of the bassinet. Ensure tubes are connected securely.
3. Position the bassinet over the assembled playard. Push down firmly on each plastic support clip until all are snapped into place.
4. Place the bassinet mattress into the bassinet with the padded side facing upward.

To Remove Full-Size Bassinet:

• Remove the mattress and canopy. Disconnect the Mattress Support Tubes. Unsnap all clips and lift the bassinet.

Accessory Warnings:

Toy Bar/Mobile/Canopy:

• Possible entanglement injury. Keep out of baby's reach.
• Remove when baby begins to push up on hands and knees (recommended use birth to 5 months).
• Toys are not intended for mouthing. Position toys out of baby's reach.
• ALWAYS attach fasteners tightly and check frequently.
• Do not add extra strings or straps.
• Intended for visual stimulation, not grasping.

Changing Table:

• FALL HAZARD: Serious injuries can occur from falls. Stay within arm's reach of your child. Secure the changing table to the frame according to manufacturer instructions.
• SUFFOCATION HAZARD: Changing tables are not designed for safe sleep. NEVER allow baby to sleep on the changing table. Remove the changing table when not in use.
• Always use the safety belt when the child is on the changing table.
• Discontinue use when child can push up on hands/knees, reaches 25 in. (635 mm), weighs 15 lbs. (6.8 kg), or is 3 months old.
• Do not use if damaged or broken. Adjust belt for a snug fit.

To Assemble Changing Table:

1. Connect the two (2) Long Curved Bars together.
2. Insert the assembled curved bars into the changing table fabric, sliding them into the sleeves.
3. Connect the two (2) Short Bars to each end of the Long Curved Bars, ensuring knobs face down and in the same direction.
4. Insert Connector Knob Prongs into the playard corners. Turn knobs clockwise to lock.
5. Flip the changing table onto the playard. Snap the two (2) buttons on the flap down onto the playard.

To Secure Changing Table to Playard:

1. Locate hook and loop fasteners on the changing table underside and playard side rails.
2. Flip the changing table into its upper position.
3. Secure the changing table to the playard frame by fastening the hook and loop fasteners on the underside of the table to the playard side rails.

To Use Changing Table Restraint System:

1. Place child on the table, ensuring restraints are clear. Bring restraint around child's waist and buckle.
2. Tighten strap for a snug fit, but do not over-tighten. Unscrew buckle to remove.

To Remove Changing Table:

• Flip the changing table outward. Unsnap the fabric flap. Twist connector knobs clockwise to unlock. Remove the changing table and disconnect the short bars from the curved bars. Remove the curved bar from the sleeve.

Parent Organizer Assembly:

• Position each hook so the hooked end faces the organizer's rear. Press hook firmly into the slot until it snaps into place.
• Connect the organizer to the playard by pressing the two (2) connecting clips over a top rail. For use with the full-size bassinet, clip directly onto the bassinet's large clips.

Deluxe Side Pocket Organizer:

• Located on the side of the playard, it features multiple pockets for baby essentials.
• WARNING: Do not place hot liquids or more than 2 lbs. in the organizer. Do not allow children to hang or play with side pockets.

Music Center Assembly:

• The Music Center attaches to the playard's long rail.
• Requires 4 AA batteries. Unscrew battery door, install batteries as shown, then re-secure the door.

Music Center Operation:

• Volume Control: Two buttons control unit volume.
• Music: Press the MUSIC button to play music and change songs.
• Nature Sounds: Press the NATURE button to play nature sounds and change sounds.
• Sleep Music: Press the SLEEP button to play sleep music and change songs.
• Vibration: Press the VIBRATION button once to activate speed; press again for faster speed, press again to reduce speed.
• Night Light: Press the NIGHT LIGHT button to activate the light.

Maintenance and Cleaning

Use only household mild soap and warm water.

?DO NOT USE BLEACH.

?DO NOT MACHINE WASH.

Regulatory Information

FCC Statement: This device complies with Part 15 of the FCC Rules. Operation is subject to two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the responsible party could void the user's authority to operate the equipment. This equipment has been tested and found to comply with Class B digital device limits.

Canada ICES-003 Statement: This Class B digital apparatus complies with Industry Canada Standard ICES-003. Operation is subject to two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received.