DOD Chthonic Fuzz

Product Overview

The DOD Chthonic Fuzz is a guitar effects pedal designed to deliver a unique fuzz tone. This document provides detailed information on its controls, optimal placement and setup, technical specifications, and important safety guidelines.

Visually, the pedal is housed in a compact, durable metal enclosure. It features a striking blue finish adorned with artwork depicting an octopus or kraken-like creature, consistent with the "Chthonic" theme. The control layout includes three knobs (Fuzz, Output, Luster) and a large footswitch for engaging the effect.

Controls and Features

The DOD Chthonic Fuzz features the following controls and connections:

1. Fuzz Control: Adjusts the intensity of the fuzz effect. Turn left for less fuzz, right for more.
2. Output Control: Sets the overall output level of the pedal.
3. Luster Control: Allows the player to dial back high frequencies after the main fuzz distortion.
4. Input Jack: Connect your instrument or the output of another effects pedal here.
5. Output Jack: Connect to your amplifier's input or other effects.
6. LED Power Indicator: Illuminates when the pedal is engaged.
7. Footswitch: Press to engage or bypass the effect.
8. Power Supply Jack: Connect a 9 VDC PS0913BDC power supply (optional) here.

Placement and Setup

Optimal Placement: The Chthonic Fuzz is designed to be placed first in your effects chain. This allows it to interact effectively with your guitar's pickups and volume control. For best results, slightly reduce your guitar's volume. Setting the guitar volume to 7 or 8 allows the Chthonic to achieve a pleasant overdrive. At a guitar volume of 5, you can achieve sparkling clean tones. The pedal's sensitivity means it can react to the capacitance of longer cables, so try to keep the cable leading to the Chthonic's input as short as possible. Avoid placing other pedals before the Chthonic, as buffers can affect its sound.

Setting Up the DOD Chthonic Fuzz: Start with all controls set to the 12:00 position (their midpoint). Adjust to your taste from there. If the result is too extreme, try reducing the Fuzz and Luster controls. Settings will vary significantly based on your instrument's output level, your amplifier, and your playing style.

Specifications

Manufacturer: DOD

Address: 59 Hwagok-ro 61gil, Gangseo-gu, Seoul 07590 Republic of Korea

Support: support@digitech.com

Safety and Compliance

General Warnings:

• [CAUTION] Risk of electric shock. Do not open. (French: ATTENTION: RISQUE DE CHOC ÉLECTRIQUE - NE PAS OUVRIR)
• [WARNING] To reduce the risk of fire or electric shock, do not expose this equipment to rain or moisture. (French: ATTENTION: POUR RÉDUIRE LE RISQUE D'INCENDIE OU D'ÉLECTROCUTION N'EXPOSEZ PAS CET APPAREIL À LA PLUIE OU L'HUMIDITÉ)
• This product is intended for use at altitudes up to 2000 meters (6561 feet). Do not use above this altitude.
• Symbols indicate potential hazards: A [Electric Shock Hazard] symbol (lightning bolt in an equilateral triangle) signifies dangerous voltages within the unit. A [Read Manual] symbol (exclamation mark in an equilateral triangle) indicates that the user must read the operating manual.
• The unit contains no user-serviceable parts. Do not attempt to service the unit yourself. Refer all servicing to qualified personnel. Opening the chassis for any reason will void the manufacturer's warranty.
• Do not expose the unit to liquids. If liquid is spilled on the unit, switch it off immediately and take it for servicing.
• Unplug the unit during lightning storms to prevent damage.

UK Plug Specifics: If a molded mains plug is cut off from the cable, it must be disposed of properly. Never insert a damaged or cut plug into a 13-amp socket. Ensure the fuse cover is in place when using the mains connector. Replacement fuses should be 13 amps and ASTA approved to BS1362.

Disposal: Do not dispose of this product with general household waste. It must be collected separately for proper treatment, recovery, and recycling according to applicable legislation. Consumers in EU member states, Switzerland, and Norway can return used electronic products free of charge to designated collection points or retailers.

User Safety Instructions:

• Read and keep these instructions.
• Heed all warnings.
• Follow all instructions.
• Do not use this apparatus near water.
• Clean only with a dry cloth.
• For indoor use only.
• Do not block any ventilation openings. Install in accordance with the manufacturer's instructions.
• Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
• Use only accessories/attachments specified by the manufacturer.
• Unplug this apparatus during lightning storms or when unused for long periods.

Electrical Safety:

• This apparatus must be connected to a grounded mains socket.
• Wiring color codes for the power cord may be: Green and Yellow – Earth/Ground ([Ground Symbol]); Blue – Neutral; Brown – Live.
• If the wire colors do not match the terminal markings on your plug, follow these guidelines: Connect the Green/Yellow wire to the terminal marked 'E' [Ground Symbol], or Green or Green/Yellow. Connect the Blue wire to the terminal marked 'N' or Black. Connect the Brown wire to the terminal marked 'L' or Red.
• Ensure the apparatus has a suitable means of disconnection from the mains supply, such as a plug that is accessible. If the plug needs to be changed, servicing should be performed by qualified personnel.
• The green/yellow wire must be connected directly to the unit's chassis.
• WARNING: If the grounding is interrupted, certain faults in the unit or system could result in a full line voltage on the chassis. Touching the chassis and ground simultaneously could cause severe injury or death.