Baby Trend Nursery Center Playard

Product Overview and Parts List

Before assembling the playard, verify that you have all the necessary parts for this model.

Included Parts:

• 1x Playard (fully assembled): Corralito (armado completo) / Parc (entièrement assemblé)
• 1x Mattress: Colchón / Matelas
• 1x Bassinet: Cuna / Couchette
• 4x Metal Support Tubes: Tubos metálicos de soporte / Tubes (2 male, 2 female)
• 1x Changing table: El Cambiador / Table à langer
• 2x Long Curved Bar: Barras curvadas largas / Longue barre courbe
• 2x Short Bar with Connector Knob: Barras cortas con Perillas conectora / Barre courte avec connecteur boutons
• 1x Travel / Storage Bag: Bolsa de viaje y portaobjetos / Sac de transport ou de rangement
• 1x Diaper Stacker: Portapañales / Pochette de diaper
• 1x Mobile Lower Arm: Brazo inferior de móvil / Bras inférieur pour mobile
• 1x Mobile Arm Holder: Soporte de brazo de móvil / Attache pour bras de mobile
• 1x Mobile Upper Curved Arm: Brazo curvo superior de móvil / Bras courbé supérieur pour mobile
• 1x Mobile Tri-shaped Arm: Brazo triple de móvil / Bras tri-forme pour mobile
• 3x Toy Animal: Animalitos de juguete / Jouet

*Toys and mobile may vary.

Important Safety Information

Read all instructions BEFORE assembly and USE of product. KEEP INSTRUCTIONS FOR FUTURE USE.

⚠️ WARNING: NEVER LEAVE INFANT IN PRODUCT WITH SIDES DOWN. Infant may roll into space between pad and loose mesh side causing suffocation.

⚠️ WARNING: INFANTS CAN SUFFOCATE:

• In gaps between a mattress too small or too thick and product sides.
• On soft bedding.

Never add a mattress, pillow, comforter, or padding. Use only the mattress provided by manufacturer. Never use a water mattress with this product.

⚠️ WARNING: Failure to follow these warnings and the instructions could result in serious injury or death.

General Safety Precautions:

• The playard, including side rails, must be fully erected prior to use. Make sure latches are secure.
• Strings can cause strangulation! NEVER place items with a string around a child's neck such as hood strings or pacifier cords. NEVER suspend strings over playard or attach strings to toys.
• Discontinue use of the product when child is able to climb out or has reached the height of 35 in. (890 mm) or weight of 30 lbs. (14 kgs), whichever comes first.
• When child is able to pull to standing position, remove bumper pads, large toys and other objects that could serve as steps for climbing out.
• NEVER place product near a window where cords from blinds or drapes can strangle a child.
• Always provide the supervision necessary for the continued safety of your child. When used for playing, NEVER leave child unattended.
• To reduce the risk of SIDS, pediatricians recommend healthy infants be placed on their back to sleep, unless otherwise advised by your physician.
• Child can become entrapped and die when improvised netting or covers are placed on top of a play yard. Never add such items to confine child in play yard.
• NEVER use this product if there are any loose or missing fasteners, loose joints, broken parts, or torn mesh/fabric. Check before assembly and periodically during use. Contact Baby Trend Customer Service at 1-800-328-7363 for replacement parts, repair or instructions. NEVER substitute parts.
• NEVER leave child in product with sides lowered. Be sure sides are in raised and locked position whenever child is in product.
• NEVER use plastic shipping bags or other plastic film as mattress covers not sold and intended for that purpose. They can cause suffocation.
• This product is not intended for commercial use.

Maintenance and Cleaning

Use only household mild soap and warm water.

• DO NOT USE BLEACH.
• DO NOT MACHINE WASH.

Assembly Instructions

General Assembly Notes

❗ IMPORTANT! To ensure safe operation of your playard, please follow these instructions carefully. Please keep these instructions for future reference.

❗ IMPORTANT! Before assembly and each use, inspect this product for damaged hardware, loose joints, missing parts or sharp edges. NEVER use if any parts are missing or broken.

❗ IMPORTANT! Adult assembly is required.

