Baby Trend Lil Snooze Deluxe Nursery Center

Warranty Information

DO NOT RETURN YOUR PRODUCT TO THE STORE. PLEASE CONTACT BABY TREND FOR REPLACEMENT PARTS, SERVICE AND REPAIR.

The Baby Trend® warranty covers workmanship defects within the first 180 days of purchase. Any product subjected to misuse, abuse, abnormal use, excessive wear and tear, improper assembly, negligence, environmental exposure, alteration, or accident, or with an altered/removed serial number invalidates all claims. Damage to property during installation is the sole responsibility of the end user.

Contact Customer Service: 1 (800) 328-7363, Monday through Friday, 8:00 am - 4:30 pm PST. Return Authorizations are required prior to returning products. Warranty valid only in North America.

Safety Warnings

⚠️ FAILURE TO FOLLOW THESE WARNINGS AND INSTRUCTIONS COULD RESULT IN SERIOUS INJURY OR DEATH.

General Warnings

• NEVER leave infant in product with sides down. Infant may roll into space between pad and loose mesh side, causing suffocation.
• Infants can suffocate: In gaps between a mattress too small or too thick and product sides; on soft bedding. Never add a mattress, pillow, comforter, or padding. Use only the manufacturer-provided mattress. Never use a water mattress.
• Strangulation Hazard: Never place items with a string around a child's neck (e.g., hood strings, pacifier cords). Never suspend strings over playard or attach to toys. Keep product away from windows with cords from blinds or drapes.
• Fall Hazard: Discontinue use when child can climb out, reaches 35 in. (890 mm) or weighs 30 lbs. (13.6 kgs), whichever comes first. When child can pull to standing position, remove bumper pads, large toys, or other objects that could serve as steps.
• Always provide necessary supervision. NEVER leave child unattended.
• To reduce the risk of SIDS, pediatricians recommend placing healthy infants on their back to sleep, unless advised otherwise by a physician.
• Child can become entrapped and die when improvised netting or covers are placed on top of a play yard. Never add such items.
• Never use plastic shipping bags or other plastic film as mattress covers not sold for this purpose, as they can cause suffocation.
• This product is not intended for commercial use.
• If a sheet is used with the pad, use only the one provided by the manufacturer or one specifically designed for the mattress dimensions.
• NEVER leave the bassinet or napper in place when a child is in the playard. Only one child can use the Nursery Center at any time.
• ALWAYS ensure the playard, changing table, and napper are safe by checking regularly that every part is properly and securely in place before use.
• NEVER use this product if there are any loose or missing fasteners, loose joints, broken parts, or torn mesh/fabric. Check before assembly and periodically during use. Contact Baby Trend Customer Service at 1-800-328-7363 for replacement parts, repair, or instructions. NEVER substitute parts.

Changing Table Specific Warnings

• Fall Hazard: Children have suffered serious injuries after falling from changing tables. Falls can happen quickly. Stay within arm's reach.
• Changing tables are not designed for safe sleep. NEVER allow baby to sleep on the changing table.
• NEVER leave the changing table in place when the child is in the bassinet or playard. Always flip the changing table down when not in use.
• To prevent falls and other injuries, always use the safety belt on the changing table. Always stay within arm's reach.
• Discontinue use of the changing table when child begins to push up on hands and knees, reaches 25 in. (635 mm), weighs 15 lbs. (6.8 kgs), or is 4 months old, whichever comes first.
• Do not use if damaged or broken.
• ALWAYS use the restraint system. Adjust belt for a snug fit.

Napper Specific Warnings

• Discontinue use of the napper when child begins to push up on hands and knees, reaches 12 lbs. (5.5 kgs), or is 3 months old, whichever comes first.

Toy Bar Warnings

• Possible entanglement injury. Keep out of baby's reach. Remove toy bar when baby begins to push up on hands and knees.
• Always attach fasteners tightly. Check frequently.
• DO NOT add additional strings or straps.
• DO NOT attach toy bar with child in playard or bassinet.
• Toy bar is not a carry handle.

Parts List

Check the parts list to ensure you have all parts before assembling:

• Playard
• Travel / Storage Bag
• Short Bar with Connector Knob (2)
• Long Curved Bar (2)
• Toy Bar with plush toys*
• Bassinet with metal support tubes
• Changing Table or with Pocket
• Napper Fabric
• Napper Frame Bars (2)
• Napper Support Tubes (2)
• Mattress

*Type and quantity may vary.

Assembly Instructions

To Assemble Playard

ATTENTION: Playard must be fully assembled and securely locked before installing or using other accessories.

