Philips TAV2000FB Portable Radio

User Manual

Important Safety Information

Please read these instructions. Heed all warnings. Follow all instructions. Do not cover any ventilation openings. Do not install near heat sources like radiators, heaters, stoves, or other apparatus (including amplifiers) that produce heat. Keep this product away from direct sunlight, open flames, and heat. Do not expose the product to dripping or splashing water. Place the product on a flat, firm, and stable surface. Do not place any hazardous objects on the product (e.g., objects filled with liquid or lit candles). Never place the product on other electrical equipment. Use only accessories recommended by the manufacturer. Never remove the product cover. All servicing should be done by qualified service personnel. Servicing is required if the product has been damaged in any way, such as damage to the power cord or plug, if liquid has been spilled or objects have fallen into the product, if it has been exposed to rain or moisture, if it does not operate normally, or if it has been dropped. Batteries (battery pack or inserted batteries) should not be exposed to excessive heat such as sunshine, fire, etc. Incorrect battery insertion may cause an explosion risk. Replace the battery only with the same or equivalent type. Batteries may present safety risks during use, storage, or transport under extremely high or low temperatures and low air pressure at high altitudes. Replacing the battery with an incorrect type carries an explosion risk. Do not replace the battery with an incorrect type that could compromise a safeguard (e.g., in the case of certain types of lithium batteries). Insert all batteries correctly. Leaving a battery in an environment with extremely high temperatures or low air pressure may lead to an explosion or leakage of flammable liquid or gas. Batteries contain chemicals and must be disposed of properly. If you suspect a battery has been swallowed or placed inside any part of the body, seek immediate medical attention. When replacing batteries, always keep new and used batteries away from children. After replacing the battery, ensure the battery compartment is securely closed. If the battery compartment cannot be secured, discontinue use. Keep away from children and contact the manufacturer. Do not expose the product to dripping or splashing water. Do not place any hazardous objects on the product. Operate the product safely in an environment with temperatures between 0 and 45 °C. To prevent fire hazard, the device is powered only by an external power supply whose output corresponds to PS1 (with an output capacity of less than 15 W). The power supplied by the charging device must be between a minimum of 5 watts required by the radio device and a maximum of 15 watts necessary to achieve maximum charging speed.

Your Portable Radio

Introduction

Congratulations on your purchase and welcome to Philips! To make the most of the support offered by Philips, register your product at www.philips.com/support.

With this portable radio, you can:

Listen to FM radio and Bluetooth® music.
Set two alarms to ring at different times.

What's in the box

Check the contents and familiarize yourself with them:

Main unit
USB-C charging cable
Quick start guide
Safety leaflet
Warranty

Diagram Description: An image shows the Philips portable radio, a USB-C cable, and small leaflets labeled "Safety information" and "Warranty information".

Note: Images, illustrations, and diagrams in this manual are for reference only. The appearance of the actual product may differ.

Product Description

Diagram Description: Two diagrams show the top and front views of the radio with numbered controls and ports.

1. Favorite Stations (1 or 2): Store or directly access preset station 1 or 2.

2. Snooze/Sleep Timer: Snooze the alarm or set the sleep timer.

3. Menu Navigation: Open menu, display information, go back to previous menu, exit menu.

4. Volume/Selection: Adjust volume, select menu options, open list items, store presets, auto scan, play/pause.

5. Power/Source/Pairing: Switch between FM/Bluetooth sources, pair Bluetooth devices.

6. Power/Standby/Alarm Stop: Turn on/off or switch to standby mode, stop alarm.

7. Program Mode: Activate preset program mode, select preset station.

8. Time/Tuning/Menu Browse: Set time, tune radio stations, browse menu, previous track.

9. Time/Tuning/Menu Browse: Set time, tune radio stations, browse menu, next track.

10. Battery Compartment Cover

11. Headphone Connector

12. Type-C Charging Port

13. FM Antenna

Getting Started

Charging the Built-in Battery

The portable radio is powered by a built-in rechargeable battery.

Note: When the battery is low, a battery icon will appear. Charge the built-in battery as soon as possible.

Connect the supplied USB-C cable to the USB-C port on the portable radio and to a power socket (5V = 2A).

Diagram Description: Shows a USB-C cable connecting to the radio's USB-C port and a power adapter.

A battery charging icon is displayed while charging. A full battery icon is displayed when fully charged.

