Product Overview
The DOD Chthonic Fuzz is a guitar effects pedal designed to deliver versatile fuzz tones. It offers intuitive controls for shaping the fuzz intensity, output level, and high-frequency response, providing musicians with a wide range of sonic possibilities.
Controls and Features
- 1. Fuzz Control: Adjusts the intensity of the fuzz effect. Turn left for less fuzz, right for more.
- 2. Output Control: Sets the overall output level of the pedal.
- 3. Lustre Control: Allows the user to reduce high frequencies after the main distortion stages of the pedal.
- 4. Input Jack: Connect your instrument or the output of another effect pedal to this input.
- 5. Output Jack: Connect to your amplifier or other effects.
- 6. Power LED Indicator: Illuminates when the pedal is active.
- 7. Footswitch: Press to engage or disengage the effect.
- 8. Power Connector: Connect a 9V DC power supply (PS0913BDC optional) to this connector.
Positioning and Settings
Positioning
The Chthonic Fuzz is designed to be placed first in your signal chain to interact optimally with guitar pickups and volume controls. Lowering your guitar's volume slightly will yield the best results. Setting the guitar's volume to 7 or 8 allows the Chthonic to clean up into a nice overdrive, while a setting of 5 produces clean and bright tones. The pedal is sensitive to cable capacitance; use the shortest possible cable for the input. Avoid placing other pedals before the Chthonic, as their buffers can affect the tone.
Settings
Begin with all controls set to 12:00 (midpoint). Adjust to taste. If the result is too extreme, lower the Fuzz and Lustre controls. Optimal settings depend on your instrument's output, amplifier, and playing style.
Specifications
| Feature | Detail |
|---|---|
| INPUT | 1/4" Instrument |
| OUTPUT | 1/4" Instrument |
| CHASSIS MATERIAL | All Metal |
| Bypass | True Bypass |
| POWER SUPPLY | 9V Alkaline Dry Battery, PS0913DC power supply |
| Dimensions: HEIGHT | 2.25" (5.71 cm) |
| WIDTH | 2.63" (6.68 cm) |
| LENGTH | 4.68" (11.88 cm) |
| WEIGHT | ~1.0 lbs. (~ 0.453 kg) |
| Warranty | 1 Year |
Safety and Compliance Information
General Warnings
- This product is intended for use at low altitudes; do not use above 2000 meters.
- Symbols indicate potential electrical hazards. [High Voltage Warning] symbol indicates dangerous voltages inside. [Caution] symbol indicates the need to refer to the owner's manual.
- Do not open the unit or attempt self-repair. Service should be performed by qualified personnel. Opening the chassis voids the warranty.
- Do not expose the unit to rain or moisture. If liquid is spilled, turn off immediately and seek service.
- Disconnect the unit during thunderstorms to prevent damage.
UK Plug Warning
Do not use a damaged or cut mains plug. Ensure the fuse cover is in place. Replacement fuses should be 13A and ASTA approved.
Disposal
Do not mix this product with general household waste. Use designated collection systems for electronic waste for proper treatment, recovery, and recycling. Contact local authorities for correct disposal methods in your region.
General Precautions
- Read and keep these instructions.
- Observe all warnings and follow all instructions.
- Do not use near water.
- Clean only with a dry cloth.
- For indoor use only.
- Do not block ventilation openings. Install according to manufacturer instructions.
- Do not install near heat sources like radiators or amplifiers.
Power Cord Safety
- Use only manufacturer-specified accessories.
- Unplug during thunderstorms or long periods of non-use.
- Do not defeat the safety purpose of polarized or grounding-type plugs.
- Protect the power cord from being walked on or pinched.
- Use only with specified carts, stands, or tables. Exercise caution when moving equipment on carts.
- Refer servicing to qualified personnel if the unit is damaged, liquid is spilled, or it malfunctions.
- The power switch does not disconnect the unit from the mains supply.
- Ensure the plug remains accessible for disconnection.
- For 240V operation, use a CSA/UL certified power cord.
Wiring Instructions
WARNING: This appliance must be connected to a mains socket with a protective earth connection.
Wire Color Codes:
- Green and Yellow: Earth / Ground
- Blue: Neutral
- Brown: Live (Phase)
Connection Guide:
- Green/Yellow wire connects to the terminal marked 'E', earth symbol, or colored green/green-yellow.
- Blue wire connects to the terminal marked 'N' or colored black.
- Brown wire connects to the terminal marked 'L' or colored red.
Important Note: If the earth connection is made incorrectly, it can lead to dangerous conditions, potentially causing severe or fatal injuries if the chassis and earth are touched simultaneously.
