Material Declaration Form

This document outlines the material declaration for STMicroelectronics products, adhering to the IPC-1752 standard.

General Information

Form type	IPC-1752	Version	2
Sectionals	Distribute	Subsectionals	A-D
Material information	Material information	Manufacturing information	Manufacturing information
*: Required Field

Supplier Information

Company name	STMicroelectronics	Response Date	2025-06-26
Contact name	Refer to Supplier Comment section	Contact phone	Refer to Supplier Comment section
Contact email	Refer to Supplier Comment section	Authorized representative	MDG CHAMPION
Representative title	Representative title	Representative phone	Refer to Supplier Comment section
Representative email	Refer to Supplier Comment section	Supplier comment	Refer to Supplier Comment section
Online Technical Support - STMicroelectronics: http://www.st.com/web/en/support/support.html

Uncertainty Statement

STMicroelectronics provides this document and its contents on an 'as is' and 'as available' basis. STMicroelectronics disclaims all warranties, express or implied, related to this document and its contents, including but not limited to implied warranties of completeness, truth, accuracy, merchantability, fitness for a particular purpose, and non-infringement. ST shall have no responsibility and assumes no liability for any cost, loss, or damage of any kind which could arise, directly or indirectly, from the use or inability to use this document and/or its contents.

Legal Statement

Supplier acceptance	true	Legal declaration	Standard
Supplier certifies that it gathered the provided information and such information is true and correct to the best of its knowledge and belief, as of the date that Supplier completes this form. Supplier acknowledges that Company will rely on this certification in determining the compliance of its products. Company acknowledges that Supplier may have relied on information provided by others in completing this form, and that Supplier may not have independently verified such information. However, in situations where Supplier has not independently verified information provided by others, Supplier agrees that, at a minimum, its suppliers have provided certifications regarding their contributions to the part(s), and those certifications are at least as comprehensive as the certification in this paragraph. If the Company and the Supplier enter into a written agreement with respect to the identified part(s), the terms and conditions of that agreement, including any warranty rights and/or remedies provided as part of that agreement, will be the sole and exclusive source of the Supplier's liability and the Company's remedies for issues that arise regarding information the Supplier provides in this form.

Product Information

Mfr item number	STM32WBA65CIU6	Mfr item name	65MI*4B0XXXZ	Amount	102	Unit of measure	mg	Manufacturing site	998Z	Unit type	Each
Version	A	Manufacturing information		date	2025-06-26
J-STD-020 MSL rating	3	Classification temperature	260	Number of reflow cycles	3	ST ECOPACK grade	ECOPACK® 2
Bulk solder termination		Terminal plating	Tin (Sn), matte, annealed	Number of reflow cycles	3
Not Applicable	Terminal base alloy	Not Applicable	Package designator	QFN	Package size	7x7	Number of instances	48	Shape	Flat
Comment	Package: A0B9 UFQFPN 7X7X0.55 48L 0.5 MM PITCH 8202210

QueryList: RoHS Directive 2011/65/EU-8 June 2011 - Annex II amended by Delegated Directive 2015/863 - 31 March 2015

Query	Description	Response
1- Product(s) meets EU RoHS requirement without any exemptions		true
2- Product(s) meets EU RoHS requirements except lead in solder and this usage may qualify under the lead in solder '7b' exemption (other selected exemptions may apply)		false
3- Product(s) meets EU RoHS requirements by application of the selected exemption(s)		false
4- Product(s) does not meet EU RoHS requirements and is not under exemptions		false
Exemption Id.

QueryList: REACH - 21st January 2025

Query	Description	Response
1- Product(s) does not contain REACH Substances Of Very High Concern above the limits per the definition within REACH		true
CategoryLevel_Name	CategoryLevel_Threshold
N/A	0