Note: The device contains built-in lithium batteries. Due to self-discharge, the charging capacity of lithium batteries decreases over time. For optimal battery life, it is recommended to charge the built-in battery to approximately 50% every 6 months if the device is not in use.

Turning On/Off or Switching to Standby Mode

Press the [Power Button] to turn on the device. The radio will switch to the last selected source.
Press the [Power Button] to switch the device to standby mode. The time will be displayed (if set).

Note: If no Bluetooth device is connected for 15 minutes, or if connected but not playing, the radio will automatically switch to standby mode. Press and hold the [Power Button] for three seconds to turn off the device directly in any mode. The display will turn off.

Adjusting Volume

Adjust the volume by turning the knob while listening.

Adjusting Display Brightness

You can select different brightness levels or turn off the display.

Press the [Menu Button] to open the menu.
Turn the [Tuning Knob] or press [Navigation Buttons ◄◄/►►] to select [Display], then press [SELECT Button] to confirm.
Turn the [Tuning Knob] or press [Navigation Buttons ◄◄/►►] to select [Backlight level], then press [SELECT Button] to confirm.
Turn the [Tuning Knob] or press [Navigation Buttons ◄◄/►►] to select the desired brightness level (High, Medium, or Low) on the display, then press [SELECT Button] to confirm.
Press the [Menu Button] to exit the menu.

Displaying the Menu in Standby Mode

When the device is in standby mode, you can open the menu to view control options.

In standby mode, press the [Menu Button] to open the menu.
Turn the [Tuning Knob] or press [Navigation Buttons ◄◄/►►] to select a menu option, then press [SELECT Button] to confirm or open a sub-menu.

[Display]: For adjusting backlight, dim level, or timeout.
[Alarm]: To turn on/off and set alarms 1 or 2.
[Clock]: For setting time synchronization, date/time, time format, and date format.
[System]: For system settings.

If a sub-option is available, repeat step 2.
Press the [Menu Button] to return to the previous menu.

Diagram Description: A menu tree structure showing options like Display, Alarm, Clock, System, with sub-options like Backlight level, Dim level, Timeout, Alarm setup, Time/Date settings, Language, Factory reset, etc.

Setting the Clock

Automatic Clock Setting

If an RDS FM station is tuned, the device may automatically synchronize the time broadcast by the RDS FM station (with CT information).

Press the [Menu Button] to open the menu.
Turn the [Tuning Knob] or press [Navigation Buttons ◄◄/►►] to select [Clock], then press [SELECT Button] to confirm.
Turn the [Tuning Knob] or press [Navigation Buttons ◄◄/►►] to select [Set auto/manual], then press [SELECT Button] to confirm.
Turn the [Tuning Knob] or press [Navigation Buttons ◄◄/►►] to select [Auto(RDS)], then press [SELECT Button] to confirm.
Press the [Menu Button] to return to the previous menu.

Manual Clock Setting

Press the [Menu Button] to open the menu.
Turn the [Tuning Knob] or press [Navigation Buttons ◄◄/►►] to select [Clock], then press [SELECT Button] to confirm.
Turn the [Tuning Knob] or press [Navigation Buttons ◄◄/►►] to select [Set date&time], then press [SELECT Button] to confirm.
Turn the [Tuning Knob] or press [Navigation Buttons ◄◄/►►] to set the hour, then press [SELECT Button] to confirm. The minutes will flash.
Turn the [Tuning Knob] or press [Navigation Buttons ◄◄/►►] to set the minutes, then press [SELECT Button] to confirm.
Turn the [Tuning Knob] or press [Navigation Buttons ◄◄/►►] to select the month, then press [SELECT Button] to confirm.
Turn the [Tuning Knob] or press [Navigation Buttons ◄◄/►►] to select the day, then press [SELECT Button] to confirm.
Turn the [Tuning Knob] or press [Navigation Buttons ◄◄/►►] to select the year, then press [SELECT Button] to confirm.
The time is now set.
Press the [Menu Button] to return to the previous menu.

Setting Time Format

Press the [Menu Button] to open the menu.
Turn the [Tuning Knob] or press [Navigation Buttons ◄◄/►►] to select [Clock], then press [SELECT Button] to confirm.
Turn the [Tuning Knob] or press [Navigation Buttons ◄◄/►►] to select [Set 12H/24H], then press [SELECT Button] to confirm.
Turn the [Tuning Knob] or press [Navigation Buttons ◄◄/►►] to select [12H] or [24H], then press [SELECT Button] to confirm.
Press the [Menu Button] to return to the previous menu.

