Cabinet

Important Information

❗ Please read the entire manual before starting to assemble and/or using this product. Follow the manual thoroughly and keep it for further reference.

Avoid Scratches! In order to avoid scratching, this furniture should be assembled on a soft layer, such as a rug.

Improve Efficiency! Try to find a partner to install with you, which can speed up the installation efficiency and shorten the time.

Anti-Topple Warning! ⚠️ Overturned furniture can cause serious or fatal crush injuries. To prevent tipping over, be sure to use the wall attachment, if not included with this product. Please purchase the wall attachment that fits your wall. If unsure, seek professional advice. Please read and follow each step of the instructions carefully.

Important! It is important that any product which is assembled using any kind of screw is re-tightened 2 weeks after assembly, and once every 3 months, to assure stability throughout the lifespan of the product.

For regular maintenance and cleaning of the product, for the frame, please use a rag dipped in neutral detergent to fully wipe it, and then dry it with a clean rag. For glass materials, wipe with a rag dampened with water glass cleaner, and then dry with a dry rag. Do not use an electric screwdriver, and do not use too much force when installing, because the board is easy to break.

Tools and Parts Identification

Please prepare the following tools:

When installing, please carefully confirm whether each screw corresponds to the manual; accessories with similar shapes can be distinguished by size.

Hardware List:

• A: 6 x 35 mm (88+6 pcs)
• B: 15 x 12 mm (60+3 pcs)
• C: 15 x 9.5 mm (28+3 pcs)
• D: 6 x 30 mm (60+5 pcs)
• E: 3 x 14 mm (30+6 pcs)
• F: 3.5 x 16 mm (40+6 pcs)
• G: 12 pcs
• H: 4 pcs
• J: 24 pcs
• K: 10 pcs
• L: 3 pcs (300 mm)
• M: 3 pcs (300 mm)
• N: 5 pcs
• O: 2 pcs
• P: 2 pcs
• Q: 8 pcs
• R: 32 pcs (white)
• S: 56 pcs (natural)

Main Components (Numbered in Diagrams):

The assembly involves numerous numbered boards and panels, including but not limited to: 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29, 30, 31, 32, 33.

A detailed visual breakdown of these parts is provided in the original document's diagrams.

Assembly Steps

Step 1

Screw eccentric rod(A) and insert wooden dowel(D) into board 5 and 6 at first. Fix slide rail(L) and (M) to board 5 and 6 respectively with screw(E) as shown.

Step 2

Screw eccentric rod(A) and insert wooden dowel(D) into boards 1, 4, 5, 6, and 7 at first.

Step 3

Connect board 13 and 14 to board 5 and 6. Add cam lock(B) into board 13, 14 and turn clockwise to tighten as shown.

Step 4

Connect board 12 to board 5 and 4, add cam lock(B) into board 12 and turn clockwise to tighten. Connect board 12 to board 6 and 7, add cam lock(B) into board 12 and turn clockwise to tighten.

Step 5

Cover board 1 to board 4, 5, 6, and 7, add cam lock(B) into and turn clockwise to tighten as shown.

Step 6

Insert back boards 18 and 19 along available grooves as shown.

Step 7

Screw eccentric rod(A) and insert wooden dowel(D) into board 2 at first. Flip the board, screw eccentric rod(A) and insert wooden dowel(D) as well. Screw eccentric rod(A) and insert wooden dowel(D) into boards 8, 9, 10, and 11 as shown. Fix slide rail(L) and (M) to board 9 and 10 respectively with screw(E) as shown.

Step 8

Attach board 2 to boards 4, 5, 6, and 7, add cam lock(B) into and turn clockwise to tighten as shown.

Step 9

Connect board 15 and 16 to board 9 and 10, add cam lock(B) into board 15, 16 and turn clockwise to tighten as shown.

Step 10

Screw eccentric rod(A) and insert wooden dowel(D) into board 3 as shown.

Step 11

Attach board 17 to board 3, add cam lock(B) into and turn clockwise to tighten as shown.

Step 12

Attach board 9 and 10 to board 3, add cam lock(B) into and turn clockwise to tighten as shown.

Step 13

Connect board 8 and 11 to board 3 and 17. Add cam lock(B) into board 17; add cam lock(C) into board 3 and turn clockwise to tighten as shown.

Step 14

Insert back boards 20 and 21 along grooves as shown.

Step 15

Connect the two assembled components, add cam lock(B) and turn clockwise to tighten as shown.

Step 16

Insert buckle(J) into back slots and fix to tighten. Fix back boards 18, 19, 20, and 21 to boards 12, 13, and 15 with screw(Q) as shown.

Step 17

Fix hinge(K) to boards 22, 23, 24, and 25 with screw(F) as shown. Fix knob(H) as shown.

Step 18

Assemble doors 22, 23, 24, and 25 to the cabinet by fixing hinges with screw(F) as shown.

Step 19

If doors are still not aligned, please watch the video for hinge adjustment: https://youtu.be/n0Lb36SoODM

Step 20

Screw eccentric rod(A) into boards 26, 27, 28, and 29 as shown.

Step 21

Fix board 32 to boards 30 and 31 with screw(G) as shown.

Step 22

Insert bottom board 33 along grooves as shown.

Step 23

Attach boards 26 and 27, 28 and 29 to the components, add cam lock(C) and turn clockwise to tighten as shown.

Step 24

Fix runner(L) and (M) to boards 30 and 31 with screw(E) as shown.

Step 25

Insert all drawers in. Use sticker(R/S) to cover cam lock holes.

Step 26

Install anti-tipping device as shown. This involves securing the device to the wall and the cabinet.

Warranty

Warranty Claims

• There is a 30-day warranty for broken furniture or any other problems that do not work properly. The warranty will start from the date of purchase, which must be verified by proof of purchase.
• Before making a claim, please call FUFUGAGA. Provide your purchase order number and details of the problem. Replacement parts will be arranged within 48 hours. If out of stock, a shipping date will be provided.
• The product must be used in accordance with the instructions provided.
• For other reasons, if the furniture needs to be returned, it must be cleaned and dried and returned within 30 days of receipt.

Type of Warranty Claim

• Failure to follow the furniture instructions will invalidate the warranty.
• Damage during installation is not covered, but damage during transportation is.

Scope of Responsibility

• FUFUGAGA shall not bear responsibility for misuse or user damage and/or loss of parts during the installation of furniture.
• After use, damage and scratches to the furniture are not covered by the warranty.

Warranty Coverage Areas:

• Sheet parts: 1 month from the date of purchase.
• Electrical parts: 1 month from the date of purchase.

Returns

Changed Your Mind and Need to Return Your Item?

Please follow the below instructions:

• If you have purchased and simply changed your mind, follow the retailer's instructions for returns.

Defective Items

• If your item is defective in any way, i.e., it doesn't work but you can't identify why, please call FUFUGAGA in the first instance.

Damaged Items

• If you receive an order with obvious shipping damage from the retailer, refuse the delivery. If the delivery has been accepted and shipping damage is found, please follow the specific instructions advised by the retailer.
• In all circumstances, please save all packaging material and paperwork for the order. Please be aware that if you dispose of packaging material or attempt to return the merchandise without contacting the fulfiller, you jeopardize your chances of making a claim, and you may not receive a credit for the return.

After-Sales Contact

? feedbackstation@163.com ? (303)800-6387