1. Unzip bag and remove Playard frame. Undo fasten straps and set mattress aside. DO NOT push center down yet.
2. Top rails must be fully erected before lowering center. Pull up one rail at a time, holding on each side, and pull up sharply. Ensure both tubes latch and rail is rigid. IMPORTANT: Center must be raised while locking rails. If one rail locks but the other doesn't, unlock by squeezing the center release and try again.
3. Once all four top rails are locked, push down on the center handle. The center mechanism automatically locks. IMPORTANT: Test each top rail by pushing down slightly to confirm it is rigid and secure. IMPORTANT: The center handle MUST remain raised while locking side rails; otherwise, they will not lock. If experiencing difficulty, unlock and try again.
4. Place the Mattress on the playard floor with the padded side facing up.
5. Insert hook & loop fasteners on the mattress underside through the floor slots. Fasten them to prevent mattress movement.
6. To operate wheel brakes, press down on levers. To release, lift lever up.

ATTENTION: To use as a bassinet, skip to page 20 for bassinet installation instructions.

Folding Playard

7. Release hook & loop fasteners holding the mattress from underneath the playard floor or bassinet. Set mattress aside. DO NOT unlock top rails yet; center of floor must be raised first.
8. Rotate the center handle counter-clockwise 90 degrees and raise the center as high as the top rails. Gather legs and wheels towards the center.
9. Locate the rail latch release in the center and bottom side of each rail. Squeeze the lever with two hands until the rail releases the two tubes, then push down. NOTE: If top rail(s) do not release completely, DO NOT FORCE! Lift the center higher. Both tubes must be released for the top rail to fold.
10. Gather four corners and center tightly. Wrap mattress around playard frame with padded side inward.
11. Secure hooks and loop fasteners by feeding them through mattress loops and folding them back. Place folded playard into carry bag.

To Assemble Bassinet

ATTENTION: Playard must be fully assembled and securely locked before installing or using the bassinet feature. Remove mattress from playard floor to use inside bassinet.

1. Connect opposing Mattress Support Tubes attached to the bottom of the Bassinet. Ensure tubes are connected before placing mattress.
2. Position the Bassinet over and down into the fully assembled Playard. Secure by pushing down firmly on each plastic support clip until snapped into place.
3. Place the Mattress into the Bassinet with the padded side facing upward.

TO REMOVE BASSINET: Remove Mattress. Remove Canopy. Disconnect Mattress Support Tubes. Unsnap all clips and lift Bassinet.

To Assemble Changing Table

ATTENTION: Playard must be fully assembled and securely locked before installing or using the changing table feature.

1. Connect the two (2) Long Curved Bars together.
2. Insert assembled curved bars into the Changing Table fabric. Slide bars around inside sleeve.
3. Connect the two (2) Short Bars to each end of the Long Curved Bar. Ensure knobs face down and in the same direction.
4. Insert Connector Knob Prongs into holes on playard corners. Turn knobs counter-clockwise to lock.
5. Flip Changing Table over onto Playard.
6. Snap the two (2) buttons on the flap down onto the Playard.
7. Secure the changing table to the playard frame by fastening hook and loop fasteners on the underside of the changing table to the playard frame side rails.
8. TO USE THE CHANGING TABLE RESTRAINT SYSTEM: Place child on table, ensure hands/arms are clear. Bring restraint around child's waist and clip buckle. Tighten strap until snug, but DO NOT OVER TIGHTEN. To remove, unsnap buckle.

ATTENTION: NEVER use changing table if damaged or broken.

To Remove the Changing Table

20. Flip Changing Table to the outside of the Playard. Unsnap fabric flap from Playard. Twist Connector Knobs clockwise to unlock.
21. Remove Changing Table from Playard. Disconnect Short Bars from Curved Bar by pressing snap buttons and pulling apart. Remove Curved Bar from fabric sleeve.

Side Pocket Organizer

WARNING: Do not place hot liquids or more than 2 lbs in the Side Pocket Organizer. For safety, do not allow children to hang or play with side pockets.

The Side Pocket Organizer is conveniently located on the side of your Playard and is equipped with multiple pockets for baby essentials.

To Assemble Napper

ATTENTION: Playard must be fully assembled and securely locked before installing or using the Napper feature.

1. Pull napper fabric flaps up at top and bottom.
2. Insert left napper frame bar into left sleeve, ensuring it's curved upwards. Repeat for the right side.
3. At the bottom of the napper, insert left and right frame bars into support tube ends and slide inward until they lock. Ensure supports are seated and locked.
4. Pull top napper fabric flap down and secure.
5. To attach napper in playard, slide napper into bassinet and push until it locks. NOTE: DO NOT use napper without the bassinet and securing clips.
6. To remove napper, push buttons on support tubes and pull tubes out.

Toy Bar Installation

WARNING: Possible entanglement injury. Keep out of baby's reach. Remove toy bar when baby begins to push up on hands and knees.

• Always attach fasteners tightly. Check frequently.
• DO NOT add additional strings or straps.
• DO NOT attach toy bar with child in playard or bassinet.
• Toy bar is not a carry handle.

Push down on toy bar ends to secure onto the top of the frame.

Maintenance and Cleaning Instructions

• Use only household mild soap and warm water.
• DO NOT USE BLEACH.
• DO NOT MACHINE WASH.