Setting Date Format

Press the [Menu Button] to open the menu.
Turn the [Tuning Knob] or press [Navigation Buttons ◄◄/►►] to select [Clock], then press [SELECT Button] to confirm.
Turn the [Tuning Knob] or press [Navigation Buttons ◄◄/►►] to select [Set date format], then press [SELECT Button] to confirm.
Turn the [Tuning Knob] or press [Navigation Buttons ◄◄/►►] to select the date format [MM-DD-YYYY], [DD-MM-YYYY], or [YYYY-MM-DD], then press [SELECT Button] to confirm.
Press the [Menu Button] to return to the previous menu.

Clock Style

Press the [Menu Button] to open the menu.
Turn the [Tuning Knob] or press [Navigation Buttons ◄◄/►►] to select [Clock], then press [SELECT Button] to confirm.
Turn the [Tuning Knob] or press [Navigation Buttons ◄◄/►►] to select [Clock style], then press [SELECT Button] to confirm.
Turn the [Tuning Knob] or press [Navigation Buttons ◄◄/►►] to select [Classic analog] or [Normal digital], then press [SELECT Button] to confirm.
Press the [Menu Button] to return to the previous menu.

Setting the Alarm

Setting Alarm Time

Note: Ensure the clock is set correctly.

Press the [Menu Button] to open the menu.
Turn the [Tuning Knob] or press [Navigation Buttons ◄◄/►►] to select [Alarm], then press [SELECT Button] to confirm.
Turn the [Tuning Knob] or press [Navigation Buttons ◄◄/►►] to select [Alarm 1 Setup] or [Alarm 2 Setup], then press [SELECT Button] to confirm.
Turn the [Tuning Knob] or press [Navigation Buttons ◄◄/►►] to set the [Wake up time], then press [SELECT Button] to confirm. The hours will flash.
Turn the [Tuning Knob] or press [Navigation Buttons ◄◄/►►] to set the hour, then press [SELECT Button] to confirm. The minutes will flash.
Turn the [Tuning Knob] or press [Navigation Buttons ◄◄/►►] to set the minutes, then press [SELECT Button] to confirm.
If [Once] is selected for alarm repeat, use [Navigation Buttons ◄◄/►►] and [SELECT Button] to set the alarm date.
Turn the [Tuning Knob] or press [Navigation Buttons ◄◄/►►] to select [Frequency], then press [SELECT Button] to confirm. The alarm repeat cycle will flash.
Turn the [Tuning Knob] or press [Navigation Buttons ◄◄/►►] to select the alarm repeat cycle (Once, Daily, Weekdays, or Weekend), then press [SELECT Button] to confirm.
Turn the [Tuning Knob] or press [Navigation Buttons ◄◄/►►] to select [Source], then press [SELECT Button] to confirm. The alarm source will flash.
Turn the [Tuning Knob] or press [Navigation Buttons ◄◄/►►] to select the alarm source (BUZZER or FM station), then press [SELECT Button] to confirm.

If [FM] is selected as the alarm source, an additional [Source] option will appear in the alarm menu. Use [Navigation Buttons ◄◄/►►] and [SELECT Button] to choose the preset FM station number.

The corresponding alarm icon [?] will be displayed.

Tip: The device will exit the alarm setting mode after 30 seconds of inactivity. If FM is selected as the source but no station is chosen, the BUZZER source will activate automatically. The alarm timeout is 60 minutes if no user action occurs.

Activating/Deactivating Alarm Timer

Press the [Menu Button] to open the menu.
Turn the [Tuning Knob] or press [Navigation Buttons ◄◄/►►] to select [Alarm], then press [SELECT Button] to confirm.
Turn the [Tuning Knob] or press [Navigation Buttons ◄◄/►►] to select [Alarm 1] or [Alarm 2], then press [SELECT Button] to confirm.
Turn the [Tuning Knob] or press [Navigation Buttons ◄◄/►►] to select [On] or [Off], then press [SELECT Button] to confirm activation or deactivation.
Press the [Menu Button] to return to the previous menu.

If an alarm timer is activated, the alarm icon [?] will be displayed. If deactivated, the icon will disappear.

