D615-15 Assembly Instructions
Important Safety Notice
Read Carefully Before Beginning Assembly!
- Always use proper tools.
- Follow the assembly steps in order. Do not skip any steps.
- Check all packing materials carefully for small parts that may have come loose inside the carton during shipment. If parts are missing, contact the retailer from which you purchased the product to obtain any missing parts. DO NOT USE SUBSTITUTE PARTS.
- Periodically check to ensure that all connectors (bolts, screws, etc.) are tight.
- Keep the instructions for future reference.
- Some assembly may involve attaching glass or mirrors. Be very careful handling the glass or mirrors, as severe injury may result if the glass or mirror breaks. Never handle large pieces of glass or mirrors by yourself.
- When assembling products that have electrical cords (lamps, lights, motors, power strips, etc.), always (1) make sure the electrical cord is unplugged before assembling, (2) be careful not to twist or pinch the electrical cord during and after assembly, and (3) DO NOT USE AN EXTENSION CORD WITH THIS PRODUCT.
- Note: During charging, the device and the charger could heat up; this is normal. If the battery gets hotter than usual, the device may stop charging.
- WARNING: Remove all metal objects like coins and keys from the charging surface and remove any metal objects attached to your mobile phone before placing the device on the charging surface. Some mobile devices or cases may attract metal objects.
- When assembling shelves or entertainment centers, do not stand on lower shelves in order to assemble upper shelves – use a step ladder.
- Do not sit or stand on tables, including but not limited to, end tables, cocktail tables, and dining tables, as tables are not engineered or designed to support the weight of a person.
- Where assembly instructions state that the assembly requires two or more people, do not attempt by yourself as there is a risk of injury.
Disclaimer: ASHLEY FURNITURE INDUSTRIES, LLC disclaims any liability for damages or injuries which may occur due to failure to properly follow assembly instructions, properly assemble the product, or properly use the product.
Note: Your unit may look different in appearance from the one shown in the illustrations on this instruction sheet.
Parts List
| Part | Description | Quantity |
|---|---|---|
| A | Tabletop | 1 pc |
| B | Mounting Plates | 4 pcs |
| C | Leg Structure (star-shaped) | 1 pc |
| D | Small Connector Piece | 1 pc |
| E | Bolt (5/16" x 1 1/4") | 16 pcs |
| F | Bolt (5/16" x 2 3/4") | 1 pc |
| G | Allen Wrench (4mm) | 1 pc [Not Included] |
Assembly Steps
Important Assembly Note: The unit should be assembled by two or more people. Do not tighten any bolts until all bolts have been started!
Step 1: Assemble Leg Structure
Attach the leg structure (C) to the small connector piece (D) using one bolt (F) and the Allen wrench (G). This forms the main leg assembly.
Step 2: Attach Mounting Plates to Tabletop
Turn the tabletop (A) upside down. Attach the four mounting plates (B) to the underside of the tabletop (A). Secure each plate (B) with two bolts (E) using the Allen wrench (G). This step uses 8 bolts (E) in total.
Step 3: Attach Leg Assembly to Tabletop
Align the assembled leg structure (from Step 1) with the mounting plates (B) attached to the tabletop (A). Secure the leg structure to each mounting plate (B) using two bolts (E) per plate. This step uses the remaining 8 bolts (E) in total.
Step 4: Final Assembly and Leveling
Carefully turn the assembled table upright. If the table requires additional leveling after assembly, adjust the leveling feet located at the bottom of each leg. Turn the feet clockwise to retract them or counter-clockwise to extend them to achieve perfect stability.
Replacement Parts
For replacement parts, contact:
- Email: RTAParts@ashleyfurniture.com
- Website: www.ashleyfurniture.parts
- Phone: 1-844-966-0809
