Ideal Lux Mapa Bianco SP1 D20 Suspension Lamp

Introduction

This document provides essential installation instructions and safety guidelines for the Ideal Lux Mapa Bianco SP1 D20 suspension lamp. For the safety and reliability of this appliance, it is crucial to follow these instructions properly. Please keep this instruction sheet for future reference.

Safety First

• Ensure the installation is performed by a qualified electrician.
• Always disconnect the mains power before commencing installation or any maintenance work.
• Use only bulbs with the specified maximum wattage (E27 max 1 x 60W).
• Maintain the minimum safety distance between the bulb and the illuminated object as indicated by the icon to prevent fire hazards.
• The light source (LED) is not replaceable. Do not disassemble the product as the diodes can damage the eyes.
• Do not immerse the lamp in water.
• Clean with a damp cloth, avoiding solvents and strong detergents.
• If the safety glass is cracked or broken, it must be replaced immediately with manufacturer-approved parts.
• This fitting is suitable for indoor use only.
• Ensure all screws are tightened firmly to avoid contact problems.
• Use appropriate mounting accessories suitable for the ceiling material.
• Caution: Risk of electric shock. Do not stare at the operating light source.

Installation Guide

Preparation

Before starting, ensure power is disconnected. Identify all parts provided (A, B, C, D).

Step 1: Mount the Bracket

Secure the mounting bracket to the ceiling using appropriate screws and wall plugs. Ensure it is firmly attached.

Step 2: Wire Connections

Feed the electrical wires through the ceiling canopy. Connect the Live (L) wire to the L terminal and the Neutral (N) wire to the N terminal within the canopy. Ensure connections are secure and properly insulated.

Step 3: Secure the Canopy

Attach the canopy to the mounting bracket on the ceiling, covering the wiring.

Step 4: Adjust Cable and Chain

Adjust the length of the electrical cable so that it is longer than the suspension chain. This allows for proper hanging and adjustment of the lamp's height.

Step 5: Attach Lamp Body to Chain

Connect the lamp body to the suspension chain, ensuring it hangs securely and at the desired height.

Step 6: Install the Bulb

Insert an E27 bulb with a maximum wattage of 60W into the lamp socket.

Step 7: Attach the Diffuser/Shade

Carefully attach the glass diffuser or shade to the lamp body as shown in the diagrams.

Technical Specifications

• Bulb Type: E27
• Maximum Wattage: 1 x 60W
• Voltage: 220-240V
• Frequency: 50/60Hz
• Ingress Protection: IP20
• Dimensions: Ø200 mm (Diameter)
• Color: Bianco (White)
• Product Code: 8021696009148
• Safety Class: Class I (requires earthing)