Snooze/Stop Alarm

Snooze Alarm

When the alarm rings, press the [Snooze Button]. The alarm will be snoozed for 10 minutes (default is 10 minutes).

During the snooze period, press [Navigation Buttons ◄◄/►►] to select a different snooze duration (in minutes).

Diagram Description: Shows options for snooze duration: 10, 20, 30, 40, 50, 60 minutes.

Stopping Alarm Sound

When the alarm sounds, press the [Snooze Button] to pause the alarm and enter snooze mode, or press the [Stop Button] to stop the alarm sound. The alarm will stop, but the alarm settings will be retained.

Setting the Sleep Timer

This portable radio can automatically switch to standby mode after a set sleep time.

Turn on the device.
Press the [Snooze Button] to select the sleep time.

Press and hold the [Snooze Button] to cycle through the available sleep times.

Diagram Description: Shows sleep timer options: Off, 15, 30, 45, 60, 90, 120 minutes.

Deactivating Sleep Timer: Repeat the steps above and set the sleep timer to Off.

Listening to FM Radio

Note: Keep the portable radio away from other electronic devices to prevent radio interference. Extend the FM antenna fully and adjust its position for optimal reception.

Automatic Tuning

Turn on the device by pressing the [Power Button].
Press the [Source Button] to select FM mode.
Press and hold the [SCAN Button] for 3 seconds. The radio will automatically tune to the strongest signal station.

Manual Tuning

To tune manually, press the [Tuning Button] to select the frequency. The FM frequency on the display will increase by 0.05 MHz with each press of [Navigation Buttons ◄◄/►►].

Automatic FM Station Search and Storage

Note: Up to 20 FM stations can be stored.

In FM tuner mode, press and hold the [SCAN Button] for three seconds. The display will show [Auto Scanning...]. The radio will automatically search and store all FM stations, then play the first available station.

Manual FM Station Storage

In FM tuner mode, tune to an FM station.
Press and hold the [Favorite Station Button 1 or 2] for three seconds to activate programming mode. The preset list will appear.
Turn the [Tuning Knob] or press [Navigation Buttons ◄◄/►►] to select the preset number.
Press [SELECT Button] to store the preset station.
Repeat steps 1-4 to store more FM stations.

Tip: If you want to remove a preset station and have more than 20 presets, replace it with another station.

Storing and Selecting Favorite Stations

Note: Favorite stations can be stored as direct access buttons 1 and 2.

In FM tuner mode, tune to an FM station.
Press and hold button 1 or 2 for three seconds to store the current station to that position. [Preset 1 or 2 stored] will appear. The preset number and frequency will be displayed.
In FM tuner mode, press button 1 or 2 to directly select the preset station.

Selecting a Preset Station

In FM tuner mode, press the [Favorite Station Button].
Turn the [Tuning Knob] or press [Navigation Buttons ◄◄/►►] to select the preset FM station.

Note: After three seconds, the preset station will be confirmed automatically.

Adjusting Tuning Sensitivity

Press the [Menu Button] to open the FM menu.
Press [SELECT Button] to open the [Scan setting] option.
Turn the [Tuning Knob] or press [Navigation Buttons ◄◄/►►] to select [Strong] (for strong signal stations only) or [All] (for all stations), then press [SELECT Button] to confirm.
Press the [Menu Button] to exit the menu.

Displaying RDS Information

RDS (Radio Data System) is a service that displays additional information about FM stations.

Tune to an RDS FM station.
Press and hold the [Menu Button] for three seconds to display the following information (if available): Station Name, Program Type (e.g., [NEWS], [SPORT], [POP M]), Time, Text, Frequency.

Displaying the Menu in FM Mode

While listening to FM broadcasts, you can open the menu to view control options.

Press the [Menu Button] to open the FM menu.
Turn the [Tuning Knob] or press [Navigation Buttons ◄◄/►►] to select a menu option, then press [SELECT Button] to confirm or open a sub-menu. Options include:

[Scan setting]: To select tuning sensitivity (strong signal or all stations).
[Kitchen timer]: To set the kitchen timer.
[Sleep timer]: To set the sleep timer.
[Display]: To adjust backlight, dim level, or timeout.
[Alarm]: To turn on/off and set alarms.
[Clock]: To set time synchronization, date/time, time format, and date format.
[System]: For system settings.

If a sub-option is available, repeat step 2.
Press the [Menu Button] to return to the previous menu.

Note: The menu will exit if no button is pressed for 30 seconds.

