Signature Design by Ashley D394-32 Table Assembly Instructions
Model: D394-32
Brand: Signature Design by Ashley
Important Safety Information
WARNING: READ CAREFULLY BEFORE BEGINNING ASSEMBLY!
- Always use proper tools.
- Follow the assembly steps in order. Do not skip any steps.
- Check all packing materials for small parts that may have come loose. Contact the retailer for missing parts. DO NOT USE SUBSTITUTE PARTS.
- Periodically check that all connectors (bolts, screws, etc.) are tight.
- Keep instructions for future reference.
- Handle glass or mirrors with extreme care to avoid severe injury if they break. Never handle large pieces of glass or mirrors alone.
- When assembling products with electric cords, ensure the cord is unplugged before assembly and avoid twisting the cord.
- Use a step ladder when assembling shelves or entertainment centers; do not stand on lower shelves.
- Do not stand on tables, as they are not designed to support a person's weight.
- Assembly requiring two or more people should not be attempted alone due to risk of injury.
Liability Disclaimer: Ashley Furniture Industries, LLC disclaims any liability for damages or injuries resulting from failure to properly follow assembly instructions, properly assemble the product, or properly use the product.
Note: Your unit may look different from the illustrations.
Parts List
| Part Identifier | Description | Quantity |
|---|---|---|
| A | Table Top | 1 |
| B | Leg | 1 |
| C | Leg | 1 |
| D | Leg | 1 |
| E | Side Panel | 1 |
| F | Side Panel | 1 |
| G | Support Panel | 1 |
| H | Support Panel | 1 |
| J | Bolt (5/16" x 60mm) | 8 |
| K | Bolt (1/4" x 35mm) | 6 |
| L | Bolt (1/4" x 20mm) | 1 |
| M | T-Bracket | 1 |
| N | Screw (5x50mm) | 2 |
| P | Screw (3x20mm) | 3 |
| Q | Washer / Small Bolt (M4) | 4 |
| Tool | Not Included (e.g., Allen Key) | 1 |
Assembly Note: Unit should be assembled by two or more people. Do not tighten any bolts until all bolts have been started.
Assembly Instructions
Step 1
Attach legs (B, C, D) to the underside of the table top (A). Use four (4) bolts (J) and washers for each leg connection. Ensure the legs are oriented correctly as shown in the diagram. Do not fully tighten yet.
Diagram Description: Shows table top (A) upside down. Legs (B, C, D) are positioned at corners. Bolts (J) with washers are inserted through holes in the legs into the table top. A close-up shows the connection detail with bolt (J), washer, and leg.
Step 2
Attach side panels (F) to the assembled base. Use six (6) bolts (K) to secure the panels. Ensure the panels are aligned correctly. Do not fully tighten yet.
Diagram Description: Shows the partially assembled table frame. Side panel (F) is being attached to the frame. Bolts (K) are shown being inserted. A close-up shows the connection point with bolt (K) and panel (F).
Step 3
Attach support panels (G and H) to the frame. Use one (1) bolt (L) and a washer to secure panel (H) to the side panel (F). Panel (G) is also shown being positioned. Do not fully tighten yet.
Diagram Description: Shows the frame with side panels attached. Support panel (H) is being attached to the side panel (F) using bolt (L) and a washer. Panel (G) is also shown being positioned.
Step 4
Attach the T-bracket (M) to the underside of the table top (A) using two (2) screws (N). Attach the bracket (M) to the support structure using three (3) screws (P). Ensure the bracket is oriented as shown. Tighten all previously started bolts and screws securely.
Diagram Description: Shows the underside of the table top (A) and the assembled frame. T-bracket (M) is being attached to the table top with screws (N). The other end of bracket (M) is attached to the frame with screws (P). A close-up shows the attachment points. The diagram indicates to tighten all bolts.
Step 5
Flip the table upright. Adjust the feet (if applicable) to ensure the table is stable and level. The assembly is now complete.
Diagram Description: Shows the fully assembled table being flipped upright. Another view shows adjustable feet being turned to level the table.
Step 6
Final check of all connections to ensure they are tight.
Diagram Description: Shows the completed table from a different angle.
Replacement Parts & Support
For replacement parts or assistance, please contact:
- Email: RTAParts@ashleyfurniture.com
- Website: www.ashleyfurniture.parts
- Phone: 1-844-966-0809
