Assembly Instructions
Model No. Table/Long Table: HOGA-F1993/F2101/F2168, HOGA-F2250/F2251
Contact Us
We're here to help you.
✉️ support@yuzhouint.com
? 1-424-206-5666
Contact us from 8 AM to 8 PM EST, Monday to Friday.
Your satisfaction is our top priority. If you encounter any issues with this product, such as missing or damaged parts, please contact us as soon as possible. Please retain the original packaging and take photos of the packaging and the product.
Warm Tips
- Carefully read these instructions and keep them for future reference.
- Check the parts list and confirm everything's there before starting assembly.
- When assembling, put all parts on a soft, smooth surface like a carpet to avoid scratches.
- Do not fully tighten screws until all parts are confirmed in place to avoid misalignment.
Assembly Recommendations
We recommend using hand tools for assembly. If an electric screwdriver is used, reduce power and torque to avoid damage to the product.
AVOID SCRATCHES: In order to avoid scratching, this furniture should be assembled on a soft surface, such as a rug.
[❌ symbol for incorrect assembly on hard surface] [✔️ symbol for correct assembly on soft surface]
Installation of Cams and Pins
Read each step carefully before starting. Each step of instruction should be performed in the correct order. If these steps are not followed in sequence, assembly difficulties may occur.
Instructions for Cams and Pins: Screw the pin into the hole. Set the cams correctly by aligning the head of the cams with the lock pins. Lock the cam by turning the cam head with a screwdriver until it is tightened. Please do not use an electric screwdriver to assemble the unit.
Step 1: Insert cam pin (A) into the pre-drilled hole.
Step 2: Insert cam lock (B) into the larger hole, ensuring the arrow points towards the cam pin.
Step 3: Turn the cam lock clockwise with a screwdriver until it is tight, securing the connection.
Parts List
Part 1
(2 pcs)
Part 2
(2 pcs)
Part 3
(2 pcs)
Part 4
(2 pcs)
Part 5
(2 pcs)
Part 6
(1 pc)
Part 7
(4 pcs)
Part 8
(4 pcs)
Hardware List
A: Ø6x35mm
(24+1 pcs)
B: Ø15x12mm
(24+1 pcs)
C: Ø8x30mm
(26+1 pcs)
D: Ø7x40mm
(16+1 pcs)
E: M6x12mm
(4+1 pcs)
F: M6x30mm
(14+1 pcs)
G: M6x40mm
(18+1 pcs)
H: M6x45mm
(2+1 pcs)
I: Wooden Dowel
(8 pcs)
J: Screwdriver
(1 pc)
K: Allen Wrench
(1 pc)
Assembly Steps
- Step 1: Attach two Part 1 pieces using 2 pcs of Hardware C (Ø8x30mm).
- Step 2: Attach two Part 2 pieces to the assembled Part 1 pieces using 8 pcs of Hardware C (Ø8x30mm).
- Step 3: Assemble the frame by connecting Part 5 and Part 6 using 2 pcs of Hardware H (M6x45mm).
- Step 4: Attach Part 4 to the frame using 4 pcs of Hardware E (M6x12mm).
- Step 5: Attach the assembled frame to the table top (Parts 1 and 2) using 18 pcs of Hardware G (M6x40mm).
- Step 6: Attach Part 8 to Part 7 using 24 pcs of Hardware A (Ø6x35mm) for each leg assembly (repeat 4 times).
- Step 7: Assemble the leg structures. Connect Part 7 and Part 8 using Hardware B (Ø15x12mm) and Hardware C (Ø8x30mm) as shown in the diagram. Repeat for all leg components (X2).
- Step 8: Assemble the leg structures. Connect Part 7 and Part 8 using Hardware B (Ø15x12mm) and Hardware C (Ø8x30mm) as shown in the diagram. Repeat for all leg components (X2).
- Step 9: Attach the leg assemblies to the table frame. Use Hardware B (Ø15x12mm) and Hardware C (Ø8x30mm) as indicated. Repeat for both leg assemblies (X2).
- Step 10: Attach the leg assemblies to the underside of the table top (Parts 1 and 2) using Hardware D (Ø7x40mm). Repeat for both leg assemblies (X2).
- Step 11: Secure the leg assemblies to the table top and frame using Hardware F (M6x30mm).
- Step 12: Insert wooden dowels (I) into the designated holes to reinforce the structure.
Final Assembly: The completed table will have a rectangular top supported by two sturdy leg structures.
Thank you for your support!