Diagram Description: A menu tree structure for FM mode, similar to the standby mode menu but specific to FM functions.

Listening to Bluetooth® Music

Note: Operating range is approximately 25 meters (82 feet) in open space. Compatibility with all Bluetooth devices is not guaranteed. Obstacles may reduce range. Keep away from other electronic devices that may cause interference. The device will disconnect if it moves out of range.

Connecting Bluetooth®

Press the [Source Button] to select Bluetooth mode. [Not Connected] will be displayed.
On your Bluetooth device, turn on Bluetooth and pair by searching for and selecting [Philips TAV2000FB].
Upon successful connection: You will hear an audible alert. [Connected] will be displayed.

Disconnecting Bluetooth®

Switch to another source on your device.
Disable the Bluetooth function on your device.
Alternatively, press and hold the [Source Button] for three seconds to disconnect the Bluetooth connection. You will hear an audible alert. [Pairing] will be displayed.

To disconnect and go to pairing mode:

Press the [Menu Button] to open the Bluetooth menu.
Press [SELECT Button] to select [Bluetooth pair].
Turn the [Tuning Knob] or press [Navigation Buttons ◄◄/►►] to select [Yes] to disconnect and go to pairing mode, then press [SELECT Button] to confirm. [Pairing] will be displayed.

Deleting Bluetooth® Pairing Records

Press the [Menu Button] to open the Bluetooth menu.
Turn the [Tuning Knob] or press [Navigation Buttons ◄◄/►►] to select [Bluetooth clean], then press [SELECT Button] to confirm.
Turn the [Tuning Knob] or press [Navigation Buttons ◄◄/►►] to select [Yes] to disconnect the current connection, or [No] to keep the connection, then press [SELECT Button] to confirm.
Press the [Menu Button] to exit the menu.

Playing Music

You can use this device to control music playback from your Bluetooth device.

Press [SELECT Button] to pause/resume playback.
Press [Navigation Buttons ◄◄/►►] to skip tracks.
Turn the [Tuning Knob] to adjust volume.

Displaying the Menu in Bluetooth Mode

While listening via Bluetooth, you can open the menu to view control options.

Press the [Menu Button] to open the Bluetooth menu.
Turn the [Tuning Knob] or press [Navigation Buttons ◄◄/►►] to select a menu option, then press [SELECT Button] to confirm or open a sub-menu. Options include:

[Bluetooth pair]: To disconnect Bluetooth and go to pairing mode.
[Bluetooth clean]: To erase Bluetooth pairing records.
[Kitchen timer]: To set the kitchen timer.
[Sleep timer]: To set the sleep timer.
[Display]: To adjust backlight, dim level, or timeout.
[Alarm]: To turn on/off and set alarms.
[Clock]: To set time synchronization, date/time, time format, and date format.
[System]: For system settings.

If a sub-option is available, repeat step 2.
Press the [Menu Button] to return to the previous menu.

Note: The menu will exit if no button is pressed for 30 seconds.

Diagram Description: A menu tree structure for Bluetooth mode, similar to the FM mode menu but specific to Bluetooth functions.

Setting the Kitchen Timer

Note: The device will exit the setting menu after 30 seconds of inactivity.

Turn on the device by pressing the [Power Button].
Press the [Menu Button] to open the menu.
Turn the [Tuning Knob] or press [Navigation Buttons ◄◄/►►] to select [Kitchen timer], then press [SELECT Button] to confirm.
Turn the [Tuning Knob] or press [Navigation Buttons ◄◄/►►] to select [Kitchen timer setup], then press [SELECT Button] to confirm.
Alternatively, press and hold the [Snooze Button] to open the kitchen timer menu. The hour digits will flash.
Turn the [Tuning Knob] or press [Navigation Buttons ◄◄/►►] to set the hour, then press [SELECT Button] to confirm. The minute digits will flash.
Turn the [Tuning Knob] or press [Navigation Buttons ◄◄/►►] to set the minute, then press [SELECT Button] to confirm. The second digits will flash.
Turn the [Tuning Knob] or press [Navigation Buttons ◄◄/►►] to set the second, then press [SELECT Button] to confirm.
Turn the [Tuning Knob] or press [Navigation Buttons ◄◄/►►] to select [On/Off], then press [SELECT Button] to confirm.
Turn the [Tuning Knob] or press [Navigation Buttons ◄◄/►►] to select [On] (to activate) or [Off] (to deactivate), then press [SELECT Button] to confirm.
Press the [Menu Button] to return to the previous menu. The kitchen timer icon [⏰] will be displayed.

