Signature Design by Ashley D629-32 Assembly Instructions
Important Safety Notice: Read carefully before beginning assembly!
- Always use proper tools.
- Follow assembly steps in order; do not skip any.
- Check packing materials for loose small parts. Contact retailer for missing parts; do not use substitute parts.
- Periodically check that all connectors (bolts, screws, etc.) are tight.
- Keep instructions for future reference.
- Handle glass or mirrors with extreme care to prevent injury from breakage. Never handle large pieces alone.
- For products with electrical cords, ensure the cord is unplugged before assembly and avoid twisting it during assembly.
- When assembling shelves or entertainment centers, use a step ladder and do not stand on lower shelves.
- Do not stand on tables, as they are not designed to support a person's weight.
- If assembly requires two or more people, do not attempt alone due to risk of injury.
Note: Your unit may look different in appearance from the one shown in the illustrations on this instruction sheet.
Contact Information:
- Replacement Parts: RTAParts@ashleyfurniture.com
- Website: www.ashleyfurniture.parts
- Phone: 1-844-966-0809
Parts List
| Part | Quantity | Description/Specification |
|---|---|---|
| A | 1 | Panel |
| B | 2 | Leaf Panel |
| C | 2 | Side Panel |
| D | 1 | Shelf |
| E | 2 | Top Panel |
| F | 2 | Base Plate |
| G | 4 | Bolt (5/16" x 82mm) |
| H | 18 | Bolt (5/16" x 45mm) |
| J | 1 | Allen Wrench (4mm) |
Assembly Steps
Step 1
Prepare the side panels (C) and top panels (E). Using the Allen Wrench (J) and Bolts (G), attach the top panels (E) to the side panels (C). Important: This unit should be assembled by two or more people. Do not tighten any bolts until all bolts have been started.
Step 2
Attach the shelf (D) to the side panels (C) using four (x4) Bolts (H) and the Allen Wrench (J).
Step 3
Attach the base plates (F) to the side panels (C) using six (x6) Bolts (H) and the Allen Wrench (J).
Step 4
Attach the panel (A) to the base of the assembled structure using eight (x8) Bolts (H) and the Allen Wrench (J).
Step 5
The main structure of the table is now assembled. Ensure all connections are secure.
Step 6 & 7 (Optional Leaf Attachment)
To add the optional leaf panel (B), carefully slide it into place between the extended sections of the table. The mechanism shown in the diagrams will secure the leaf. Follow the specific alignment indicated in the original illustrations to ensure a flush fit.
