RENOGY ONE Core

Before Getting Started

This quick guide provides essential operation and maintenance instructions for the Renogy ONE Core (referred to as Core). The Renogy ONE Core is available in two models: RSHGWSN-W02W-G1 (without CAN communication) and RSHGWSN-W02W-G2 (with CAN communication).

Read this quick guide thoroughly before operation and keep it for future reference. Failure to follow the instructions or precautions can lead to electrical shock, serious injury, or death, and may damage the Renogy ONE Core, rendering it inoperable.

For the full online manual, scan the QR codes provided (QR codes are not displayed here).

What's In the Box?

• Renogy ONE Core x 1
• Quick Guide x 1
• Mounting Screws x 4 (1 extra)
• Power Cable (5m) x 1

Get to Know RENOGY ONE Core

The Renogy ONE Core features:

• Mounting Holes: For securing the device.
• On/Off Button: For powering the device on/off.
• Communication Port: For connecting communication cables.
• Bubble Level: Aids in ensuring the device is mounted level.
• Power Port: For connecting the power supply.
• Type-C Port: Alternative power input.

Installation Site and Environment

Suitable Installation Locations: The device can be installed in various locations within an RV, typically mounted vertically to the RV floor. Ensure the screen is oriented towards the front, rear, left, or right side for the RV leveling function.

Environmental Conditions:

• Altitude: Up to 5000m (16404 ft)
• Temperature: -4°F to 158°F (-20°C to 70°C)
• Humidity: 0% to 95%

Environmental Icons:

• ?KEEP DRY
• ?FRAGILE
• ?INDOOR

Required Tools

Tools are only required for flush mounting on a wall.

• Phillips Screwdriver (#1)
• Insulation Tape
• Skill Saw
• Impact Drill with Hole Saw (2.17in / 55mm)

Step 1 (A): Place Renogy ONE Core on a Table

The package box is designed to be environmentally friendly and can be used as a bracket to hold the Core when wall installation is not required.

Instructions:

1. Prepare the package box.
2. Insert the Core into the prepared section of the box.
3. The Core is now held securely.

Step 1 (B): Mount Renogy ONE Core on a Wall

Instructions:

1. Use the provided mounting template (tear off and paste to the desired location) or another piece of paper as a template. The installation hole size is 2.17 in x 2.17 in (55 mm x 55 mm).
2. Align the template on the wall and mark the drilling points.
3. Drill holes at the marked points.
4. Attach the mounting bracket to the wall using the mounting screws. Ensure it is level using the bubble level.
5. Connect the power cable and communication cable (if applicable) to the back of the Core.
6. Align the Core with the bracket and slide it into place until it clicks.
7. Ensure the device is securely mounted.

Diagrams illustrate using the template, drilling, attaching the bracket, connecting cables, and snapping the Core into place.

Step 2: Connect Renogy ONE Core to a Power Supply

Connect the Renogy ONE Core to a power supply using either the included power cable or an optional Type-C cable.

Installed on a Wall

• Using Power Cable: Connect the included power cable to the Power Port on the Core and to a DC power source (8V-32V). Ensure correct polarity: connect the negative terminal first, then the positive.
• Using Type-C Cable (Optional): Connect a 5V DC Type-C cable to the Type-C Port on the Core.

Installed on a Table

• Using Power Cable: Connect the included power cable to the Power Port on the Core and to a DC power source (8V-32V). Ensure correct polarity: connect the negative terminal first, then the positive.
• Using Type-C Cable (Optional): Connect a 5V DC Type-C cable to the Type-C Port on the Core.

Step 3: Install a Communication Cable (Optional)

For detailed instructions, refer to the Renogy ONE Core User Manual by scanning the QR code in the guide (QR code not displayed).

Connect the Communication Cable (max length: 19.6 ft / 6 m) to the Communication Port on the Core and to compatible devices (e.g., RS-485 or CAN for RSHGWSN-W02W-G2).

Step 4: Power On/Off

Long press the On/Off Button for 5 seconds to power the Core on or off.

Step 5: Pairing with DC Home

For initial startup, follow the startup wizard on the Core to pair it with the DC Home app. Alternatively, navigate to > System > Pair with App on the device.

Diagrams show the device interface for pairing and scanning a QR code with a smartphone.

Step 6: Add Devices

The Renogy ONE Core can wirelessly connect to Renogy Bluetooth, Bluetooth mesh, and Zigbee devices concurrently.

Process:

1. On the Renogy ONE Core, select "Add Devices".
2. The device scans for nearby Renogy devices (Controllers, Batteries, Smart Plugs, Inverters, Sensors, etc.).
3. Select devices to add and confirm. The Core can also connect to the Internet.

Diagrams illustrate the device interface for adding devices and the types of Renogy devices that can be connected.

RV Leveling

The Renogy ONE Core features an RV leveling function.

Calibration: RV leveling calibration is required each time the installation site for the Core is changed.

Diagrams show the RV leveling interface on the Core and orientation selection.

Important Safety Instructions

• Keep Renogy ONE Core out of the reach of children.
• Dispose of Renogy ONE Core according to local, state, and federal laws and regulations, using designated recycling channels. Do not dispose of as household waste.
• Do not expose Renogy ONE Core to flammable or harsh chemicals or vapors.
• There are no serviceable parts inside. Do not open, dismantle, repair, tamper with, or modify the device.
• Confirm the polarities of connected devices before powering the Renogy ONE Core. Reverse polarity contact can cause damage and void the warranty.
• Ensure the connected DC power supply is rated between 8V to 32V. Exceeding this range can cause power-on failure or permanent damage.
• An extended power cable can be used if needed. Refer to the Renogy ONE Core User Manual for details.

Renogy Support

To discuss inaccuracies or omissions in this quick guide or user manual, visit or contact Renogy:

renogy.com/support/downloads

contentservice@renogy.com

A questionnaire investigation QR code is present but not displayed here.

To explore more possibilities of solar systems, visit the Renogy Learning Center:

renogy.com/learning-center

Technical Support

For technical questions about your product in the U.S., contact Renogy technical support:

renogy.com/contact-us | 1(909)2877111

For technical support outside the U.S., visit local websites:

• Canada: ca.renogy.com
• Australia: au.renogy.com
• South Korea: kr.renogy.com
• United Kingdom: uk.renogy.com
• China: www.renogy.cn
• Japan: jp.renogy.com
• Germany: de.renogy.com
• Other Europe: eu.renogy.com

Disclaimer

Renogy ONE Core Quick Guide © 2024 Renogy. All rights reserved.

RENOGY and [Renogy logo] are registered trademarks of Renogy.

• All information in this quick guide is subject to copyright and intellectual property rights of Renogy and its licensors. Reproduction or copying, in whole or in part, is prohibited without prior written permission from Renogy and its licensors.
• Registered trademarks are the property of Renogy. Unauthorized use is strictly prohibited.

Renogy Empowered

Renogy aims to empower people globally through education and distribution of DIY-friendly renewable energy solutions. Renogy strives to be a driving force for sustainable living and energy independence, enabling users to minimize their carbon footprint by reducing reliance on grid power.

Live Sustainably with Renogy

Did you know? In a given month, a 1kW solar energy system can:

• Save 170 pounds of coal from being burned.
• Save 300 pounds of CO₂ from being released into the atmosphere.
• Save 105 gallons of water from being consumed.

Renogy Power PLUS

Renogy Power Plus is a community platform for staying updated on solar energy innovations, sharing experiences, and connecting with like-minded individuals.

Connect with Renogy on social media:

• YouTube: @Renogy Solar
• Instagram: @renogyofficial
• Facebook: @Renogy