Note: The kitchen timer timeout is 60 minutes if no user action occurs.

Stopping Kitchen Timer Sound

When the kitchen timer sounds, press any button to stop the buzzer.

Canceling the Kitchen Timer

To cancel the kitchen timer, press the [Menu Button] to open the menu.
Turn the [Tuning Knob] or press [Navigation Buttons ◄◄/►►] to select [Kitchen timer], then press [SELECT Button] to confirm.
Turn the [Tuning Knob] or press [Navigation Buttons ◄◄/►►] to select [On/Off], then press [SELECT Button] to confirm.
Turn the [Tuning Knob] or press [Navigation Buttons ◄◄/►►] to select [Off], then press [SELECT Button] to confirm.
Press the [Menu Button] to exit the menu.

Note: The kitchen timer can only be canceled when the device is on.

Other Functions

Selecting Menu Language

Press the [Menu Button] to open the menu.
Turn the [Tuning Knob] or press [Navigation Buttons ◄◄/►►] to select [System], then press [SELECT Button] to confirm.
Turn the [Tuning Knob] or press [Navigation Buttons ◄◄/►►] to select [Language], then press [SELECT Button] to confirm.
Turn the [Tuning Knob] or press [Navigation Buttons ◄◄/►►] to select the desired menu language, then press [SELECT Button] to confirm. Available languages include English, Deutsch, Italiano, Français, Norsk, Dansk, Nederlands, Svenska, Español, Suomi, Polski.
Press the [Menu Button] to return to the previous menu.

Listening via Headphones

Connect headphones to the headphone jack on the back of the device.

Resetting to Factory Settings

Press the [Menu Button] to open the menu.
Turn the [Tuning Knob] or press [Navigation Buttons ◄◄/►►] to select [System], then press [SELECT Button] to confirm.
Turn the [Tuning Knob] or press [Navigation Buttons ◄◄/►►] to select [Factory reset], then press [SELECT Button] to confirm.
Turn the [Tuning Knob] or press [Navigation Buttons ◄◄/►►] to select [Yes] (to reset all radio settings to default), then press [SELECT Button] to confirm. [Restarting...] will be displayed.

Technical Specifications

Note: Product information is subject to change without prior notice.

Amplifier

Rated output power: 5 W RMS (THD 10%)

Tuner

Tuning range (FM): 87.5 to 108 MHz
Tuning step: 50 kHz
Sensitivity: Mono, signal-to-noise ratio 26 dB: < 22 dBf
Total harmonic distortion: < 10%
Signal-to-noise ratio: > 50 dBA

Bluetooth

Bluetooth version: V5.4
Bluetooth frequency band: 2.4 ~ 2.48 GHz
Max. E.I.R.P.: 5.37 dBm
Bluetooth range: 25 m (in open space)

General Information

USB Port: 5V = 2A
Lithium battery: 3.65 V/2600 mAh
Dimensions (W x H x D): 190 x 111.6 x 91.5 mm
Weight (main unit): 555 g

Troubleshooting

Warning

Never remove the product cover.

To preserve the warranty, never attempt to repair the product yourself. If you encounter problems while using this device, check the following points before contacting service. If the problem is not resolved, visit www.philips.com/support. When contacting Philips, have the device nearby and its model and serial number available.

No Power

Check if the portable radio is fully charged.
Check if the portable radio's USB connector is properly connected.

No Sound

Adjust the volume on the portable radio.
Adjust the volume of the connected device.
Ensure your Bluetooth device is within operating range.

Unit Unresponsive

Restart the portable radio.

Poor Radio Reception

Keep the portable radio away from other electronic devices to prevent interference.
Extend the FM antenna fully and adjust its position.

Alarm Not Working

Set the clock/alarm correctly.

Clearing Clock/Alarm Settings

Reset the clock/alarm.
Insert backup batteries.

Poor Sound Quality After Connecting to a Bluetooth Device

Bluetooth signal reception is poor. Move the device closer to this speaker or remove any obstacles between them.

Cannot Find [Philips TAV2000FB] on Bluetooth Device

Press and hold the [Source Button] for three seconds to enter Bluetooth pairing mode, then try again.

