Tribesigns Assembly Instructions

Contact Us

We're here to help you.

Email: support@tribesigns.com

Phone: 1-424-220-6888 (Contact us from 7 AM to 8 PM EST, Monday to Friday)

Your satisfaction is our top priority. If you encounter any issues with this product, such as missing or damaged parts, please retain the original packaging and take photos of the packaging and the product, then contact Tribesigns as soon as possible.

Warm Tips

1. Carefully read these instructions and keep them for future reference.
2. Check the parts list and confirm everything's there before starting assembly.
3. When assembling, put all parts on a soft, smooth surface like a carpet to avoid scratches.
4. Don't fully tighten screws until all parts are confirmed in place to avoid misalignment.

How to Get the Assembly Video

Step 1: Scan the QR code for the installation video.

Step 2: Search YouTube with the Model No. (HOGA-SL0041) on the bottom left corner of the title page.

Assembly Recommendations

We recommend using hand tools for assembly. If an electric screwdriver is used, reduce power and torque to avoid damage to the product. [!] Avoid scratches: This furniture should be assembled on a soft surface, such as a rug.

Parts List

Part 1: Top Panel (1 pc)

Part 2: Left Side Panel (1 pc)

Part 3: Right Side Panel (1 pc)

Part 4: Back Panel (1 pc)

Part 5: Shelf (1 pc)

Part 6: Support Bar (1 pc)

Part 7: Support Bar (1 pc)

Part 8: Support Bar (1 pc)

Part 9: Drawer Front Panel (1 pc)

Part 10: Drawer Side Panel (1 pc)

Part 11: Drawer Side Panel (1 pc)

Part 12: Drawer Bottom Panel (1 pc)

Part 13: Support Bar (1 pc)

Part 14: Support Bar (1 pc)

Part 15: Drawer Side Panel (1 pc)

Part 16: Drawer Back Panel (1 pc)

Part 17: Drawer Slide (4 pcs)

Part 18: Drawer Slide (2 pcs)

Part 19: Drawer Bottom Panel (1 pc)

Part 20: Drawer Front Panel (1 pc)

Part 21: Support Bracket (2 pcs)

Part 22: Support Bracket (2 pcs)

Part 23: Back Panel (2 pcs)

Part 24: Drawer Bottom Panel (1 pc)

Part 25: Drawer Side Panel (1 pc)

Part 26: Drawer Slide (6 pcs)

Part 27: Support Bar (2 pcs)

Part 28: Back Panel (2 pcs)

Part 29: Drawer Front Panel (1 pc)

Part 30: Support Bar (1 pc)

Part 31: Drawer Bottom Panel (1 pc)

Part 32: Base Panel (1 pc)

Part 33: Base Panel (1 pc)

Part 34: Support Bracket (4 pcs)

Hardware List

A: M6x40mm Screws (75 pcs)

B: Cam Locks (75 pcs)

C: Cam Dowels (43 pcs)

D: M6x25mm Screws (13 pcs)

E: Ø5x40mm Screws (9 pcs)

F: M4 Screws (1 pc)

G: M3x65x30mm Screws (1 pc)

H: M4x15 Screws (5 pcs)

I: M4x15 Screws (11 pcs)

J: Brackets (23 pcs)

K: Ø3.5x14mm Screws (93 pcs)

L: Ø3x18mm Screws (23 pcs)

M: Drawer Slides (9 pcs)

N: Ø14x4mm Screws (9 pcs)

O: Screws (4 pcs)

P: 46x16x13mm Screws (2 pcs)

Q: Ø3.5x12mm Screws (4 pcs)

R: 290mm Screws (6 pcs)

Assembly Steps

Step 1-2: Installation of Cams and Pins

Align the plastic part with the mounting hole and press it in. If you can't press it in, loosen the screw counter clockwise or completely remove the screw from the plastic part and try again.

Step 3-4:

After pressing the plastic part into place, use a screwdriver to tighten the screw clockwise. Screw the pin into the hole. Set the cams correctly by aligning the head of the cams with the lock pins. Lock the cam by turning the cam head with a screwdriver until it is tightened. Please do not use an electric screwdriver to assemble the unit.

Step 1: Splitting Component R

Pull apart component "R" to each side, and then gently push up the lever of component "R-2".

Step 2: Splitting Component R-1 and R-2

Split component "R-1" and "R-2".

Step 1: Attaching Screws (A) to Panels

Attach screws (A) to panels 1, 2, 3, 9, and 12 as shown in the diagram.

Step 2: Attaching Screws (A) to Panels

Attach screws (A) to panels 15, 16, 10, 11, 25, 24, 29, and 13 as shown in the diagram.

Step 3: Assembling with Cam Locks and Dowels

Use cam locks (B) and cam dowels (C) to assemble panels 12, 13, 9, 10, and 11 as shown.

Step 4: Attaching Drawer Slides (R-1)

Attach drawer slides (R-1) to panels 9 and 12 using screws (K).

Step 5: Attaching Drawer Slides (R-1)

Attach drawer slides (R-1) to panels 4, 5, 15, and 16 using screws (K).

Step 6: Assembling the Drawer Box

Assemble the drawer box using parts 16, 17, 12, 20, and drawer slides (B, C) as shown.

Step 7: Attaching Drawer Slides

Attach drawer slides to panels 12, 13, 21, and 22 using screws (K).

Step 8: Attaching Drawer Slides

Attach drawer slides to panels 12 and 16 using screws (N).

Step 9: Attaching Support Brackets

Attach support brackets (23) using screws (D) and (F).

Step 10: Assembling the Drawer Unit

Assemble the drawer unit using parts 3, 9, and drawer slides (B, C) as shown.

Step 11: Assembling the Drawer Unit

Assemble the drawer unit using parts 9, 15, 17, 19, and drawer slides (B, C) as shown.

Step 12: Attaching Drawer Slides

Attach drawer slides to panels 9 and 15 using screws (K).

Step 13: Attaching Support Brackets

Attach support brackets (23) using screws (D) and (F).

Step 14: Assembling the Drawer Unit

Assemble the drawer unit using parts 2 and 9 and drawer slides (B, C) as shown.

Step 15: Attaching Support Bars

Attach support bars (6, 7, 5) to panels 4 using screws (E) and (F).

Step 16: Attaching Drawer Slides

Attach drawer slides to panel 3 using screws (B) and (F).

Step 17: Assembling the Drawer Unit

Assemble the drawer unit using parts 1 and 9 and drawer slides (B, C) as shown.

Step 18: Assembling the Drawer Unit

Assemble the drawer unit using parts 1, 2, 3, and drawer slides (D, F, C) as shown.

Step 19: Attaching Drawer Slides

Attach drawer slides (26) to panels 26 and 27 using screws (B).

Step 20: Assembling the Drawer Unit

Assemble the drawer unit using parts 24, 25, and drawer slides (H, I, B) as shown.

Step 21: Attaching Drawer Slides (R-2)

Attach drawer slides (R-2) to drawers 24 and 25 using screws (K).

Step 22: Assembling the Drawer Unit

Assemble the drawer unit using parts 26, 30, 31, and drawer slides (B) as shown.

Step 23: Assembling the Drawer Unit

Assemble the drawer unit using parts 29 and drawer slides (H, I, B) as shown.

Step 24: Attaching Drawer Slides (R-2)

Attach drawer slides (R-2) to drawer 29 using screws (K).

Step 25: Attaching Brackets

Attach brackets (J, L) to the desk as shown.

Step 26: Attaching Brackets

Attach brackets (K, P) to the desk as shown.

Step 27: Installing Drawer Slides

Before installation, slide the inner iron pieces of #R-1 to the outermost side. Then align it with #R-2 and gently push it inward to complete the slide installation.

Step 28: Attaching Drawer Slides

Attach drawer slides (M) to parts 18 and 19 as shown.

Step 29: Attaching Hardware

Attach hardware (K, H, I, O) to base panels 32 and 33 as shown.

Step 30: Attaching Hardware

Attach hardware (P, Q) to base panel 32 as shown.

Step 31: Attaching Drawer Slides

Attach drawer slides (K) to the desk as shown.

Step 32: Final Assembly

The computer table is now fully assembled.

Follow Tribesigns

Follow Tribesigns on social media:

[Facebook icon] Facebook

[Instagram icon] Instagram

[Pinterest icon] Pinterest

[Twitter icon] Twitter

[YouTube icon] YouTube

[TikTok icon] TikTok

[WhatsApp icon] WhatsApp