JLab Studio ANC Wireless Headphones

Introduction

We are thrilled you're using JLab! We are proud of our products and fully identify with them.

Warranty and Support

YOUR WARRANTY

All warranty claims are subject to JLab approval and our sole discretion. To claim warranty, keep your proof of purchase.

CONTACT US

You can contact us via support@jlab.com or visit intl.jlab.com/contact.

REGISTER TODAY

intl.jlab.com/register

Product Updates | Tips & Tricks. Frequently Asked Questions and more.

First Setup: Bluetooth Pairing

1. In your device settings, turn on Bluetooth.

   Diagram shows a mobile device with Bluetooth settings open and the Bluetooth toggle switched ON.

2. When the Studio ANC wireless headphones are off, press and hold the power button for approximately 8 seconds. The light blinking rapidly red and blue indicates Bluetooth device searching.

   Diagram shows headphones with a power button. An indicator light is shown blinking rapidly red and blue.

3. In your device settings, select 'JLab Studio ANC' to connect the device. When the headphones are paired, you will hear 2 beeps and the blue light will start blinking slowly.

   Diagram shows a mobile device displaying a list of Bluetooth devices, with 'JLab Studio ANC' selected. Another diagram shows headphones with a blue indicator light blinking slowly.

Pairing New / Additional Devices

Turn off Bluetooth on the previously paired device and turn on Bluetooth on the new device. For new devices, repeat the FIRST SETUP procedure.

Notes on Bluetooth Pairing

• Bluetooth is a wireless radio technology, meaning objects between the headphones and the connected device affect it. The headphones are designed for use within 10 meters (33 feet) of the connected device, provided there are no large obstacles (walls, etc.) between them.
• Once the headphones are successfully connected, they will remember your device and automatically pair with it every time they are turned on. Only one device can be connected at a time. To pair a different device, first unpair the current device through its Bluetooth settings.
• If the Bluetooth connection is lost for any reason, manually reconnect the Bluetooth device.

Button Functions

• Volume Up: Single click
• Track Forward: Click and hold for more than 2 seconds
• Volume Down: Single click
• Track Backward: Click and hold for more than 2 seconds
• Power On/Off: Click and hold for more than 2 seconds
• Play/Pause / Answer Call / End Call: Single click
• Reject Incoming Call: Click and hold for 1 second
• Activate Siri (iOS) or "OK Google" (Android): Double click
• Bluetooth Pairing: See procedure in FIRST SETUP section
• Active Noise Cancelling (ANC): Click and hold for more than 2 seconds. ON: 2 beeps. OFF: 1 beep.

AUX Input

AUX CABLE INPUT: Connect to the onboard entertainment system or play without battery power.

Diagram shows an AUX cable connecting to the headphones. Another diagram shows an AUX cable connecting to an airplane seat audio jack.

Notes on AUX Input

• ANC function may work when AUX INPUT is connected. Press and hold the ANC button for 2+ seconds to turn on/off.
• AUX INPUT will take priority over Bluetooth connection. Disconnect to return to Bluetooth.
• Button functions for your Bluetooth device will not work when connected via AUX INPUT.
• Volume will depend on your AUX device settings. Adjust accordingly.

Charging

Note: For optimal performance, charge the headphones overnight using the micro USB cable. A full charge takes approximately 3 hours.

Connect the micro USB cable (included) to the headphones and the USB connector to a computer or power adapter (not included). Ensure the USB connection has a power output.

A solid red light indicates the headphones are charging. A solid blue light indicates charging is complete.

Note: The Studio ANC headphones can also be used while charging. After starting to charge, turn on the headphones and connect them to your device.

Diagram shows a micro USB cable plugged into the headphones and a USB-A connector plugged into a power source. Indicator lights are shown: red for charging, blue for fully charged.

Safety Warnings

• Be careful not to get moisture or liquids on the earcups.
• Do not expose the headphones to extreme heat, cold, or humidity.
• Be careful not to drop or expose the headphones to pressure, do not strain the cable by pulling it quickly or applying extreme force; do not bend the cable at sharp angles.
• Earwax may accumulate in the earcups, which can lead to reduced sound quality. To restore sound quality, carefully remove the wax with a cotton swab or other small tool.
• If you start to feel discomfort or pain, try lowering the volume or not using the headphones for a while.
• If you regularly experience discomfort while using this product, stop using it and consult your doctor.
• We recommend treating your headphones like quality sunglasses and storing them in a safe place when not in use.

Resources

Shop Products | Product Warnings | Burn-in Headphones. JLab Store + Burn-in Tool

Download on the App Store

Get it on Google Play

INTL.JLAB.COM