Signature Design by Ashley D743-35 Assembly Instructions
Important Safety Information
Read carefully before beginning assembly!
- Always use proper tools.
- Follow the assembly steps in order. Do not skip any steps.
- Check all packing materials carefully for small parts that may have come loose inside the carton during shipment. If parts are missing, contact the retailer from which you purchased the product to obtain any missing parts. DO NOT USE SUBSTITUTE PARTS.
- Periodically check to ensure that all connectors (bolts, screws, etc.) are tight.
- Keep the instructions for future reference.
- When assembling products that have glass or mirrors, be very careful handling them, as severe injury may result if the glass or mirror breaks. Never handle large pieces of glass or mirrors by yourself.
- When assembling products with electric cords (lamps, light, etc.), always ensure the electrical cord is unplugged before assembly and be careful not to twist the electrical cord during assembly.
- When assembling shelves or entertainment centers, do not stand on lower shelves to assemble upper shelves; use a step ladder.
- Do not stand on tables, including end tables, coffee tables, and dinner tables, as tables are not designed to support the weight of a person.
- Where assembly instructions state that assembly requires two or more people, do not attempt by yourself as there is a risk of injury.
Note: Ashley Furniture Industries, LLC disclaims any liability for damages or injuries which may occur due to failure to properly follow assembly instructions, properly assemble the product, or properly use the product.
Note: Your unit may look different in appearance from the one shown in the illustrations on this instruction sheet.
Parts List
| Part Identifier | Description | Quantity |
|---|---|---|
| A | Tabletop Base | x1 |
| B | Extension Leaf | x1 |
| C | Legs | x4 |
| D | Bolts (5/16" x 75mm) | x8 |
| E | Bolts (5/16") | x8 |
| F | Bolts (5/16") | x8 |
| G | Allen Wrench | x1 |
| M4 | Bolts | Quantity not specified in list, but shown in diagram. |
Assembly Steps
Important Note: This unit should be assembled by two or more people. Do not tighten any bolts until all bolts have been started!
Step 1: Attach Legs to Tabletop Base
Attach the four legs (C) to the underside of the tabletop base (A). Use the provided bolts (D, E, F, and M4) and the Allen wrench (G) as indicated in the diagram. Ensure all bolts are started before tightening.
[Diagram Description: Shows the underside of the tabletop base (A) with four legs (C) being attached using bolts (D, E, F, M4) and an Allen wrench (G). Multiple attachment points are indicated.]
Step 2: Add Extension Leaf (Optional)
The extension leaf (B) can be added to the table. Follow the instructions to extend the table and insert the leaf into the designated slots. This process typically involves extending the table mechanism and then placing the leaf.
[Diagram Description: Shows the table being extended and the extension leaf (B) being inserted into the gap.]
Contact Information
For replacement parts or assistance, please contact:
- Email: RTAParts@ashleyfurniture.com
- Website: www.ashleyfurniture.parts
- Phone: 1-844-966-0809