Assembling the Playard

1. Unzip the bag and remove the Playard frame. Undo the two (2) Fasten straps and set the Mattress aside. DO NOT push the center down yet. Figure 1: Illustration showing the playard frame being removed from its bag.
2. Ensure all four (4) top rails are fully erected before lowering the center. Pull up one rail at a time, holding one hand on each side of the rail and pulling sharply. Do not pull from the middle where the center latch release is located. Make sure both tubes latch in place and each rail is rigid. Figure 2: Illustration showing how to pull up the top rails. IMPORTANT: The handle located in the center of the Playard floor MUST remain raised (Approx. 45.7 cm or 18 inches) while locking the side rails in place. If the center is not raised, the rails will NOT lock. If you experience difficulty and one side of the rail will lock but the other side will not, unlock the rail by squeezing the release in the center and try again. If you still have difficulty, contact Baby Trend Customer Service.
3. Once all four (4) top rails are locked in place, push down on the center handle. The center mechanism will rotate clockwise 90 degrees and automatically lock in place. IMPORTANT: Test each top rail by pushing down slightly to confirm each is rigid and securely in place before use. Figure 3a & 3b: Illustrations showing the center handle being pushed down and testing the rails.
4. Place the Mattress on the floor of the Playard with the padded side facing up. Figure 4: Illustration of mattress placement.
5. Insert Velcro® straps located on the underside of the Mattress through the slots in the floor of each end of the Playard. Fasten the hook and loop straps to the underside of the Playard floor to prevent the Mattress from moving. Figure 5a & 5b: Illustrations showing how to attach the mattress straps.
6. To operate the brakes on the Wheels, press downward on the brake levers. To release, lift upward on the lever. Figure 6: Illustration of brake operation.

Folding the Playard

1. Release the two (2) Velcro® straps holding the Mattress from underneath the Playard floor or the Bassinet and set the mattress aside.
2. Do not unlock top rails yet; the center of the floor must be raised before top rails will unlock.
3. Rotate the center handle counter-clockwise 90 degrees and raise the center as high as the top rails. Gather the Legs and Wheels together towards the center as close as possible so that they nearly touch. Figure 7: Illustration showing the center handle rotation and gathering of legs/wheels.
4. Locate the rail latch release in the center and bottom side of each rail. Squeeze the lever with two hands until the rail releases the two tubes, then push down. NOTE: If the top rail(s) do not release completely, DO NOT FORCE! Lift the center of floor higher. Both tubes must be released for the top rail to fold. Figure 8a & 8b: Illustrations showing the latch release and pushing down.
5. Gather four (4) corners and center all together tightly. Wrap Mattress around Playard frame with padded side facing inward. Secure the two (2) hook and loop straps by feeding them through the loops on the end of the Mattress and folding them back onto themselves. Figure 9: Illustration showing how to wrap the mattress and secure straps.
6. Place folded Playard into carry bag. Figure 10: Illustration of playard in carry bag.

Assembling the Bassinet

ATTENTION: Playard must be fully assembled and securely locked before installing or using the bassinet feature. You will need to remove the mattress from the bottom of the Playard to use inside your Bassinet.

1. Position the Bassinet over and down into the fully assembled Playard. Secure in place by pushing down firmly on each plastic support clip until all are snapped into place. Figure 11: Illustration of bassinet placement.
2. Ensure the tubes are lined up with the holes in the front frame assembly. Insert the assembled Mattress Support Tubes into the loops provided on the bottom of the Bassinet. Figure 12a & 12b: Illustrations showing tube alignment and insertion.
3. Place the Mattress into the Bassinet with the padded side facing upward. Figure 13: Illustration of mattress placement in bassinet.

TO REMOVE BASSINET: Remove Mattress from Bassinet. Remove Canopy. Unsnap all clips and lift Bassinet.

Assembling the Changing Table

ATTENTION: Playard must be fully assembled and securely locked before installing or using the changing table feature.

1. Connect the two (2) Long Curved Bars together.
2. Insert the assembled curved bars into the Changing Table fabric. Slide the Curved Bars around inside the sleeve of the Changing Table.
3. Connect the two (2) Short Bars to each end of the Long Curved Bar. Make sure that the knobs are both facing down and the same direction on each end. Figures 14a-14d: Illustrations showing changing table bar connections.
4. Insert Connector Knob Prongs into holes located on both corners of the Playard. Turn the Connector Knobs counter-clockwise to lock into place. Figures 15a & 15b: Illustrations showing knob insertion and locking.
5. Flip Changing Table over onto Playard. Snap the two (2) buttons on the flap down onto the Playard. Figures 15c & 15d: Illustrations showing flipping and securing the changing table. IMPORTANT: Check that the Changing Table is correctly and securely installed BEFORE each use.

TO SECURE THE CHANGING TABLE TO THE PLAYARD: When the changing table is flipped up into the upper position, it must be secured to the playard frame using the provided velcro straps.

16. Locate the Velcro straps on the bottom of the changing table and on the inside of the side rails of the playard. Figure 16: Illustration showing strap locations.
17. Flip the changing table into its upper position. Figure 17: Illustration of flipping the changing table.
18. Secure the changing table to the playard frame by fastening the Velcro straps on the underside of the changing table to the side rails of the playard frame. Figure 18: Illustration showing securing the changing table.

Using the Changing Table Restraint System

TO USE CHANGING TABLE RESTRAINT SYSTEM:

19. Place child on changing table, make sure hands and arms are clear of the restraint. Bring the restraint around the child's waist and clip the male and female ends of the buckle together. Figure 19a: Illustration of restraint placement.
20. Tighten strap until it fits snug around child's waist. DO NOT OVER TIGHTEN. Figure 19b: Illustration of tightening the strap.
21. To remove, unsnap the buckle. ATTENTION: NEVER use changing table if it is damaged or broken.

TO REMOVE CHANGING TABLE: Flip Changing Table to the outside of the Playard. Unsnap fabric flap of Changing Table from Playard. Twist Connector Knobs clockwise to unlock. Remove Changing Table from Playard and disconnect the Short Bars from the Curved Bar by pressing on the snap buttons and pulling apart. Remove Curved Bar from Changing Table sleeve. Figures 20a & 20b: Illustrations showing changing table removal.

Parent Organizer Assembly

1. Parent Organizer: Position each hook so that the hooked end is facing the rear side of the organizer. Press the hook down firmly into the slot until it snaps into place. Figure 21a: Illustration of hook placement.
2. Diaper Stacker: Skip to step 2.
3. Connect the Parent Organizer/Diaper Stacker to the Playard by sliding the two (2) connecting clips over an open portion of the top rail of the Playard. Figure 21b: Illustration of organizer/stacker attachment. NOTE: The Parent Organizer/Diaper Stacker can only be installed on open sides of the Playard where the connecting clips can easily be attached without interfering with other features.

Mobile Assembly

ATTENTION: A crib mobile is intended for visual stimulation and not to be grasped by the child. If attached to the crib or playpen, remove when baby begins to push up on hands and knees. If so designed, mount on wall or ceiling clearly out of a standing baby's reach. Always attach all provided fasteners (strings, straps, clamps, etc.) tightly to a crib or playpen according to the instructions. Check frequently. DO NOT add additional strings and straps to attach to a crib or playpen. DO NOT attach the Mobile with child in Playard or Bassinet.

1. Insert the Mobile Lower Arm (a) into the Mobile Arm Holder (b) until they lock together. Figure 22: Illustration of lower arm and holder assembly.
2. Insert the Mobile Upper Curved Arm (c) into the Mobile Lower Arm (a, b) until locked together. Figure 23: Illustration of upper arm attachment.
3. Snap the Mobile Tri-shaped Arm (d) onto the end of the Upper Curved Arm (a, b, c). Connect each of the three Toys (e) to the Mobile by threading the string into the slot at the end of each arm. Figure 24: Illustration of tri-shaped arm and toy attachment.
4. Insert the bottom of the Mobile Arm into the frame of the Playard. Figure 25: Illustration of mobile arm insertion into playard frame.

Customer Support

STOP ALTO ARRÊT

If you experience any difficulty in using this product, please contact our customer service department at 1-800-328-7363 Between the hours of 8:00 A.M. and 4:30 P.M. Pacific standard time for assistance. Please have your model number and manufacturing date available when you call. This information can be found on a small sticker on the bottom of the playard.

Convenience through innovation and thoughtful design

Baby Trend, Inc.
1607 S. Campus Ave., Ontario, CA 91761
1-800-328-7363 (8:00am ~ 4:30pm PST)
www.babytrend.com