Material Declaration Form

General Information

IPC: 1752

Form type: Distribute

Sectionals: Material information

Version: 2

Subsectionals: A-D

Supplier Information

Field	Value
Company name:	STMicroelectronics
Contact name:	Refer to Supplier Comment section
Contact phone:	Refer to Supplier Comment section
Contact email:	Refer to Supplier Comment section
Authorized representative:	MDG CHAMPION
Representative title:	MDG Material Declaration champion
Representative phone:	Refer to Supplier Comment section
Representative email:	Refer to Supplier Comment section
Supplier comment:	Online Technical Support - STMicroelectronics: http://www.st.com/web/en/support/support.html
Response Date:	2025-07-09

Uncertainty Statement

While STMicroelectronics has endeavored to provide information which is accurate and up to date, this document and its contents are provided on a strict 'as is' and 'as available' basis. STMicroelectronics disclaims all warranties, express or implied related to this document and its contents, including but not limited to implied warranties of completeness, truth, accuracy, merchantability, fitness for a particular purpose and non-infringement. ST shall have no responsibility and assumes no liability for any cost, loss or damage of any kind which could arise, directly or indirectly, from the use or inability to use this document and/or its contents.

Legal Statement

Supplier acceptance: true

Legal declaration: Standard

Supplier certifies that it gathered the provided information and such information is true and correct to the best of its knowledge and belief, as of the date that Supplier completes this form. Supplier acknowledges that Company will rely on this certification in determining the compliance of its products. Company acknowledges that Supplier may have relied on information provided by others in completing this form, and that Supplier may not have independently verified such information. However, in situations where Supplier has not independently verified information provided by others, Supplier agrees that, at a minimum, its suppliers have provided certifications regarding their contributions to the part(s), and those certifications are at least as comprehensive as the certification in this paragraph. If the Company and the Supplier enter into a written agreement with respect to the identified part(s), the terms and conditions of that agreement, including any warranty rights and/or remedies provided as part of that agreement, will be the sole and exclusive source of the Supplier's liability and the Company's remedies for issues that arise regarding information the Supplier provides in this form.

Product Details

Field	Value
Mfr item number:	STM32L562RET6
Mfr item name:	635W*472XXXZ
Amount:	359
Unit of measure:	mg
Version:	A
Manufacturing site:	998Z
Unit type:	Each
Date:	2025-07-09
ST ECOPACK grade:	ECOPACK® 2

Manufacturing Information

Field	Value
J-STD-020 MSL rating:	3
Bulk solder termination:	Not Applicable
Package designator:	QFP
Classification temperature:	260
Terminal plating:	Tin (Sn), matte, annealed
Package size:	10x10
Package:	5W LQFP 64 10x10x1.4 10051434
Number of reflow cycles:	3
Terminal base alloy:	Copper Alloy
Number of instances:	64
Shape:	Gull wing

RoHS Directive QueryList

RoHS Directive 2011/65/EU - 8 June 2011, Annex II amended by Delegated Directive 2015/863 - 31 March 2015

1 - Product(s) meets EU RoHS requirement without any exemptions
2 - Product(s) meets EU RoHS requirements except lead in solder and this usage may qualify under the lead in solder '7b' exemption (other selected exemptions may apply)
3 - Product(s) meets EU RoHS requirements by application of the selected exemption(s)
4 - Product(s) does not meet EU RoHS requirements and is not under exemptions

Exemption Id.	Description	Response
#N/A		true
		false
		false
		false

REACH QueryList

REACH - 21st January 2025

QUERY	Description	CategoryLevel_Name	CategoryLevel_Threshold	amount in product (mg)	Application	Response
1 - Product(s) does not contain REACH Substances Of Very High Concern above the limits per the definition within REACH		#N/A	0			true

Material Composition Declaration

Note: Substance present with less 0.001mg will not be declared in this document.

