Tribesigns Assembly Instructions
Office Table
Model No. HOGA-JW0890
Website: www.tribesigns.com
Assembly Recommendations
We recommend using hand tools for assembly.
Caution: If an electric screwdriver is used, reduce power and torque to avoid damage to the product.
Preparation Tips
- Carefully read these instructions and keep them for future reference.
- Check the parts list and confirm everything's there before starting assembly.
- When assembling, put all parts on a soft, smooth surface like a carpet to avoid scratches.
- Don't fully tighten screws until all parts are confirmed in place to avoid misalignment.
Contact Us
Your satisfaction is our top priority. If you encounter any issues with this product, such as missing or damaged parts, please retain the original packaging and take photos of the packaging and the product, then contact Tribesigns as soon as possible.
Email: support@tribesigns.com
Phone: 1-424-220-6888 (Contact us anytime except 12:00 AM to 8:00 AM EST)
How to Get the Assembly Video
To find the assembly video, search on YouTube using the Model No. HOGA-JW0890, which is located on the bottom left corner of the title page.
Parts List
- Part 1: Table Top Panel - 2 pcs
- Part 2: Base Support Panel - 1 pc
- Part 3: Base Support Panel - 1 pc
- Part 4: Side Support Panel - 1 pc
- Part 5: Bottom Panel - 1 pc
- Part 6: Vertical Support Panel - 1 pc
- Part 7: Middle Support Panel - 1 pc
- Part 8: Back Panel - 2 pcs
- Part 9: Side Panel - 2 pcs
- Part 10: Connecting Plate - 2 pcs
Hardware List
- Hardware A: M3.5X14MM Screw - 16 pcs
- Hardware B: M6X44MM Screw - 16 pcs
- Hardware C: M6X25MM Screw - 16 pcs
- Hardware D: M6X40MM Screw - 20 pcs
- Hardware E: Φ8X30 K30MM Fitting - 20 pcs
- Hardware F: M6X25MM Screw - 19 pcs
- Hardware G: Allen Wrench - 1 pc
Assembly Steps
Step 1
Attach parts 9 and 5 to the base structure. Use hardware D (4 pcs), E (4 pcs), and F (4 pcs).
Step 2
Attach part 4 and parts 9 to the base structure. Use hardware D (4 pcs), E (4 pcs), and F (4 pcs).
Step 3
Attach part 8 to part 7. Use hardware D (3 pcs), E (3 pcs), and F (2 pcs).
Step 4
Attach part 8 to part 7. Use hardware D (3 pcs), E (3 pcs), and F (2 pcs).
Step 5
Attach part 6 to part 8. Use hardware D (6 pcs), E (6 pcs), and F (4 pcs).
Step 6
Insert part 4 into the assembled structure (part 6). An arrow indicates the direction of insertion.
Step 7
Attach part 5 to the assembled structure using hardware B (4 pcs).
Step 8
Attach part 2 to the base structure using hardware A (8 pcs).
Step 9
Attach part 3 to the base structure using hardware A (8 pcs).
Step 10
Connect two parts 1 together using hardware F (3 pcs).
Step 11
Attach parts 10 to parts 1 using hardware C (16 pcs).
Step 12
Attach the assembled structure (parts 1, 2, 4, 6, 8, 9, 10) to the base (parts 1, 3) using hardware B (12 pcs).
