Ideal Lux Mapa Bianco SP5

Technical Specifications

• Bulb Type: E27
• Max Wattage: 5 x 60W
• Voltage: 220-240V
• Frequency: 50/60Hz
• Model/Color: 8021696043562 BIANCO
• Dimensions: Height 1050mm (adjustable), Diameter 540mm
• Ingress Protection: IP20

Assembly Instructions

Follow the numbered steps for assembly. Installation must be performed by a qualified electrician.

1. Prepare mounting points.
2. Connect electrical wiring (Live, Neutral, Earth).
3. Attach the main lamp body to the ceiling/support.
4. Install suspension components (e.g., chain, cable).
5. Attach decorative elements or shades.
6. Install the light bulb.
7. Final adjustments and checks.

Keep these instructions for future reference.

Safety Instructions

Please read and follow all safety instructions carefully:

• This fitting conforms to European safety standards EN 60.598-1.
• Do not dispose of this product as household waste. Consult local authorities for disposal information.
• Installation must be carried out by a qualified electrician.
• Always disconnect power before installation or maintenance.
• The luminaire contains parts that can become hot.
• Use mounting accessories suitable for your specific wall/ceiling material.
• This fitting is for indoor use only.
• Do not mount on or near flammable surfaces.
• The lamp's weight must be supported by the chain; ensure the electrical wire is longer than the chain.
• Use only bulbs with the specified maximum wattage.
• Maintain the minimum safety distance between the bulb and illuminated objects to prevent fire hazards.
• Use only bulbs marked with the auto-protected symbol. Halogen bulbs get very hot; allow them to cool before replacement.
• Replace cracked or broken safety glass immediately with manufacturer-approved parts.
• The light source (LED) is not replaceable. Do not disassemble the product as LEDs can cause eye damage. Do not immerse in water. Clean with a damp cloth, avoiding solvents.
• If the lamp does not light, check and replace the fuse if necessary.
• Electrical Safety Classes:
  • Class I: Requires earthing.
  • Class II: Double or reinforced insulation; earthing not required.
  • Class III: Low voltage (under 50V); earthing not required.
• Ingress Protection: IP20 (Protected against solid objects >12.5mm, no water protection).
• Caution: Risk of electric shock. Do not stare directly at the light source.