Homogeneous material	Material group	Substance category	Substance	CAS	Mass	Unit of measure	Level	Concentration in homogeneous material (ppm)	Concentration in product (ppm)
Die or dies	M-011 Other inorganic materials	die	Silicon (Si)	7440-21-3	14.485	mg	supplier	911738	40306.25
		metallization	Aluminium (Al)	7429-90-5	0.064	mg	supplier	4032	178.25
		metallization	Copper (Cu)	7440-50-8	0.598	mg	supplier	37634	1663.73
		metallization	Tantalum (Ta)	7440-25-7	0.192	mg	supplier	12097	534.79
		metallization	Titanium (Ti)	7440-32-6	0.007	mg	supplier	448	19.81
		metallization	Tungsten (W)	7440-33-7	0.007	mg	supplier	448	19.81
		Passivation	Silicon Nitride	12033-89-5	0.149	mg	supplier	9409	415.95
		Passivation	Silicon Oxide	7631-86-9	0.384	mg	supplier	24194	1069.57
Glue epoxy (EN4900GC)	Other Organic Materials		Acrylic resin	Proprietary	0.064	mg	supplier	70000	177.70
		Organic Compounds	Polybutadiene derivative	Proprietary	0.018	mg	supplier	20000	50.77
		Organic Compounds	Butadiene copolymer	Proprietary	0.014	mg	supplier	15000	38.08
		Organic Compounds	Acrylate	Proprietary	0.049	mg	supplier	54000	137.08
		Organic Compounds	Epoxy resin	Proprietary	0.027	mg	supplier	30000	76.16
		Organic Compounds	Peroxide	Proprietary	0.007	mg	supplier	8000	20.31
		Organic Compounds	Additive	Proprietary	0.016	mg	supplier	18000	45.69
		Metals	Silver	7440-22-4	0.716	mg	supplier	785000	1992.81
Encapsualtion (EME-G700LAL-A)	Other Organic Materials		Epoxy Resin	Proprietary	12.980	mg	supplier	55000	36118.81
		Organic Compounds	Phenol Resin	Proprietary	4.956	mg	supplier	21000	13790.82
		Glass	Silica(Amorphous)A	60676-86-0	188.800	mg	supplier	800000	525364.48
		Glass	Silica(Amorphous)B	7631-86-9	28.084	mg	supplier	119000	78147.97
		Organic Compounds	Carbon Black	1333-86-4	1.180	mg	supplier	5000	3283.53
Bonding wire (Cu)	Bonding Wire		Copper	7440-50-8	0.804	mg	supplier	965500	2236.64
		Metals	Palladium	7440-05-3	0.026	mg	supplier	31000	71.81
		Metals	Gold	7440-57-5	0.003	mg	supplier	3500	8.11
Plating anode (Sn)	Other inorganic materials		Tin	7440-31-5	1.438	mg	supplier	1000000	4001.05
Leadframe (C7025 + Ag)	Copper & its alloys		Copper	7440-50-8	101.536	mg	supplier	973499	282538.63
		Metals	Iron	7439-89-6	2.377	mg	supplier	22790	6614.34
		Metals	Phosphor	7723-14-0	0.026	mg	supplier	250	72.56
		Metals	Zinc	7440-66-6	0.131	mg	supplier	1260	365.69
		Metals	Siliver	7440-22-4	0.229	mg	supplier	2200	638.51
		Metals	Lead	7439-92-1	0.000	mg	supplier	1	0.29

	STMicroelectronics Material Declaration Form for STM32MP255FAK3 This document provides a detailed material declaration for the STMicroelectronics STM32MP255FAK3 component, following the IPC-1752 standard. It includes information on RoHS and REACH compliance, manufacturing details, and a comprehensive breakdown of the material composition.
	STMicroelectronics STM32F205RET6 Material Declaration Form (IPC-1752) Official material declaration form for the STMicroelectronics STM32F205RET6 microcontroller, detailing substance composition, RoHS compliance, and REACH information according to IPC-1752 standards.
	STMicroelectronics STM32L071CBT3 Material Declaration - RoHS & REACH Compliance Official material declaration for the STMicroelectronics STM32L071CBT3 component, detailing substance composition, RoHS compliance, and REACH status. Includes material breakdown by homogeneous material.
	STMicroelectronics STM8AF6248TAY Material Declaration (IPC-1752) Detailed material declaration for the STMicroelectronics STM8AF6248TAY microcontroller, including RoHS and REACH compliance status, and material composition data according to IPC-1752 standard.
	STMicroelectronics STM32L072CZT7 Material Declaration - RoHS & REACH Compliance Detailed material declaration for the STMicroelectronics STM32L072CZT7 microcontroller, including RoHS and REACH compliance status and full material composition breakdown.
	STMicroelectronics STM32G431RBI3 Material Declaration (IPC-1752) Detailed material declaration for the STMicroelectronics STM32G431RBI3 microcontroller, including compliance information for RoHS and REACH, and a breakdown of constituent materials according to IPC-1752 standards.
	STMicroelectronics STM32MP255DAK3 Material Declaration Form (IPC-1752) Detailed material declaration for the STMicroelectronics STM32MP255DAK3 component, compliant with IPC-1752 standards, including substance composition, RoHS, and REACH compliance information.
	STMicroelectronics STM32MP235AAK3 Material Declaration - RoHS & REACH Compliance Detailed material composition declaration for the STMicroelectronics STM32MP235AAK3 component (Mfr Item Name: EJ79*505XXXY), including RoHS and REACH compliance status, and material breakdown.