Tribesigns L-Shaped Desk Assembly Instructions

Introduction

Thank you for purchasing the Tribesigns L-Shaped Desk. Please read these instructions carefully and keep them for future reference. Ensure all parts are present before assembly. If any parts are missing or damaged, please contact Tribesigns customer service before proceeding.

Assembly Tips:

• Assemble on a soft, clean surface like a carpet to prevent scratches.
• Do not fully tighten screws until all parts are in place to avoid misalignment.
• When using an electric screwdriver, reduce power and torque to prevent damaging the furniture.

Desk Styles

Parts & Hardware List

Parts List

Hardware List

Assembly Steps

1. Step 1

   Style 1 & Style 2: Attach support bars (4, 5, 6) to leg frames (2, 3) using M6x45mm screws (B). Pre-drill at 70%.

   Diagram showing attachment of support bars to leg frames.

2. Step 2

   Style 1 & Style 2: Attach remaining support bars (7, 8, 9) to the assembled leg frames using M6x12mm screws (A), M6x45mm screws (B), and M6 nuts (D). Pre-drill at 70%.

   Diagram showing attachment of additional support bars and hardware.

3. Step 3

   Style 1 & Style 2: Secure the desk tops (1) to the assembled frame using M6x55mm screws (C) and screws (E). Screw down to 100%.

   Diagram showing the attachment of desk tops to the frame.

4. Step 4

   Style 1 & Style 2: Final assembly check. Ensure all parts are securely fastened.

   Diagram showing the completed desk in both styles.

Customer Support

If you encounter any issues with your Tribesigns L-Shaped Desk, such as missing or damaged parts, please do not return the item. Contact our customer service team for assistance.

Follow Tribesigns: