Model No: B7153CU Assembly Instructions
Assembly Instructions
- Install the mounting plate (A) on the outlet box with the screws (B).
- Loosen the hex nuts around the bolts (C) and adjust their length for installation.
- Connect the fixture wire to the circuit wire with the wire nuts (D): black wire with live wire, white wire with neutral wire, and ground wire with ground wire. Twist the wires together and wrap the wire nuts with insulated rubber tape.
- Fix the canopy (E) to the mounting plate (A) with the ball nuts (F).
- Place the lamp shade (G) on the socket and tighten it with the socket ring (H).
- Screw the bulb (J) into the lamp holder.
Please consult a qualified electrician if you are not familiar with electrical wiring.
Wiring and Component Diagram Description
The diagram illustrates the electrical connections and components for installing the fixture. It depicts an outlet box mounted to a ceiling, from which wires descend. The main wires from the outlet box are labeled:
- Ground Wire
- Live Wire
- Neutral Wire
These connect to the fixture's wires via wire nuts (D). The diagram shows specific components labeled with letters:
- A: Mounting plate
- B: Screws for mounting plate
- C: Hex nuts on bolts
- D: Wire nuts
- E: Canopy
- F: Ball nuts
- G: Lamp shade
- H: Socket ring
- J: Light bulb
The wiring connections are detailed: the black fixture wire connects to the Live Wire, the white fixture wire connects to the Neutral Wire, and the ground fixture wire connects to the Ground Wire.
Recommended Bulb Shapes
The following bulb shapes are recommended for this fixture, along with their approximate dimensions:
- A60: Height: 4.3 inches, Diameter: 2.37 inches
- A15: Height: 3.5 inches, Diameter: 1.97 inches
- G50: Height: 3 inches, Diameter: 1.97 inches
Note: When securing the glass shade, ensure the larger side of the socket ring is positioned at the top. Avoid overtightening the ring, as this may cause the glass shade to break.
