Ideal Lux Phoenix SP5 Suspension Lamp

Product Information

Model: Phoenix SP5

Type: Suspension Lamp

Lamp Holder: E27

Maximum Wattage: 5 x 60W

Voltage: 220-240V

Frequency: 50/60Hz

Available Colors: White (8021696099101), Black (8021696101163)

Certifications: CE

Ingress Protection: IP20

Dimensions: Height: 1060 mm, Diameter: 900 mm, Base Diameter: 300 mm

Assembly Instructions

Follow the assembly instructions in numerical order.

1. Ensure all screws are tightened firmly to avoid contact problems.
2. The weight of the lamp must be supported by the chain. Adjust the electric wire so that it is longer than the chain.
3. Only use bulbs with a wattage not exceeding the indicated maximum.
4. Always maintain the minimum safety distance between the bulb and the illuminated object as indicated by the icon. Failure to do so may cause a fire.
5. If the safety glass is cracked or broken, it must be replaced immediately with manufacturer-approved parts.
6. The light source (LED) is not replaceable. Do not disassemble the product as the diodes can damage the eyes. Do not immerse in water. Clean with a damp cloth, avoiding solvents and strong detergents.
7. If the lamp is not working, check and replace the fuse if necessary.

Safety Instructions

• This fitting conforms to European safety standards EN 60 598-1.
• Do not dispose of this fitting as household waste. Consult local authorities for disposal information.
• Installation must be carried out by a qualified electrician.
• If the external electrical cable is damaged, it must be replaced exclusively by the manufacturer, distributor, or a qualified electrician.
• Always disconnect the power supply before commencing installation or any maintenance.
• The luminaire contains parts that can become very hot.
• Use mounting accessories suitable for the material to which the fitting is fastened. Included accessories may be unsuitable.
• This fitting should only be installed indoors.
• The fitting is not suitable for direct mounting on normally flammable surfaces.
• The fitting is only suitable for ceiling or wall mounting.
• Class I: Electrical safety guaranteed by main insulation and protective conductor (earthing). Earthing is obligatory.
• Class II: Electrical safety guaranteed by main insulation and double or reinforced insulation. Earthing is not necessary.
• Class III: Electrical safety guaranteed by very low voltage supply (less than 50 Volt). Earthing is excluded.
• Caution: Risk of electric shock.
• Do not stare at the operating light source.

IP Rating Explained

• IP20: Protected against solid objects greater than 12.5 mm. Not protected against water.
• (Other IP ratings are listed in the original document, but IP20 is the primary one for this product).

Manufacturer Information

IDEAL LUX s.r.l.

Via Taglio Destro 32

30035 Mirano (VE) Italy

Website: www.ideal-lux.com

IDEAL LUX Warehouse

Via delle Industrie, 8/D

30036 Santa Maria di Sala (Venezia)

Multilingual Safety Information

This product includes safety and installation instructions in multiple languages, including Polish (PL), Russian (RU), Spanish (ES), German (DE), French (FR), English (EN), Italian (IT), Dutch (NL), Romanian (RO), Bulgarian (BG), Hungarian (HU), Czech (CZ), Croatian (HR), Portuguese (PT), Greek (EL), Estonian (ET), Latvian (LV), Lithuanian (LT), Finnish (FI), Swedish (SV), and Arabic (AR).