DOD Chthonic Fuzz

Product Overview

The DOD Chthonic Fuzz is a guitar effects pedal designed to deliver a unique fuzz tone. This document provides details on its controls, placement, specifications, and safety guidelines.

Image description: A blue guitar pedal with intricate artwork featuring an octopus-like creature. It has three control knobs labeled 'FUZZ', 'LUSTRE', and 'OUTPUT', a footswitch, and various input/output jacks.

Controls and Features

The DOD Chthonic Fuzz features the following controls and connections:

• 1. Fuzz Control: Adjusts the intensity of the fuzz effect. Turn left for less fuzz, right for more.
• 2. Output Control: Sets the overall output level of the pedal.
• 3. Lustre Control: Allows the musician to reduce high frequencies after the main distortion stages of the pedal, shaping the tone's brightness.
• 4. Input Jack: Connect your instrument or the output of another effects pedal here.
• 5. Output Jack: Connect to your amplifier's input or other effects.
• 6. Power LED Indicator: Lights up when the pedal is powered on.
• 7. Footswitch: Press to engage or bypass the effect.
• 8. Power Jack: Connect a 9VDC PS0913BDC power supply (optional) to this jack.

Placement and Configuration

Placement: The Chthonic Fuzz is designed to be placed early in your signal chain to interact effectively with guitar pickups and volume controls. For optimal results, slightly rolling back your guitar's volume knob is recommended. Setting the guitar's volume to 7 or 8 can achieve a good overdrive, while setting it to 5 will produce clean, bright tones. The pedal is sensitive to cable capacitance; use the shortest possible input cable. Avoid placing buffer pedals before the Chthonic, as they can alter its tone.

Configuration: Begin with all controls set to the 12 o'clock position (center). Adjust to your preference. If the sound is too extreme, reduce the Fuzz and Lustre controls. Settings will vary based on your instrument's output, amplifier, and playing style.

Specifications

• INPUT: 1¼" Instrument
• OUTPUT: 1¼" Instrument
• CHASSIS MATERIAL: All Metal
• Bypass: True Bypass
• POWER SUPPLY: 9V Alkaline Dry Battery, PS0913DC power supply
• Dimensions: HEIGHT: 2.25" (5.71 cm), WIDTH: 2.63" (6.68 cm), LENGTH: 4.68" (11.88 cm)
• WEIGHT: ~1.0 lbs. (~ 0.453 kg)
• Warranty: 1 Year

Compliance and Safety Instructions

General Safety:

• This product is intended for use at low altitudes; do not use above 2,000 meters (approx. 6,560 feet).
• Electrical Symbols: The symbols on the unit alert users to potential dangers. A lightning bolt in a triangle indicates dangerous voltages. An exclamation mark in a triangle indicates that the user should consult the owner's manual.
• Servicing: There are no user-serviceable parts inside. Do not open the unit or attempt repairs yourself. Refer all servicing to qualified personnel. Opening the chassis voids the warranty.
• Water and Liquids: Do not expose the unit to water or moisture. If liquid is spilled, unplug immediately and seek professional service.
• Storms: Unplug the unit during lightning storms or when unused for extended periods to prevent damage.

UK Mains Plug Warning:

• A molded plug cut from a cord is unsafe. Dispose of it properly.
• Never insert a damaged or cut-off power plug into a 13 Amp socket.
• Ensure the fuse cover is in place. Replacement fuses (13 Amp) must be ASTA approved to BS1362.

Product Disposal:

• Do not mix this product with general household waste. It must be collected and recycled separately according to local legislation for electronic waste.
• Contact local authorities for correct disposal methods.

General Usage Precautions:

• Read and keep all instructions.
• Heed all warnings and follow all instructions.
• Do not use near water.
• Clean only with a dry cloth.
• For indoor use only.
• Do not block ventilation openings. Install according to manufacturer instructions.
• Do not install near heat sources (radiators, stoves, amplifiers, etc.).
• Use only manufacturer-specified attachments/accessories.
• Protect the power cord from damage (pinching, walking on).
• Use with a suitable cart, stand, or table, and exercise caution when moving wheeled combinations.
• Servicing is required if the unit is damaged (cord, plug, liquid spill, dropped, exposed to rain/moisture, not operating normally).
• The power switch does NOT interrupt the mains connection. Ensure the plug is accessible for disconnection.
• For 240V supplies, use an appropriate CSA/UL certified power cord.

Power Cord Wiring:

WARNING: This appliance must be connected to a mains socket with a protective earth connection.

The power cord conductors are colored as follows:

• GREEN AND YELLOW – EARTH
• BLUE – NEUTRAL
• BROWN – LIVE

If conductor colors do not match the plug's terminal markings, proceed as follows:

• GREEN/YELLOW conductor: Connect to the terminal marked 'E', the earth symbol (?), or colored GREEN or GREEN/YELLOW.
• BLUE conductor: Connect to the terminal marked 'N' or colored BLACK.
• BROWN conductor: Connect to the terminal marked 'L' or colored RED.

Different line cords or fixture plugs may be required depending on the installation's power source. Consult qualified service personnel for alterations.

WARNING: If the earth connection is compromised, certain failure conditions may result in full line voltage on the chassis. Serious injury or death may occur if the chassis and ground are touched simultaneously.