Material Composition Declaration

Note: Substance present with less 0.001mg will not be declared in this document

Mfr Item Name	Mass	Unit of measure	Homogeneous material	Material group	Substance category	Substance	CAS	Exempt	Mass	Unit of measure	Level	Concentration in homogeneous material (ppm)	Concentration in product (ppm)
65MI*4B0XXXZ	49.8293	mg
	6000000.0
	1000000.0
Die or dies	2.501	mg	die	M-011 Other inorganic materials	supplier	Silicon (Si)	7440-21-3		2.256	mg	supplier	902164	45280.86
			metallization	supplier	Aluminium (Al)	7429-90-5		0.027	mg	supplier	10985	551.35
			metallization	supplier	Copper (Cu)	7440-50-8		0.081	mg	supplier	32269	1619.63
			metallization	supplier	Tantalum (Ta)	7440-25-7		0.014	mg	supplier	5493	275.70
			metallization	supplier	Titanium (Ti)	7440-32-6		0.003	mg	supplier	1373	68.91
			metallization	supplier	Tungsten (W)	7440-33-7		0.001	mg	supplier	343	17.22
			Passivation	supplier	Silicon Nitride	12033-89-5		0.019	mg	supplier	7552	379.05
			Passivation	supplier	Silicon Oxide	7631-86-9		0.100	mg	supplier	39821	1998.67
DAF (FH9011T)	0.424	mg	Other Organic Materials	supplier
				Organic Compounds	Epoxy Resin	Proprietary		0.060	mg	supplier	142180	1209.82
				Organic Compounds	Phenol Resin	Proprietary		0.060	mg	supplier	142180	1209.82
				Organic Compounds	SiO2 Filler	Proprietary		0.022	mg	supplier	52133	443.60
				Organic Compounds	(Meta)Acrylate Copolymer	Proprietary		0.281	mg	supplier	663507	5645.82
Encapsulation (EME-G770)	15.809	mg	Other Organic Materials	supplier
				Organic Compounds	Epoxy Resin A	Proprietary		0.332	mg	supplier	21000	6662.53
				Organic Compounds	Epoxy Resin B	Proprietary		0.332	mg	supplier	21000	6662.53
				Organic Compounds	Phenol Resin A	Proprietary		0.332	mg	supplier	21000	6662.53
			Glass	Silica(Amorphous)A	60676-86-0		12.338	mg	supplier	780450	247608.17
			Glass	Silica(Amorphous)B	7631-86-9		1.823	mg	supplier	115320	36586.81
				Organic Compounds	Carbon Black	1333-86-4		0.098	mg	supplier	6230	1976.55
				Metallic compounds	Metal Hydroxide	Proprietary		0.221	mg	supplier	14000	4441.69
				Organic Compounds	Phenol Resin B	Proprietary		0.332	mg	supplier	21000	6662.53
Bonding Wire (Au)	0.376	mg	Bonding Wire	supplier	Metals	Gold	7440-57-5		0.376	mg	supplier	1000000	7552.56
Plating (Sn)	0.719	mg	Other inorganic materials	supplier	Metals	Tin	7440-31-5		0.719	mg	supplier	1000000	14427.86
Leadframe (C7025 + Ag)	30.000	mg	Copper & its alloys	supplier	Metals	Copper	7440-50-8		28.725	mg	supplier	957500	576468.43
				Metals	Magnesium	7439-95-4		0.045	mg	supplier	1500	903.08
				Metals	Nickel	7440-02-0		0.894	mg	supplier	29800	17941.26
				Metals	Silicon	7440-21-3		0.195	mg	supplier	6500	3913.36
				Metals	Siliver	7440-22-4		0.141	mg	supplier	4700	2829.66

	STMicroelectronics Material Declaration Form for STM32MP255FAK3 This document provides a detailed material declaration for the STMicroelectronics STM32MP255FAK3 component, following the IPC-1752 standard. It includes information on RoHS and REACH compliance, manufacturing details, and a comprehensive breakdown of the material composition.
	STMicroelectronics STM32G431RBI3 Material Declaration (IPC-1752) Detailed material declaration for the STMicroelectronics STM32G431RBI3 microcontroller, including compliance information for RoHS and REACH, and a breakdown of constituent materials according to IPC-1752 standards.
	STMicroelectronics STM32F205RET6 Material Declaration Form (IPC-1752) Official material declaration form for the STMicroelectronics STM32F205RET6 microcontroller, detailing substance composition, RoHS compliance, and REACH information according to IPC-1752 standards.
	STMicroelectronics STM32MP253FAK3 Material Declaration Form (IPC-1752) This document provides the material declaration for the STMicroelectronics STM32MP253FAK3 component, adhering to the IPC-1752 standard. It details material composition, RoHS compliance, and REACH substance information.
	STMicroelectronics HD6RUY29ABA Materials Declaration Material declaration for the STMicroelectronics HD6RUY29ABA, detailing its compliance with RoHS and REACH regulations, and providing a breakdown of its homogeneous material composition.
	STMicroelectronics STM32L562RET6 Material Declaration Form Detailed material declaration for the STMicroelectronics STM32L562RET6 component, providing comprehensive information on its composition, compliance with RoHS and REACH directives, and manufacturing details, adhering to IPC-1752 standards.
	STMicroelectronics STM32MP255DAK3 Material Declaration Form (IPC-1752) Detailed material declaration for the STMicroelectronics STM32MP255DAK3 component, compliant with IPC-1752 standards, including substance composition, RoHS, and REACH compliance information.
	STMicroelectronics STM32MP235AAK3 Material Declaration - RoHS & REACH Compliance Detailed material composition declaration for the STMicroelectronics STM32MP235AAK3 component (Mfr Item Name: EJ79*505XXXY), including RoHS and REACH compliance status, and material breakdown.