Cannot Connect to Bluetooth Device

Bluetooth function is not enabled on the device. Refer to the device's manual for instructions.
This portable radio is not in pairing mode.
This portable radio is already connected to another device with Bluetooth enabled. Disconnect the device and try again.

Battery Cannot Be Charged Properly or Discharges Too Quickly

Replace batteries.
Open the battery compartment cover on the back of the device and remove the original battery.
Insert a battery of the same type (not supplied).
Secure the battery compartment cover.

Technical Specifications of the Rechargeable Lithium-ion Battery:

Model: 1INR19/66, TACR5001BA
Rated capacity: 3.65 V, 2600 mAh, 9.49 Wh
Max. charging voltage: 4.2 V
TP Vision Europe B.V. Prins Bernhardplein 200, 1097 JB Amsterdam, The Netherlands.
To purchase an additional battery, find more information at https://www.philips.com/support.

Notes

Compliance with Regulations

Any changes or modifications not expressly approved by MMD Hong Kong Holding Limited may void the user's authority to operate the product.

TP Vision Europe B.V. hereby declares that this product is in compliance with the essential requirements and other relevant provisions of Directive RED 2014/53/EU and UK Radio Equipment Regulations SI 2017 No 1206. The Declaration of Conformity can be found at www.philips.com/support.

[CE Mark] This product complies with the requirements of the European Community for radio interference.

[Recycling Symbol] This symbol means the product must not be disposed of as household waste and should be taken to an appropriate collection facility for recycling. Follow local regulations and never dispose of the product or batteries with household waste. Proper disposal helps prevent negative impacts on the environment and human health.

[Battery Recycling Symbol] This symbol means the product contains batteries covered by European Regulation (EU) 2023/1542, which cannot be disposed of with normal household waste. Inform yourself about the local separate collection system for electrical and electronic products and batteries. Follow local regulations and never dispose of the product or batteries with household waste. Proper disposal helps prevent negative impacts on the environment and human health.

Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by MMD Hong Kong Holding Limited is under license. Other trademarks and trade names are those of their respective owners.

	Philips Tragbares Radio TAV2000FB: Bedienungsanleitung & Handbuch Umfassende Bedienungsanleitung für das Philips Tragbares Radio TAV2000FB. Enthält Anleitungen zur Einrichtung, Bedienung von FM-Radio und Bluetooth, Einstellung von Weckalarmen und Sleeptimer, Nutzung des Kurzzeitmessers sowie Fehlerbehebung und technische Daten.
	Philips TAV2000FB Portable Radio User Manual Comprehensive user manual for the Philips TAV2000FB portable radio, detailing setup, FM radio operation, Bluetooth connectivity, alarm and timer functions, specifications, and troubleshooting.
	Philips TAV2000FB Portable Radio User Manual - FM, Bluetooth, Alarm, Clock Comprehensive user manual for the Philips TAV2000FB portable radio. This guide provides detailed instructions on setting up, using FM radio, connecting via Bluetooth, managing alarms and timers, and troubleshooting common issues.
	Philips TAV2000FB Portable Radio User Manual Comprehensive user manual for the Philips TAV2000FB portable radio, covering setup, FM radio, Bluetooth audio, alarms, timers, troubleshooting, and technical specifications. Learn how to charge, power on, tune into FM stations, connect Bluetooth devices, set alarms, use the kitchen timer, and resolve common issues.
	Philips TAV2000FB Portable Radio User Manual This user manual provides comprehensive instructions for the Philips TAV2000FB portable radio, covering setup, operation, FM radio tuning, Bluetooth connectivity, alarm and timer functions, troubleshooting, specifications, and compliance information.
	Philips TAV2000FB Portable Radio User Manual Comprehensive user manual for the Philips TAV2000FB portable radio. Learn how to set up, operate, and troubleshoot your device, including features like FM radio, Bluetooth music playback, alarm settings, and clock functions.
	Philips TAV2000FB Portable Radio User Manual Comprehensive user manual for the Philips TAV2000FB portable radio, covering setup, operation of FM radio and Bluetooth, alarm functions, timers, troubleshooting, and product specifications.
	Philips TAV2000DB Portable Radio User Manual - DAB/FM/Bluetooth Comprehensive user manual for the Philips TAV2000DB portable radio. Learn how to set up, operate, and troubleshoot your DAB/FM radio with Bluetooth connectivity, including features like alarms, timers, and menu navigation.